# makefile / Makefile / ckuker.mak / CKUKER.MAK # # Sun Aug 21 10:33:08 2011 BUILDID=20110821 CKVER= "9.0.302" # # -- Makefile to build C-Kermit for UNIX and UNIX-like platforms -- # # Copyright (C) 1985, 2011, # Trustees of Columbia University in the City of New York. # All rights reserved. See the C-Kermit COPYING.TXT file or the # copyright text in the ckcmai.c module for disclaimer and permissions. # In case you can't find the COPYING.TXT file, it contains the # Simplified 3-Clause BSD License, which is an Open Source license. # # Author: Frank da Cruz, Columbia University # 612 West 115th Street, New York NY 10025-7799, USA # Email: fdc@columbia.edu # Web: http://kermit.columbia.edu/ # FTP: ftp://kermit.columbia.edu/kermit/ # # Note: Author is no longer at Columbia University or at the 115th Street # address effective 1 July 2011. The email address should still work, # as well as the website and FTP addresses, for the foreseeable future. # For new developments, also check: # # http://www.columbia.edu/~fdc/kermit/ # # Contributions from many others. Special thanks to Jeff Altman for the # secure-build targets, Peter Eichhorn, assyst GmbH, for the consolidated # HP-UX targets and the "uninstall" target, to Robert Lipe for the updated # and consolidated SCO UNIX / ODT / OSR5 targets, to Ric Anderson for the # IRIX 6.x targets, to Seth Theriault for major improvements to the # Mac OS X targets, and to Alexey Dokuchaev for FreeBSD 9.0. # # C-Kermit is written and produced by hand without any automated procedures # such as autoconf / automake / configure, although some of the targets below # (especially the linux target) inspect the environment and make some # decisions in the most portable way possible. The automated tools are not # used because (a) C-Kermit predates them, and (b) they are not portable to # all the platforms where C-Kermit must be (or once was) built, and (c) to # keep C-Kermit as independent as possible from external tools over which # we have no control. # # Most entries use the "xermit" target, which uses the select()-based CONNECT # module, ckucns.c. The "wermit" target uses the original fork()-based CONNECT # module, ckucon.c, which has some drawbacks but was portable to every Unix # variant whether it had TCP/IP or not (select() is part of the TCP/IP # library, which was not standard on older Unixes). If your target still uses # the "wermit" target, please try substituting the "xermit" one and if it # works, let us know (mailto:kermit-support@columbia.edu). When changing a # target over from wermit to xermit, also remove -DNOLOEARN. # # CAREFUL: Don't put the lowercase word "if", "define", or "end" as the first # word after the "#" comment introducer in the makefile, even if it is # separated by whitespace. Some versions of "make" understand these as # directives. Uppercase letters remove the danger, e.g. "# If you have..." # # WARNING: This is a huge makefile. Although this is less likely since the # turn of the century, some "make" programs might run out of memory. If this # happens to you, edit away the parts that do not apply to your platform and # try again. # # WARNING 2: In many cases this file invokes itself recursively, sometimes # several levels deep (as in the Linux targets); i.e. some targets are used # as 'subroutines' of other targets, with parameters passed by setting # environment variables. For that reason, don't use 'make -e'. # # Certain UNIX variations have their own separate makefiles: # . For 2.10 or 2.11 BSD on the DEC PDP-11, use ckubs2.mak. # . For Plan 9, use ckpker.mk. # # Separate build procedures are provided non-UNIX platforms: VMS, VOS, # AOS/VS, etc. See the ckaaaa.txt file or the Kermit website for details. # # # DIRECTIONS FOR UNIX # # Rename this file to "makefile" or "Makefile" if necessary. Pick out the # entry most appropriate for your UNIX version from the list below and then # give the appropriate "make" command, for example "make aix", "make macosx", # "make linux". If you experience any difficulties with the build procedure, # then please also read any comments that accompany the make entry itself # (search for the make entry name on the left margin). # # Other targets: # 'make install' is an installation script (read accompanying comments!). # 'make uninstall' undoes 'make install' (read accompanying comments!). # 'make clean' removes intermediate and object files. # 'make show' tells the default include and lib paths for secure builds. # # IMPORTANT: # For more detailed installation instructions, read the files ckuins.txt # and ckccfg.txt, also available at the Kermit website in HTML form: # http://www.columbia.edu/kermit/ckuins.html # http://www.columbia.edu/kermit/ckccfg.html # # For descriptions of known problems and limitations, # read the files ckcbwr.txt and ckubwr.txt (the "beware files") or: # http://www.columbia.edu/kermit/ckcbwr.html # http://www.columbia.edu/kermit/ckubwr.html # # Most targets build C-Kermit with its symbol table included. To reduce the # size of the executable program, add "LNKFLAGS=-s" to the end of your 'make' # command or to the makefile entry, or 'strip' the executable after # building. To further reduce the size after building, use 'mcs -d' if your # Unix version has such a command. For further details on size reduction, read # ckccfg.txt to find out how to remove features that you don't need. # # TCP/IP networking support: If your C-Kermit version does not include TCP/IP # networking, but your UNIX system does, try adding -DTCPSOCKET to the CFLAGS # of your makefile entry. If that doesn't work, look at some of the other # targets that include this flag for ideas about what libraries might need to # be included (typically -lsocket and/or -lBSD and/or -lnsl and/or -linet). # NOTE: In