draft Directory Assistance Service Feb 91 Directory Assistance Service Tue Feb 5 17:35:01 1991 Marshall T. Rose Performance Systems International, Inc. mrose@psi.com 1. Status of this Memo This document defines a mechanism by which a user-interface may access a textual DAP-like interface over a TCP/IP connection. This is a local mechanism. M.T. Rose [Page 1] draft Directory Assistance Service Feb 91 2. Introduction The OSI Directory [1] provides a powerful infrastructure for the retrieval of information objects. This infrastructure can be used to support, e.g., white pages applications, application entity lookup, and so on. The Directory service is provided to applications through the Directory Access Protocol (DAP), which binds a Directory User Agent (DUA) to a Directory System Agent (DSA). | Directory Service | provided via DAP | +-----------+ | +-----------+ | | | | | | DUA | <----------+----------> | DSA | | | | | | +-----------+ | +-----------+ | Directory User | The DAP is an OSI application layer protocol which uses the rich OSI upper-layer infrastructure. Unfortunately, the coding investment to implement the DAP is significant. As such, it is difficult to host applications using the Directory on smaller workstations and personal computers. This memo details a local mechanism which has been successfully used to separate the functionality of the DAP from the complexity of implementing the DAP. That is, a split-DUA model is used: the DAP is implemented on an entity (the "Directory Assistant"), which resides on a capable workstation or mainframe and exports a simpler interface, the "Directory Assistance" (DA) protocol, to other end-systems where the user-interface resides, termed the DA-client. M.T. Rose [Page 2] draft Directory Assistance Service Feb 91 Since this mechanism provides assistance to applications wishing to access the Directory, it is termed the "Directory Assistance" (DA) service: | Directory Service split-DUA | provided via DAP | +-----------+ | +-----------+ | | | | | | Directory | <----------+----------> | DSA | | Assistant | | | | | | | +-----------+ +-----------+ | /|\ | | | | DA-service | | provide via | | DA-protocol | | | ------+------ | | | | | | | | | | | \|/ | +-----------+ | | | | | DA-client | | | | | +-----------+ | | Directory User | 2.1. An Aside This memo documents an already existing protocol, which was originally used to provide a split-DUA model within the same host. In the absence of detailed historical and implementational understanding, some of the mechanisms described may not appear intuitive. M.T. Rose [Page 3] draft Directory Assistance Service Feb 91 3. Protocol The DA service operates using two TCP connections: a control connection, and a data connection. The control connection defines the lifetime of an instance of the DA service; throughout this lifetime, several data connections may be established. However, at any given instant, between zero and one data connections will be in progress. The DA service is provided by the "Directory Assistant", which consists of two entities: a DA-server, which manages the control connection; and, a DAP-listener, which responds to commands on the data connection. The DA-server oversees the behavior of the DAP-listener. 3.1. Control Connection Data sent over the control connection consists of a series of transactions. NVT-ASCII is used to express these transactions. Each transaction consists of the client sending a directive--a line of text terminated by CR-LF; the DA-server returns a response--a line of text terminated by CR-LF. All responses from a DA-server start with either "+OK" or "-ERR" depending on whether the transaction was successful. 3.1.1. Initialization A DA-server listens on TCP port 411 for incoming connections. Upon establishing a control connection, the DA-server returns a response indicating whether the service has been started. If successful, the response contains an IP-address and a TCP port, expressed in NVT-ASCII, and separated by one or more instances of the space character. This information corresponds to the TCP-endpoint that the DAP-listener will use for the data connection. Note that the DA-server and DAP-listener need not reside at the same IP-address. In the future, DA-servers may employ a internal protocol for load-balancing purposes. If the DA service can not be started, an error response is returned and the control connection is closed. M.T. Rose [Page 4] draft Directory Assistance Service Feb 91 3.1.2. Transactions All transactions with the DA-server consist of a command followed by zero or more arguments, separated by the space character. 3.1.2.1. INTR command The INTR command takes no arguments. The INTR command is used to interrupt any DAP transaction currently in progress. The INTR command always returns success. 3.1.2.2. STAT command The STAT command takes no arguments. The STAT command is used to verify that the DAP-listener is available. The STAT command returns success only if the DAP-listener is still active. 