some cases (old versions of SCO or HP-UX), you might need not only # a C compiler, but also a "TCP/IP developers kit" for the required object # libraries and header files. # # Please report modifications, failures (preferably with fixes) or successes # to the author, fdc@columbia.edu. # # TARGETS FOR DIFFERENT UNIX PLATFORMS AND VERSIONS: # # + Marks those that have been built successfully for C-Kermit 9.0 or later. # - Those that once built OK but no longer do (e.g. too big). # ? Those that worked in a previous version but have not been tested recently. # -------------------------- # Some commonly used targets: # # + "make linux" should work for any version of Linux on any hardware. # + "make linux+ssl" ditto, with OpenSSL security added. # + "make linux+krb5" ditto, with Kerberos 5 security added. # + "make linux+krb5+ssl" Linux with OpenSSL and Kerberos 5. # + "make netbsd", NetBSD, any version. # + "make netbsd+ssl", NetBSD with OpenSSL 0.9.7 or later. # + "make netbsd+krb5", NetBSD with Kerberos 5. # + "make netbsd+krb5+ssl", NetBSD with Kerberos 5 and OpenSSL 0.9.7 or later. # ? "make freebsd1" for FreeBSD 1.x # ? "make freebsd2" for FreeBSD 2.x # + "make freebsd3" for FreeBSD 3.x # ? "make freebsd4" for FreeBSD 4.0 # + "make freebsd", FreeBSD 4.1 or later. # + "make freebsd+ssl", FreeBSD 5.0 or later with OpenSSL 0.9.7 or later. # + "make openbsd", OpenBSD 2.3 or later. # + "make openbsd+ssl", OpenBSD 2.3 or later with OpenSSL 0.9.7 or later. # + "make mirbsd", MirBSD. # + "make mirbsd+ssl", MirBSD with OpenSSL 0.9.7 or later. # + "make macosx" should work for any Mac OS X version 10.3.9 or later. # + "make macosx+krb5+openssl" Mac OS X 10.3.9 or later + Kerberos V + OpenSSL. # + "make aix" should work for any version of AIX 4.2 or later. # + "make aixg" should work for any version of AIX 4.2 or later, using gcc. # + "make aix+ssl" ditto, with OpenSSL (specifying SSLLIB and SSLINC) # + "make aix+ibmssl" ditto, with IBM OpenSSL # + "make solaris9", "make solaris10" for Solaris 9 or 10 with Sun cc. # + "make solaris9g", "make solaris10g" for Solaris 9 or 10 with gcc. # + "make solaris11" for Solaris 11 with Sun CC # + "make solaris11g" for Solaris 11 with gcc # + "make sco_osr600" for SCO OpenServer 6.0.0. # # For other current OSs such as Solaris, HP-UX, and SCO there are separate # targets for different combinations of OS version and compiler; see the # complete list. For older OS's see the complete list. If an old target # doesn't work in this release of C-Kermit you can get a previous release from # the Kermit FTP site: ftp://kermit.columbia.edu/kermit/ # # SECURE TARGETS (versions that support authentication and encryption) # are described after the following list. Search for ******* below. # # -------------------------- # Complete list (alphabetical): # ? for 386BSD (Jolix) 0.0, 0.1, "make 386bsd" (see comments in entry), # or (preferably, if it works) "make bsd44" or "make bsd44c". # ? for Acorn RISCiX, "make riscix" or "make riscix-gcc" # ? for Alliant FX/8 with Concentrix 4.1 or later, "make bsdlck" # ? for Altos 486, 586, 986 with Xenix 3.0, "make altos" # ? for Altos ACS68000, 8Mhz 68000, UNIX System 3 Rel 2, 512K, "make altos3" # ? for Amdahl UTS 2.4 on IBM 370 series & compatible mainframes, "make uts24" # ? for Amdahl UTSV IBM 370 series & compatible mainframes, "make utsv" # ? for Amdahl UTSV IBM 370 series mainframes with TCP/IP, "make utsvtcp" # ? for Amdahl mainframes with UNIX System V R 5.2.6b 580, "make sys3" # ? for Apollo Aegis 9.x, DOMAIN/IX 9.x, "make aegis" # (Last tested in C-Kermit 5A(189)) # ? for Apollo DOMAIN/IX, if the above fails, try "make apollobsd" # ? for Apollo with SR10.0 or later, BSD environment, "make sr10-bsd" # ? for Apollo with SR10.0 or later, System V environment, "make sr10-s5r3" # ? for Apple Macintosh II with A/UX pre-3.0, "make aux", "auxgcc" or "auxufs" # ? for Apple Macintosh with A/UX 3.0 and gcc, "make aux3gcc" or aux3gccc # ? for Apple PowerMac with MkLinux, "make mklinux" (read Linux entry first) # ? for Apple PowerMac with LinuxPPC, "make linuxppc" # ? for Apple Macintosh with Minix 1.5.10, "make minix68k" or "make minixc68" # ? for Apple Macintosh with Mac OS X 1.0 (Rhapsody), "make macosx10" # (no curses), "make macosx10c" (curses), or "make macosx10nc" (ncurses). # Or "make macosx10ncx" (ncurses but "make macosx10nc" doesn't work). # ? for Apple Macintosh with Mac OS X 10.2, "make macosx102nc" (ncurses). # ? for Apple Macintosh with Mac OS X 10.3, "make macosx103" # ? for Apple Macintosh with Mac OS X 10.3.9 or later, "make macosx" # ? for Arix System 90 with AT&T SVR3, "make sys5r3na" # - for AT&T 6300 with IN/ix, "make sys5" # - for AT&T 6300 PLUS, "make att6300" or (with no debugging) "make att6300nd" # ? for AT&T 6386 WGS UNIX PC, "make sys5r3" # ? for AT&T 3B2, 3B20 systems, "make att3b2". # for AT&T 3B1, 7300 UNIX PC (see notes with the entries): # In C-Kermit 7.0, only the gcc entries work: # ? "make sys3upcg", "make sys3upcgc", "make att351gm" # The others fail with "too many defines" (usually in ckuusr.h): # - "make sys3upc", "make sys3upcold", "make sys3upcc", "make sys3upcx", # "make sys3upcm", "make att351m" # ? for AT&T System III/System V R2 or earlier, "make sys3" or "make sys3nid" # ? for AT&T System III/System V with Honey DanBer UUCP, "make sys3hdb" # ? for AT&T System V on DEC VAX, "make sys3" or "make sys5r3" # ? for AT&T System V R3, use "make sys5r3" or "make sys5r3c" # ? for AT&T System V/386 R3.2 built on Interactive 4.1.1, "make sys5r32is". # ? for AT&T System V/386 R320.0 Versyss Systems, use "make sys5r3" # or "make sys5r3c". # ? for AT&T System V R4, "make sys5r4", "make sys5r4sx", or "make sys5r4nx", # or if the ANSI C function prototyping makes trouble, add -DNOANSI, # as in "sys5r4sxna" entry # ? for AT&T (USL) System V R4.2 use the sys5r4* entries. # ? for Atari Falcon with MiNT, "make posix" # ? for Atari ST with Minix ST 1.5.10.3, "make minix68k" or "make minixc68" # ? for BBN C/70 with IOS 2.0, "make c70" # ? for BeBox with Be OS 1.x DR7, "make beboxdr7" # Compiles OK but doesn't link with default linker which is limited to 64K. # Links OK with "Code Warrior Gold". Many hacks in the source code need # to be removed when DR8 and later come out. # (Last tested in C-Kermit 6.0) # - for BeBox with Be OS 1.x DR8, "make bebox" # (Needed functions missing from operating system and/or not working.) # - for Bell Labs UNIX Version 6 (6th Edition), there is no makefile entry. # ? for Bell Labs UNIX Version 7 (7th Edition), "make v7" (but see notes below) # (last built successfully in C-Kermit 5A188) # ? for Bell Labs Research UNIX Version 10, "make bellv10" # (last built successfully in C-Kermit 6.0) # ? for Bell Labs / Lucent Plan 9, use separate makefile ckpker.mk: # can be built for Intel, MIPS, 680x0, and PowerPC (last built C-Kermit 7.0) # ? for BSDI BSD/386 1.x, "make bsdi" # ? for BSDI BSD/OS 2.x, "make bsdi2" # ? for BSDI BSD/OS 3.0 or 3.1, "make bsdi3" # ? for BSDI BSD/OS 4.x, "make bsdi4" # ? for BSDI BSD/OS 4.x, to build a binary that also works on FreeBSD, # "make bsdix". # ? for Berkeley Unix 2.4, "make v7" (but read v7 material below) # ? for Berkeley Unix 2.9 (DEC PDP-11 or Pro-3xx), "make bsd29" # - for Berkeley Unix 2.10, use ckubs2.mak (a separate makefile) # - for Berkeley Unix 2.11, use ckubs2.mak (a separate makefile) # This makefile is too big. Read the instructions in ckubs2.mak. # "make -f ckubs2.mak bsd210" or "make -f ckubs2.mak bsd211". # (last built successfully in C-Kermit 6.0 - later versions too big) # ? for Berkeley Unix 2.11 "make -f ckubs2.mak bsd210noicp" (no command parser) # ? for Berkeley Unix 4.1, "make bsd41" # ? for Berkeley Unix 4.2 on VAX, "make bsd42" or "make bsd42c" # ? for Berkeley Unix 4.2 or 4.3 with HoneyDanBer UUCP, "make bsdhdb" # ? for Berkeley Unix 4.3 on VAX, "make bsd43", "make bsd43nc". # ? for Berkeley Unix 4.3 on VAX, no networking "make bsd43nonet. # ? for Berkeley Unix 4.3 without acucntrl program, "make bsd42" or "bsd42c" # NOTE: all the C-Kermit 7.0 full builds for old BSDs fail with # "too many defines" in CPP, even on big architectures like VAX. This # can be worked around with a clever ruse. See comments at target. # ? for Berkeley Unix 4.3, command-line only, "make bsdm". # ? for Berkeley Unix 4.3-Tahoe, same as 4.3 BSD # ? for Berkeley Unix 4.3-Reno, "make bsd43" or "make bsd44" or "make bsd44c" # ? for Berkeley Unix 4.3-Carson City, "make bsd44" or "make bsd44c" # ? for Berkeley Unix 4.4-Networking/2 or -Alpha, "make bsd44" or "make bsd44c" # ? for Berkeley Unix 4.4, "make bsd44" or "make bsd44c" # ? for Berkeley Unix 4.4-Lite, "make bsd44" or "make bsd44c" # ? for Bull DPX/2 with BOS/X, "make bulldpx2" # ? for Cadmus, "make sys3" # for Caldera, see SCO, Linux. # ? for Callan Unistar, "make sys3" # ? for CDC VX/VE 5.2.1 System V emulation, "make vxve" # ? for Charles River Data Systems Universe 680x0 with UNOS 9.2, maybe # also other UNOS versions, "make crds" # ? for CIE Systems 680/20 with Regulus, "make cie" # ? for Commodore Amiga 3000UX Sys V R4, "make sys5r4sx" # ? for Commodore Amiga 3000UX Sys V R4 and TCP/IP, "make svr4amiganet" # ? for Commodore Amiga with Minix 1.5.10, "make minix68k" of "make minixc68" # ? for Concurrent/Masscomp with RTU 4.0 or later, BSD environment, "make # rtubsd", "make rtubsd2", "make rtubsd3" (depending on where ndir.h # is stored, see entries below). # ? for Concurrent/Masscomp with RTU 4.0 or later, System V R2, "make rtus5" # ? for Concurrent (Perkin-Elmer) 3200 series, "make sys5". # ? for Concurrent (Perkin-Elmer) 3200 series with , "make ccop1" # ? for Concurrent PowerMAX OS SVR4, "make powermax" # ? for Consensys UNIX SV/386 R4V3, "make sys5r4sxtcpc" or "make sys5r4sx" # ? for Convergent with CTIX Sys V R2, "make sys5" # ? for Convergent with CTIX 6.4.1, "make ctix" # ? for Convex C1, "make convex" # ? for Convex C210 with Convex/OS 8, "make convex8" # ? for Convex C2 with Convex/OS 9.1, "make convex9" # ? for Convex C2 with Convex/OS 10.1 and gcc 2.x, "make convex10gcc" # ? for Cray Research X/MP or YMP or C90 with UNICOS 6.x (System V R3), # "make cray" # ? for Cray Research X/MP or YMP or C90 with UNICOS 7.x (System V R4), # "make cray" # ? for Cray Research X/MP or YMP or C90 with UNICOS 8.0 Alpha, "make cray8" # ? for Cray Research X/MP or Y-MP or C90 with UNICOS 9.0, "make cray9" # ? for Cray Computer Cray-2 or Cray3 with CSOS, "make craycsos" # ? for Cyber 910 (Silicon-Graphics Iris) with Irix 3.3, "irix33" # ? for Data General AViiON with DG/UX 5.4 before R3.00, "make dgux540" # or "make dgux540c" (compile ckwart separately if necessary) # ? for DG/UX 5.4 on AViiON Intel models, "make dgux540i" or dgux540ic. # ? for DG/UX 5.4R4.11 on AViiON, all models, "make dgux54411" # ? for DG/UX 5.4R4.20 on AViiON, all models, "make dgux54420" # ? for Data General AViiON with DG/UX 4.3x using Sys V-isms, "make dgux430" # ? for Data General AViiON with DG/UX 4.3x using BSD-isms, "make dgux430bsd" # ? for Data General AViiON, earlier UNIX versions, # "make sys5r3" (maybe compile ckwart separately, or "touch ckcpro.c") # ? for Data General MV systems with DG/UX, ??? # ? for Data General MV systems with MV/UX, use AOS/VS C-Kermit (CKDKER.MAK) # ? for Data General MV systems with AOS/VS, use CKDKER.MAK (last = C-K 7.0) # ? for DEC PDP-11 with Berkeley UNIX 2.x, see Berkeley UNIX 2.x. # ? for DEC PDP-11 with Mini-UNIX (Bell 6th Edition for PDP-11 with no MMU), # probably no way to fit C-Kermit without I&D space. # ? for DEC PDP-11 with Ultrix-11 3.x, ??? (probably needs overlays) # ? for DEC VAX with Ultrix 1.x "make bsd" # ? for DEC VAX with Ultrix 2.x "make ultrix2x" # ? for DEC VAX or DECstation with Ultrix 3.0, 3.1, "make ultrix3x" # ? for DECstation or VAX with Ultrix 4.0 or 4.1, "make ultrix40" # ? for DECstation or VAX with Ultrix 4.2, "make ultrix42" or "make ultrix42c" # ? for DECstation or VAX with Ultrix 4.x, POSIX world, "make posix" # ? for DECstation or VAX with Ultrix 4.3, "make ultrix43". # ? for DECstation or VAX with Ultrix 4.4, "make ultrix44". # ? for DECstation 5000/50, /150 or /260 (R4x00 MIPS CPU), Ultrix 4.3A or later # "make ultrix43-mips3" or "make ultrix43c-mips3" # ? for DECstation (MIPS) with Berkeley Sprite, "make bsd44"? # ? for DECstation (MIPS) with OSF/1 V1.0 to 1.3, "make dec-osf" # ? for DEC Alpha with OSF/1 1.0 to 1.3, "make dec-osf" # ? for DEC PC 486 with OSF/1, "make dec-osf" # ? for DEC Alpha with OSF/1 2.x, "make dec-osf20" # ? for DEC Alpha with OSF/1 3.0, "make dec-osf30" # ? for DEC Alpha with Digital UNIX 3.2, "make du32" # ? for DEC Alpha with Digital UNIX 4.0-4.0D, "make du40" or "make du40gcc" # ? for DEC Alpha with Digital UNIX 4.0E or higher, see Tru64. # + for DEC Alpha with any version of DU or OSF/1, "make dec-osf1" # - for DEC Pro-350 with Pro/Venix V1.x, "make provx1" (version 5A is too big) # ? for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid" # ? for DEC Pro-380 with 2.9, 2.10, or 2.11 BSD, "make bsd29" or "make bsd210" # for DEC PDP-11 with 2.xBSD (use separate makefile ckubs2.mak) # ? for Dell UNIX Issue 2.x (= USL Sys V/386 R4.x + fixes), "make dellsys5r4" # or "make dellsys5r4c" (last tested in C-Kermit 5A). # ? for DIAB DS90 with DNIX (any version) create an empty if # this file does not already exist (or add -DNOFILEH to the make entry). # ? for DIAB DS90 with DNIX 5.2 (Sys V.2) or earlier, "make dnix", # "make dnixnd", or (to add curses and TCP/IP) "make dnixnetc", # ? for DIAB DS90 with DNIX 5.3 (Sys V.3), "make dnix5r3" # ? for DIAB DS90 with DNIX 5.3 (Sys V.3) and TCP/IP, "make dnix5r3net" # ? for DIAB DS90 with DNIX 5.3 2.2 (Sys V.3), ANSI C, "make dnix5r3ansi" # or, to include TCP/IP, "make dnix5r3ansinet", # but you have to fix a bug in /usr/include/stdlib.h first: # change "extern void free(char *str);" to "extern void free(void *str);" # ? for Dolphin Server Technology Triton 88/17 with SV/88 R3.2, "make sv88r32" # ? for Encore Multimax 310, 510 with Umax 4.2, "make umax42" # ? for Encore Multimax 310, 510 with Umax 4.3, "make umax43" # ? for Encore Multimax 310, 510 with Umax V 2.2, use Berkeley cc, "make bsd" # ? for Encore 88K with Umax V 5.2, "make encore88k" # ? for ESIX System V R4.0.3 or 4.04 with TCP/IP support, "make esixr4" # NOTE: You can also build on Unixware 2.x with "make esixr4", and run # on ESIX, but there you must first: # ln /usr/lib/libsocket.so /usr/lib/libsocket.so.1 # ln /usr/lib/libnsl.so /usr/lib/libnsl.so.1 # (This worked for C-Kermit 6.0 but does not work for 7.0) # (But you can probably still build a non-networking version this way) # ? for Everex STEP 386/25 Rev G with ESIX Sys V R3.2D, "make sys5r3" # ? for Fortune 32:16, For:Pro 1.8, "make ft18" # ? for Fortune 32:16, For:Pro 2.1, "make ft21" # ? for FPS 500 with FPX 4.1, "made bsd" # ? for FreeBSD 1.0, "make freebsd1" # ? for FreeBSD 2.x, "make freebsd2" (ncurses) or "make freebsd2c" (curses) # ? for FreeBSD 3.x, "make freebsd3" (ncurses) or "make freebsd3c" (curses) # ? for FreeBSD 4.0, "make freebsd40" # ? for FreeBSD 4.1 or later, "make freebsd" # + NOTE: Just use "make freebsd" for any reasonably recent FreeBSD version. # ? for Harris HCX-2900, "make sys5r3" # ? for Harris Night Hawk 88K or 68K with CX/UX pre-6.1, "make sys5r3" # ? for Harris Night Hawk 88K or 68K with CX/UX 6.1 or later, "make cx_ux" # ? for Heurikon, "make sys3" # ? for HP-3000, MPE/ix, "make posix"? # ? for HP-9000 Series 300 with 4.4BSD, "make bsd44" # NOTE: Most of the HP-UX targets were tested successfully in 2010. # Verification needed for C-Kermit 9.0 Beta.01... # ? for HP-9000 Series 500, HP-UX 5.21 and no networking "make hpux0500" # ? for HP-9000 Series 500, HP-UX 5.21 with WIN/TCP 1.2 "make hpux0500wintcp" # ? for HP-9000 Series, HP-UX 6.5, without long filenames, # "make hpux0650", "make hpux0650c" or "make hpux0650tcpc" # ? for HP-9000 Series, HP-UX 7.0 or later no long filenames, "make hpux0700sf" # or (to include tcp/ip, curses, etc) "make hpux0700sftcpc" # ? for HP-9000 Series with HP-UX 7.0, TCP/IP,long filenames,"make hpux0700lfn" # ? for HP-9000 300/400 Series (680x0) with HP-UX 8.0, TCP/IP, "make hpux0800" # or "make hpux0800c" # ? for HP-9000 700/800 Series (PA-RISC), HP-UX 8.0, TCP/IP, "make hpux0800pa" # or "make hpux0800pac" # ? for HP-9000 Series with HP-UX 8.0, no TCP/IP, long filenames, # "make hpux0800notcp" # ? for HP-9000 Series, HP-UX 9.0 - 9.10, TCP/IP, curses, restricted compiler # (no optimization, no ANSI), all models, "make hpux0900". Read the # hpux0900 entry below for more info. # ? for HP-9000 700 and 800 Series, HP-UX 9.x, TCP/IP, curses, # HP optimizing ANSI C compiler, "make hpux0900o700". # ? for HP-9000 with Motorola CPUs, HP-UX 9.x, TCP/IP, curses, # HP optimizing ANSI C compiler, "make hpux0900mot". # ? for HP-9000 on other CPUs, HP-UX 9.x, TCP/IP, curses, # HP optimizing ANSI C compiler, "make hpux0900o". # ? for HP-9000 series, HP-UX 9.x, TCP/IP, curses, gcc, all models, # "make hpux0900gcc" # ? for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP, # curses, restricted compiler (no optimization, no ANSI) "make hpux1000". # ? for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP, # curses, HP ANSI/optimizing compiler "make hpux1000o" or "make hpux1000o+" # ? for HP-9000 HP-UX 10.00 or later with gcc, "make hpux1000gcc" # ? for Trusted HP-UX 10.xx "make hpux1000t", "make