3.1.2.3. QUIT command The QUIT command takes no arguments. The QUIT command is used to terminate the DA service. The QUIT command always returns success. M.T. Rose [Page 5] draft Directory Assistance Service Feb 91 3.2. Data Connection Data sent over a data connection consists of a single DAP- transaction. NVT-ASCII is used to express these transactions. Each transaction consists of the client sending a command--a line of text terminated by the LF-character; the DAP-listener returns zero or more responses, each with a specific termination sequence. All responses from a DAP-listener start with a single identifying character. If the character is a digit (0-9), then the termination sequence consists of a closing the data connection; otherwise, if the character is a lower-case letter (a-z), then the response is interactive and is terminated by the LF-character. 3.2.1. Transactions All transactions with the DAP-listener consist of a command followed by zero or more arguments, separated by the space character. Double-quotes may be used to prevent separation of tokens. The command set is taken from the DISH program: add add a new entry bind connect to the Directory compare compare entry's attribute delete delete an entry fred back-end to FrED list list children modify modify an existing entry modifyrdn modify an entry's name moveto move to a position search search for an object showentry show an entry showname show an entry's name squid status of dish unbind disconnect from the Directory See [2] for a complete list of commands and arguments. Note that commands and arguments are in lower-case, and may abbreviated to any unique prefix. M.T. Rose [Page 6] draft Directory Assistance Service Feb 91 3.2.2. Responses There are two kinds of responses: numeric-responses, which consist of arbitrary text; and, letter-responses, which consist of brief text, and expect further interaction from the client. 3.2.2.1. Numeric Responses If the response is '1', then the DAP-transaction terminated normally; if the response is '2', then the DAP-transaction failed; if the response is '3', then the DAP-transaction was a search returning more than one result and one of the -hitone or -list option was selected for the search; if the response is '4', then the DAP-transaction terminated normally and the remainder of this line consists of the name of an entry (see the 'd' Response below); if the response is '5', then all children of an entry were found by the DAP-transaction. Once the response is completely sent, the DAP-listener closes the data connection. Note that although numeric responses utilize ASCII, they are not NVT-ASCII; in particular, the LF-character is used to indicate end-of-line, rather than the CR-LF line termination sequence of NVT-ASCII. 3.2.2.2. 'm' Response The 'm' response contains a one-line message which should be presented to the user. At this point, the client returns a response consisting of 'm' followed by the LF-character. The client should then continue reading from the existing data connection. 3.2.2.3. 'y' Response The 'y' response contains a yes/no question which should be presented to the user. After querying the user, the response (either 'y' or 'n'), followed by the LF-character, should be sent to the DAP-listener. The client should then continue M.T. Rose [Page 7] draft Directory Assistance Service Feb 91 reading from the existing data connection. 3.2.2.4. 'p' Response The 'p' response contains a password-prompt which should be presented to the user. After querying the user, the client returns a response consisting of 'p' followed by the password supplied by the user followed by the LF-character. The client should then continue reading from the existing data connection. 3.2.2.5. 'e' Response The 'e' response is used to ask the user to edit some text. Following the 'e' character is a decimal number in ASCII followed by the LF-character, indicating the number of octets that should be presented to the user for editing (these octets may include LF-characters). At this point, the client returns a response consisting of a single character followed by a LF-character. If the character is 'e', the edit is aborted (e.g., the text is too large), and the client should then continue reading from the existing data connection. Otherwise, the DAP-listener sends the indicated number of octets corresponding to the buffer that the user is to edit. After the user edits the buffer, one of two responses should be sent. If the user aborted the edit, the response sent to the DAP- listener is a single character 'e', followed by the LF- character. Otherwise, the response consists of any single character other than 'e', and then a decimal number in ASCII followed by the LF-character, indicating the number of octets immediately following that resulted from the user-edit. Regardless of the outcome, the client should then continue reading from the existing data connection. M.T. Rose [Page 8] draft Directory Assistance Service Feb 91 3.2.2.6. 'l' Response The 'l' response contains an entry for a selection list to be presented to the user. The form of this entry consists of two strings separated by the '$' character, and terminated by the LF-character. The first string is a user-friendly name, suitable for display to the user; the second string is a fully-qualified Distinguished Name in textual format. At this point, the client returns a response consisting of 'l' followed by the LF-character. The client should continue to accumulate selection entries until an 'L' response is received, containing a prompt between the 'L' and the LF-character. At this point, the user should be asked to select one or more of the selection entries. After this selection, the client sends back a response consisting of 'L' followed by one or more decimal numbers in ASCII followed by the LF-character. The numbers are separated by spaces, and correspond to the entries selected by the user. (The entry corresponding to the first 'l' response is numbered 1, etc.) The client should then continue reading from the existing data connection. 