hpux1000to", # or make hpux1000to+" # ? for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler # (no optimization, no ANSI) "make hpux1100". # ? for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler # HP ANSI/optimizing compiler "make hpux1100o" or "make hpux1100o+" # ? for Trusted HP-UX 11.xx "make hpux1100t", "make hpux1100to", # make hpux1100to+" # ? for HP-9000 PA-RISC models with NeXTSTEP 3.3, "make nextquadfat". # ? for HP-9000 PA-RISC models with OPENSTEP/Mach 4.1, "make nextquadfat". # ? for IBM 370 Series with IX/370, "make ix370" # ? for IBM 370 Series with AIX/370 1.2, "make aix370" # ? for IBM 370 Series with AIX/370 3.0, "make aix370" # ? for IBM 370 Series with AIX/ESA 2.1, "make aixesa" # - for IBM PC/AT 286 & compatibles with Mark Williams Coherent OS, # command-line-only version, "make coherent" (version 5A & later too big) # ? for IBM PC 386 & compatibles with Mark Williams Coherent OS, # minimum interactive version, "make coherentmi" # ? for IBM PC 386 & compatibles with Mark Williams Coherent OS, # full interactive version, prior to v4.2, "make coherentmax" # ? for IBM PC 386 & compatibles with Mark Williams Coherent OS 4.2, # "make coherent42" # ? for IBM PC 386 & compatibles with LynxOS 2.0 or 2.1, "make lynx21" # ? for IBM PC 386 & compatibles with LynxOS 2.2, "make lynx" # - for IBM PC/AT & compatibles with original MINIX, "make minix" (too big) # ? for IBM PC family, 386-based, with MINIX/386 1.5, "make minix386" # or if you have GNU CC, "make minix386gcc" # ? for IBM PC family, 386-based, with MINIX 2.0, "make minix20" # ? for IBM PC family, 386-based, with MINIX 3.0, "make minix3" # + for IBM PC family, 386-based, with MINIX 3.0, "make minix315" # ? for IBM PS/2 with PS/2 AIX 1.0, 1.1, or 1.2, "make ps2aix" or ps2aixnetc. # ? for IBM PS/2 with PS/2 AIX 1.3, "make ps2aix3" # ? for IBM RISC System/6000 with AIX 3.0, "make aix30" # ? for IBM RISC System/6000 with AIX 3.1.x, "make aix31" # ? for IBM RISC System/6000 with AIX 3.2.0 thru 3.2.5, "make aix32" # ? for IBM RS/6000 or Power Series with AIX 4.1.x, "make aix41" # ? for IBM RS/6000 or Power Series with AIX 4.1.x with gcc, "make aix41g" # ? for IBM RS/6000 or Power Series with AIX 4.1 with X.25, "make aix41x25" # ? for IBM RS/6000 or Power Series with AIX 4.2 or later: "make aix" # (the following "make aixnn" targets are no longer necessary except for gcc) # ? for IBM RS/6000 or Power Series with AIX 4.2, "make aix42" # ? for IBM RS/6000 or Power Series with AIX 4.3, "make aix43" (or aix43gcc) # ? for IBM RS/6000 or Power Series with AIX 4.4, "make aix44" (or aix44gcc) # ? for IBM RS/6000 or Power Series with AIX 4.5, "make aix45" (or aix45gcc) # ? for IBM RS/6000 or Power Series with AIX 5.0, "make aix50" (or aix50gcc) # ? for IBM RS/6000 or Power Series with AIX 5.1, "make aix51" (or aix51gcc) # ? for IBM RS/6000 or Power Series with AIX 5.2, "make aix52" (or aix52gcc) # ? for IBM RS/6000 or Power Series with AIX 5.3, "make aix53" (or aix53gcc) # ? for IBM RS/6000 or Power Series with AIX 6.1, "make aix61" (or aix53gcc) # ? for IBM RT PC with AIX 2.1, "make sys3" # ? for IBM RT PC with AIX 2.2.1, "make rtaix" or "make rtaixc" # ? for IBM RT PC with ACIS 4.2, "make bsd" # ? for IBM RT PC with ACIS 4.3, "make rtacis" or "make bsd KFLAGS=-DNOANSI" # ? for IBM RT PC with 4.3BSD/Reno, "make bsd44" or "make bsd44c" # ? for ICL DRS400 or 400E, "make iclsys5r3" # ? for ICL DRS3000 (80486) with DRS/NX, "make iclsys5r4_486" # ? for ICL DRS6000 (SPARC) with DRS/NX, "make iclsys5r4" # ? for ICL DRS6000 (SPARC) with DRS/NX 4.2MP 7MPlus, "make iclsys5r4m+" # ? Ditto but with IKSD support included, "make iclsys5r4m+iksd" # ? for Integrated Solutions Inc V8S VME 68020, "make isi" # ? for Intel 302 with Bell Tech Sys V/386 R3.2, "make sys5r3" # ? for Intel Xenix/286, "make sco286" # ? for Interactive System III (PC/IX), "make pcix" or "make is3" # ? for Interactive System III (PC/IX) with gcc, "make is3gcc" # ? for Interactive 386/ix 1.0.6 with TCP/IP networking, "make is5r3net2" # ? for Interactive 386/ix 2.0.x, "make is5r3" or (POSIX) "make is5r3p" # ? for Interactive 386/ix 2.0.x with TCP/IP networking, "make is5r3net" # or "make is5r3net2" # ? for Interactive 386/ix 2.2.1, job control, curses, no net, gcc, # "make is5r3gcc" # ? for Interactive UNIX Sys V R3.2 V2.2 - 4.0 without TCP/IP, "make is5r3jc" # ? for Interactive UNIX Sys V R3.2 V2.2 - 4.0 with TCP/IP, "make is5r3netjc" # ? for Intergraph Clipper, "make clix" or "make clixnet" # ? for Jolix (see 386BSD) # + for Linux 1.2 and later, "make linux". Uses ncurses. This version # handles serial speeds up to 460800 bps, Linux FSSTD 1.2, TCP/IP, and # should work on both libc and glibc systems. For static linking, use # "make linux LNKFLAGS=-static". Please read the comments that accompany # the linux entry. As of 8.0.212 Dev.10, this also includes Large File # Support (LFS). # + for Linux builds that fail with "sys/select.h: No such file or directory", # "make linuxns" # + for Linux 1.2 and later but with curses.h and libcurses (rather than # ncurses.h and libncurses), use "make linuxc". # + for Linux 1.2 and later with no curses support at all, "make linuxnc". # + for Linux with no TCP/IP, "make linuxnotcp" # (The following Linux targets are historic and might not work...) # ? for Red Hat Linux 7.1 through RH9, fully configured (krb5, SSL, etc): # "make redhat71", "make redhat72", "make redhat73", "make redhat80" # "make redhat9" # NOTE: You must use this target for Red Hat 7.1 since it # also includes a workaround for its broken curses library. # WARNING: These targets create binaries that include code for # strong encryption and are therefore not exportable. DO NOT PUT # THESE BINARIES ON US OR CANADIAN WEB OR FTP SITES. # ? for Linux on PowerMac (Mklinux DR3), "make mklinux". # ? for Linux 1.2 and later, to build with egcs, "make linuxegcs". # ? for Linux with lcc compiler, no TCP/IP, "make linuxnotcp-lcc" # ? for Linux 1.0 or earlier, "make linux10". # (End old linux targets) # ? for Mach 2.6 on (anything, e.g. DECstation), "make bsd42" or "make bsd43". # ? for MachTen (Tenon) 2.1.1.D on (e.g.) Apple Powerbook, "make machten". # ? for Masscomp RTU AT&T System III, "make rtu" # for other Masscomp, see Concurrent. # ? for Microport SV/AT (System V R2), "make mpsysv" (last edit tested: 144) # ? for Microport SVR4 2.2, 3.1, or 4.1 "make sys5r4sx" # ? for Microsoft,IBM Xenix (/286, PC/AT, etc), "make xenix" or "make sco286" # ? for MIPS System with RISC/os (UMIPS) 4.52 = AT&T SVR3, "make mips" # or "make mipstcpc" # ? for MkLinux on Power Macintosh, "make mklinux" # ? for Modcomp 9730, Real/IX, "make sys5r3" (or modify to use gcc = GLS cc) # ? for Modcomp Realstar 1000 with REAL/IX D.1, "make sv88r32" # ? for Motorola Four Phase, "make sys3" or "make sys3nid" # ? for Motorola Delta System V/68 R3, "make sv68r3" # ? for Motorola Delta System V/68 R3V5, "make sv68r3v5" # ? for Motorola Delta System V/68 R3V5.1, "make sv68r3v51" # ? for Motorola Delta System V/68 R3V6 with NSE TCP/IP, "make sv68r3v6" # ? for Motorola Delta System V/88 R32, "make sv88r32" # ? for Motorola Delta System V/88 R40, "make sv88r40" # ? for Mt Xinu Mach386 on 386/486-based PCs, "make bsd43" # ? for NCR Tower 1632, OS 1.02, "make tower1" # ? for NCR Tower 1632 or Minitower with System V R2, "make sys3" # or "make sys3nv" # ? for NCR Tower 32, OS Release 1.xx.xx, "make tower32-1" # ? for NCR Tower 32, OS Release 2.xx.xx, "make tower32-2" # ? for NCR Tower 32, OS Releases based on Sys V R3, "make tower32" # ? for NCR Tower 32, OS Releases based on Sys V R3 with gcc "make tower32g" # ? for NCR System 3000, AT&T UNIX System V R4 2.0, "make sys5r4sxna" # ? for NCR System 3000, AT&T UNIX System V R4 2.0 with Wollongong TCP/IP, # "make sys5r4net2" or "make sys5r4net2c". # Some header files might be misplaced; try this: # ln /usr/include/netinet/in.h /usr/include/sys/in.h # ln /usr/include/arpa/inet.h /usr/include/sys/inet.h # ln /usr/include/sys/termiox.h /usr/include/termiox.h # ? for NCR System 3000, NCR UNIX 02.02.01, same as above. # ? for NCR MP-RAS System V R4 V2.03 or 3.02, "make mpras" or "make mprastcpc" # + for NetBSD any version on any architecture, "make netbsd" # + for NetBSD with OpenSSL, "make netbsd+ssl" # ? for NetBSD with ncurses specified instead of curses, "make netbsdn" # ? for NetBSD with all curses support omitted, "make netbsdnc" # ? for NeXT with NeXTSTEP 1.0 through 3.2, "make next" (on a NeXT) # ? for NeXT with NeXTSTEP 3.3, "make next33" # ? for NeXT with OPENSTEP/Mach 4.1, "make nextquadfat". # ? for NeXT with OPENSTEP/Mach 4.2, "make openstep42". # ? for NeXTSTEP/486, "make next" (on a PC) # ? for NeXTSTEP portable binary (runs on Intel or Motorola), "make nextfat" # ? for NeXTSTEP portable binary (Intel, Motorola, HP PA-RISC, or SPARC), # "make nextquadfat" # ? for Nixdorf Targon/31, "make t31tos40x" # ? for Norsk Data Uniline 88/17 with SV/88 R3.2, "make sv88r32" # for Novell UnixWare - see UnixWare # ? for OSF/1 (vanilla, from OS/F), "make posix" # ? for OkiStation 7300 Series, "make sys5r4sxtcp" # ? for Olivetti LSX-3020 with X/OS R.2.3, "make xos23" or "make xos23c" # + for OpenBSD, "make openbsd" (also see secure targets listed below). # ? for OPENSTEP/Mach 4.1, "make nextquadfat" (NeXT, Intel, PA-RISC, SPARC) # ? for OPENSTEP/Mach 4.2, "make openstep42" (tested on NeXT) # ? for Perkin-Elmer (Concurrent) 3200 series, "make sys5". # ? for Perkin-Elmer (Concurrent) 3200 series with , "make ccop1" # ? for Perkin-Elmer/Concurrent 3200 with Xelos R02, "make ccop1" # ? for PFU Compact A Series SX/A TISP V10/E50 (Japan), "make sxae50" # ? for Plexus, "make sys3" # ? for Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1, # "ucb make pyramid" or for HDB UUCP, "ucb make pyramid-hdb" or: # ? for Pyramid MIServer S or ES Series, DataCenter/OSx, "make pyrdcosx" # ? for Pyramid MIS-S MIPS R3000, DataCenter OSx System V R4, "make pyrdcosx" # ? for POSIX on anything, "make posix" (but adjustments might be necessary). # NOTE: this target is not very useful - many features are missing. # ? for Prime 8000 MIPS, SVR3, "make mips" or "make mipstcpc" # - for QNX 2.x (sorry we don't have a version of C-Kermit for QNX 2.x) # ? for QNX 4.0 or 4.1, 16-bit, on 286 PC, Watcom C 8.5, "make qnx16_41" # ? for QNX 4.21 - 4.22A (286+), and 4.23 (386+), or higher, 16-bit, # Watcom C 9.5x or higher, "make qnx16" # + for QNX 4.21-4.25, 32-bit, 386 or above, Watcom C 10.6, "make qnx32" # NOTE: ("make qnx" == "make qnx32") # ? for QNX Neutrino 2+, "make qnx_nto2+" (crosscompiled on QNX4 with Watcom C) # ? for QNX 6 = Neutrino 2.xx, "make qnx6" # ? for Ridge 32 (ROS3.2), "make ridge32" # ? for Samsung MagicStation, "make sys5r4" # ? for SCO Xenix 2.2.1 with development system 2.2 on 8086/8 "make sco86" # ? for SCO Xenix/286 2.2.1 with development system 2.2 on 80286, "make sco286" # NOTE: reportedly this makefile is too long for SCO Xenix/286 make, but it # works with "makeL", or if some of the other make entries are edited out. # ? for SCO Xenix/386 2.2.2, "make sco386" # ? for SCO Xenix/386 2.3.x, "make sco3r2" # ? for SCO Xenix/386 SCO 2.3.3 or 2.3.4 with gcc 1.37 or later, # "make sco386gcc" or (to add curses) "make sco386gccc". # ? for SCO Xenix/386 or UNIX/386 with Excelan TCP/IP, "make sco3r2net" # or (to add curses support) "make sco3r2netc" or "sco386netc" # + for SCO XENIX 2.3.4, "make sco234" or "make sco234c" to add curses. # ? for SCO XENIX 2.3.4 with SCO TCP/IP & curses, "make sco234netc". # ? for SCO Xenix 2.3.x with Racal-InterLan TCP/IP, "make