3.2.2.7. 'd' Response The 'd' response contains a name that the client may be interested in. The form of this name consists of two strings separated by the '$' character, and terminated by the LF- character. The first string is a user-friendly name, suitable for display to the user; the second string is a fully- qualified Distinguished Name in textual format. At this point, the client returns a response consisting of 'd' followed by the LF-character. The client should then continue reading from the existing data connection. M.T. Rose [Page 9] draft Directory Assistance Service Feb 91 3.2.2.8. 'P' Response The 'P' response is used to transmit a picture to the client. Following the 'P' character is a decimal number in ASCII followed by a name and then the LF-character. The decimal number indicates the size of the picture. The name contains three strings separated by the '$' character. The first string is the name of the attribute corresponding to the picture, in textual format; the second string is a user- friendly name, suitable for display to the user; and, the third string is a fully-qualified DistingiushedName in textual format. At this point, the client returns a response consisting of a single character followed by a LF-character. If the character is 'P', the picture will not be sent (e.g., the image is too large), and the client should then continue reading from the existing data connection. Otherwise, the DAP-listener sends the indicated number of octets corresponding to the picture. The picture is encoded using the PBM format from the PBMPLUS package. Regardless of the outcome, the client should then continue reading from the existing data connection. M.T. Rose [Page 10] draft Directory Assistance Service Feb 91 4. Example Interaction In the text that follows, "S:" refers to the DA-server, "L:" refers to the DAP-listener, "C:" refers to the client talking to the DA-server, and, "I:" refers to the client talking to the DAP-listener. S: C: L: S: +OK 192.33.4.21 32867 I: I: bind -simple -user "@c=US@cn=Manager" L: pc=US@cn=Manager -- client asks user for password for "c=US@cn=Manager" I: psecret L: -- since response was null, client verifies that DAP-listener -- is still operating... C: STAT S: +OK I: I: fred -expand "@" L: 5 North America$l=North America US$c=US ... L: I: I: fred -ufn rose,psi,us L: 1 L: I: I: fred -ufn -list,rose,ps,us L: lHewlett-Packard, US$c=US@o=Hewlett-Packard I: l L: lPerformance Systems International, US$c=US@o=Performance... I: l M.T. Rose [Page 11] draft Directory Assistance Service Feb 91 L: lRutgers University, US$c=US@o=Rutgers University I: l L: Lps -- client presents selection list to user asking to select -- matches for 'ps', user selects the 2nd I: L 2 L: dManager, US$c=US@cn=Manager I: d L: 4Marshall Rose, ...$c=US@o=Performance... L: I: I: fred -ufn -list,schoffstall,ps,us L: 33 matches found. Martin Schoffstall, ...$c=US@o=Performance... Marvin Schoffstall, ...$c=US@o=Performance... Steve Schoffstall, ...$c=US@o=Performance... L: C: QUIT L: S: +OK C: S: M.T. Rose [Page 12] draft Directory Assistance Service Feb 91 5. References [1] Information Processing - Open Systems Interconnection - The Directory, International Organization for Standardization. International Standard 9594, (1988). [2] S.E. Kille, C.J. Robbins, M. Roe, A. Turland, The ISO Development Environment: User's Manual, Volume 5: QUIPU, Performance Systems International, (January, 1990). M.T. Rose [Page 13] draft Directory Assistance Service Feb 91 Table of Contents 1 Status of this Memo ................................... 1 2 Introduction .......................................... 2 2.1 An Aside ............................................ 3 3 Protocol .............................................. 4 3.1 Control Connection .................................. 4 3.1.1 Initialization .................................... 4 3.1.2 Transactions ...................................... 5 3.1.2.1 INTR command .................................... 5 3.1.2.2 STAT command .................................... 5 3.1.2.3 QUIT command .................................... 5 3.2 Data Connection ..................................... 6 3.2.1 Transactions ...................................... 6 3.2.2 Responses ......................................... 7 3.2.2.1 Numeric Responses ............................... 7 3.2.2.2 'm' Response .................................... 7 3.2.2.3 'y' Response .................................... 7 3.2.2.4 'p' Response .................................... 8 3.2.2.5 'e' Response .................................... 8 3.2.2.6 'l' Response .................................... 9 3.2.2.7 'd' Response .................................... 9 3.2.2.8 'P' Response .................................... 10 4 Example Interaction ................................... 11 5 References ............................................ 13 M.T. Rose [Page 14]