sco3r2netri" # for other UNIX varieties with Racal Interlan TCP/IP, read sco3r2netri entry # ? for SCO Xenix 2.3.x with SCO (Lachman) TCP/IP, "make sco3r2lai" # or (to add curses) "make sco3r2laic" # for SCO UNIX... ALSO READ COMMENTS in the SCO UNIX entries for more info! # ? for SCO UNIX/386 3.2.0 or 3.2.1, "make sco3r2" or "make sco3r2x" # ? for SCO UNIX/386 3.2.2, "make sco3r22" or "make sco3r22gcc" # or "make sco3r22c" # ? for SCO UNIX/386 3.2.2 with SCO TCP/IP, "make sco3r22net" # or "make sco3r22netc" (curses) # ? for SCO ODT 1.1, "make sco3r22net" or "make sco3r22netc" (curses) # ? for SCO UNIX/386 3.2 V4.x, no network support, "make sco32v4" # ? or "make sco32v4ns" (this one uses no select() or sockets library) # ? for SCO UNIX/386 3.2 V4.x with TCP/IP, "make sco32v4net" # (also sco32v4gcc, sco32v4netgcc) # ? for SCO UNIX/386 3.2 V5.0 - see SCO OpenServer. # ? for SCO UNIX 3.2v4.x with TCP/IP, for Extended Acer File # System (EAFS), curses, ANSI C compilation, "make sco32v4net" # ? or (to use select()-based CONNECT module) "make sco32v4netx". # ? for SCO UNIX 3.2v4.2, "make sco-odt30" (includes TCP/IP). # ? for SCO MPX 3.0 - The SCO UNIX binary runs on the corresponding MPX system. # # NOTE: Also see below for other entries that are variations on these. # Also be sure to read the comments accompanying each SCO entry. # Also see Unixware section. # # ? for SCO ODT 2.0, "make sco32v4net" # ? for SCO ODT 3.0, "make sco-odt30" # ? for SCO OpenServer 5.0 (OSR5), "make sco32v500" # ? for SCO OpenServer 5.0 (OSR5) with networking, "make sco32v500net" # ? for SCO OpenServer 5.0 (OSR5), gcc, "make sco32v500gcc" # ? for SCO OpenServer 5.0 (OSR5), gcc, with networking, "make sco32v500netgcc" # ? for SCO OpenServer 5.0 (OSR5), as above, ELF, "make sco32v500netgccelf" # ? for SCO OpenServer 5.0.2, use "make sco32v502xxx" entries as above. # ? for SCO OpenServer 5.0.4, use "make sco32v504xxx" entries as above. # ? for SCO OpenServer 5.0.5, use "make sco32v505xxx" entries as above. # Use the sco32v505udkxxx entries if you have the UDK rather than /bin/cc. # ? for SCO OpenServer 5.0.6, use "make sco32v506xxx" entries as above. # ? for SCO OpenServer 5.0.6a,use "make sco32v506axxx" entries as above. # ? for SCO OpenServer 5.0.7, use "make sco32v507", "make sco32v507net" # ? for SCO (Univel) UnixWare 1.x, "make unixware" or "make unixwarenetc". # If there are problems with this in C-K 7+ see notes at unixware entry. # + for SCO OpenServer 6.0.0, "make sco_osr600" # ? for SCO UnixWare 2.0.x, "make uw20" # ? for SCO UnixWare 2.1.0, "make uw21" # ? for SCO UnixWare 2.1.3, "make uw213" # + for SCO UnixWare 7, "make uw7" (includes large file support) # ? for SCO UnixWare 7 with IKSD support, "make uw7iksd" or "make uw7iksdudk" # ? for SCO UnixWare 7 with OpenSSL, "make uw7ssl" # ? for SCO (Caldera) Open UNIX 8, "make ou8" # ? for Sharp Zaurus SL5500 PDA, "make zsl5500". # ? for Sequent with DYNIX/ptx 1.2.1, "make dynixptx12" # ? for Sequent with DYNIX/ptx 1.3 or 1.4 with TCP/IP, "make dynixptx13" # ? for Sequent with DYNIX/ptx 2.0 or 2.1 with TCP/IP, "make dynixptx20" # or "dynixptx20c" # ? for Sequent with DYNIX/ptx 2.1.6 on i486, "dynixptx216c" # ? for Sequent with DYNIX/ptx V4.1.3 with TCP/IP, "make dynixptx41c" # ? for Sequent with DYNIX/ptx V4.4.2 with TCP/IP, "make dynixptx44" # ? for Sequent Balance 8000 or B8 with DYNIX 3.0.xx, "make dynix3" # or "make dynix3noacu" # ? for Sequent Symmetry S81 with DYNIX 3.0.xx, "make dynix3" # ? for Sequent DYNIX 3.1.xx, "make dynix31" or "make dynix31c" # ? for Siemens/Nixdorf SINIX-L Intel V5.41, "make sinix541i" # + for Siemens/Nixdorf SINIX-N MIPS V5.42, "make sinix542" # ? for Siemens/Nixdorf SINIX-P MIPS V5.42 with gcc, "make sinix542g" # ? for Siemens/Nixdorf SINIX-Z Intel V5.42, "make sinix542i" # ? for Siemens/Nixdorf Reliant UNIX V5.43, "make sni543" # ? for Siemens/Nixdorf Reliant UNIX V5.44, "make sni544" # ? for Silicon Graphics Iris System V IRIX 3.2 or earlier, "make iris" # ? for Silicon Graphics Sys V R3 with IRIX 3.3 or later, "make sys5r3" # ? for Silicon Graphics Iris Indigo with IRIX 4.0 or 5.0, "make irix40" or # (to include Yellow Pages and Curses) "make irix40ypc" # ? for Silicon Graphics Iris Indigo or Elan with IRIX 4.0.x with microcode # optimization and -O4, "make irix40u" or "irix40uc" (and read notes # accompanying these entries). # ? for Silicon Graphics IRIX 5.1, "make irix51" or "irix51x" (no optimize) # ? for Silicon Graphics IRIX 5.2, "make irix52" # ? for Silicon Graphics IRIX 5.3, "make irix53" or "irix53x" (no optimize) # ? for Silicon Graphics IRIX 6.0, "make irix60". # ? for Silicon Graphics IRIX 6.2, "make irix62". # ? for Silicon Graphics IRIX 6.3, "make irix63". # ? for Silicon Graphics IRIX 6.4, "make irix64" or "make irix64gcc". # + for Silicon Graphics (SGI) IRIX 6.5, "make irix65" # + or "make irix65mips2" to force MIPS2, or "make irix65gcc" for GCC. # + for Silicon Graphics (SGI) IRIX 6.5, "make irix65" or "make irix65mips2" # ? for SGI IRIX 6.5 with SSL/TLS, SRP, and ZLIB "make irix65+ssl+srp+zlib" # ? for Solaris 2.0-2.3 on SPARC or Intel, SunPro CC, "make solaris2x", # ? or to add SunLink X.25 8.0x support, "make solaris2x25". # ? for Solaris 2.4 built with gcc, "make solaris24g". # ? for Solaris 2.0-2.3 on SPARC or Intel, GNU CC, "make solaris2xg". # ? for Solaris 2.4 with X.25, "make solaris24x25". # ? for Solaris 2.5 on SPARC or Intel, SunPro CC, "make solaris25". # ? or to add SunLink X.25 8.0x support, "make solaris25x25". # ? for Solaris 2.5 on SPARC or Intel, GNU CC, "make solaris25g". # ? for Solaris 2.6 on SPARC or Intel, "make solaris26". # ? for Solaris 7 on SPARC or Intel, SunPro CC, "make solaris7". # ? for Solaris 7 on SPARC or Intel, GNU CC, "make solaris7g". # ? for Solaris 8 on SPARC or Intel, SunPro CC, "make solaris8". # ? for Solaris 8 on SPARC or Intel, GNU CC, "make solaris8g". # + for Solaris 9 on SPARC (or Intel?), 32-bit, SunPro CC, "make solaris9". # + for Solaris 9 on SPARC (or Intel?), 32-bit, GNU CC, "make solaris9g". # ? for Solaris 9 on SPARC (or Intel?), 64-bit, GNU CC, "make solaris9g64". # + for Solaris 10 on SPARC (or Intel?), 32-bit, SunPro CC, "make solaris10". # + for Solaris 10 on SPARC 64-bit, SunPro CC, "make solaris10_64". # + for Solaris 10 on SPARC (or Intel?), 32-bit, GNU CC, "make solaris10g". # ? for Solaris 10 on SPARC (or Intel?), 64-bit, GNU CC, "make solaris10g64". # ? for Solbourne 4/500 with OS/MP 4 "make sunos4" # ? for Solbourne 4/500 with OS/MP 4.1 "make sunos41" or "make sunos41c" # ? for SONY NEWS with NEWS-OS 4.0.1C, "make sonynews" # ? for SONY NEWS with NEWS-OS 4.1.2C, "make sonynews" # ? for Sperry/UNISYS 5000/20, UTS V 5.2 3R1, "make sys5" # ? for Sperry/UNISYS 5000/30/35/50/55, UTS V 5.2 2.01, "make unisys5r2" # ? for Sperry/UNISYS 5000/80 with System V R3, "make sys5r3" # ? for Sperry/UNISYS 5000/95 with System V R3, "make sys5r3" # For UNISYS SVR3 it might be necessary to "make sys5r3 KFLAGS=-UDYNAMIC" # ? for Stardent 1520, "make sys5r3" # ? for Stratus FTX 2.x, try "make ftx" or else "make sys5r4" or "sys5r4sx" # ? for Stratus FTX 3.x, PA-RISC 1.0 or 2.0, "make ftx" or "make ftxtcp" # ? for Sun with Sun UNIX 3.5 and gcc, "make sunos3gcc" # ? for Sun with pre-4.0 SunOS versions, "make bsd" (or appropriate variant) # ? for Sun with SunOS 4.0, BSD environment, "make sunos4" # ? for Sun with SunOS 4.0, BSD, with SunLink X.25, make sunos4x25 # ? for Sun with SunOS 4.1 or 4.1.1, BSD environment, "make sunos41" # or "make sunos41c" (curses) or "make sunos41gcc" (compile with gcc) # ? for Sun with SunOS 4.1.x, BSD, with SunLink X.25 7.00 or earlier, # "make sunos41x25" or "make sunos41x25c" (curses) # ? for Sun with SunOS 4.1, 4.1.1, AT&T Sys V R3 environment, "make sunos41s5" # ? for Sun with SunOS 4.1.2, "make sunos41" or any of its variations. # NOTE: All SunOS 4.x systems -- Shared libraries are used by default. # If this causes problems, add -Bstatic to CFLAGS. # NOTE2: When building C-Kermit under SunOS for the BSD universe, # but /usr/5bin/cc is ahead of /usr/ucb/cc in your PATH, add # "CC=/usr/ucb/cc CC2=/usr/ucb/cc" to the make entry. # NOTE3: If an executable built on one type of Sun hardware does not work # on another type, rebuild the program from source on the target machine. # for Sun with Solaris 1.x use SunOS 4.1 entries. # for Sun with Solaris 2.0 and higher use Solaris entries. # + for Sun SPARC with Linux, "make linux" # ? for Sun SPARC with OPENSTEP/Mach 4.1, "make nextquadfat" # ? for Sun SPARC with OPENSTEP/Mach 4.2, "make openstep42" # - for Tandy 16/6000 with Xenix 3.0, "make trs16" (C-Kermit 7.0 is too big) # ? for Tektronix 6130/4132/43xx (e.g.4301) with UTek OS, "make utek" # or (for models without hardware flow control), "make uteknohwfc" # ? for Tektronix XD88 series with UTekV OS, "make utekvr3" # ? for Tri Star Flash Cache with Esix SVR3.2, "make sys5r3" # NOTE: The Tru64 builds have been failing since 2010, but "make dec-osf" is OK # ? for Tru64 UNIX 4.0E, "make tru64-40e" # ? for Tru64 UNIX 4.0F, "make tru64-40f" # ? for Tru64 UNIX 4.0G, "make tru64-40g" # ? for Tru64 UNIX 5.0A, "make tru64-50a" # ? for Tru64 UNIX 5.1A, "make tru64-51a" # ? for Tru64 UNIX 5.1B, "make tru64-51b" # ? for Unistar, "make sys5" # ? for Unisys S/4040 68040 CTIX SVR3.2 6.4.1, "make ctix" or "make sys5r3" # ? for Unisys U5000 UNIX SVR3 6.x, "make sys5r3" or "make sys5r3c" # ? for Unisys U6000 UNIX SVR4 1.x, "make sys5r4nx" or "make sys5r4nxnetc" # for Unisys ... (also see Sperry) # for Univel - see UnixWare # for Unixware - see SCO # ? for Valid Scaldstar, "make valid" # ? for Whitechapel MG01 Genix 1.3, "make white" # ? for Zilog ZEUS 3.21, "make zilog" # # The result should be a runnable program called "wermit" in the current # directory. After satisfactory testing, you can rename wermit to "kermit" # and put it in some directory that's in everybody's PATH, such as # /usr/local or /opt/local. # # To remove intermediate and object files, "make clean". # If your C compiler produces files with an extension other than "o", # then "make clean EXT=u", "make clean EXT=s", or whatever. # # To run lint on the source files, "make lintsun", "make lintbsd", # "make lints5", as appropriate. # # ****************************** # SECURE TARGETS # # Beginning with C-Kermit 7.0, secure targets are included, as are the # source modules (ckuat*.[ch], ck_*.[ch]) needed to build them. Secure # target names are like the regular names, but with security features # indicated by plus (+) signs. The features are: # # krb4 MIT Kerberos IV # krb5 MIT Kerberos V # openssl OpenSSL (SSL/TLS) # zlib ZLIB compression for SSL/TLS # srp Stanford Secure Remote Password # pam PAM (pluggable authentication module) # shadow Shadow Password File # # You can build these targets if you have the Kermit source files and the # required libraries (Kerberos, OpenSSL, SRP, etc) and header files. See: # http://www.columbia.edu/kermit/security.html # for specific details regarding supported versions. # # NOTE: OpenSSL 0.9.6 and earlier are not compatible with 0.9.7 and later. # C-Kermit code was originally designed for 0.9.6. To build with 0.9.7 you # must add -DOPENSSL_097 to avoid missing symbols in the DES library and to # use the entry points that were renamed to avoid conflict with Kerberos 4. # If you have OpenSSL 0.9.8, add -DOPENSSL_098, which is a synonym for # -DOPENSSL_097. If you have 1.0.0 or later, add -DOPENSSL_100, which is # another synonym. # In OpenSSL builds add -ldl if you get unresolved references for # dlopen, dlclose, dlsym, and/or dlerror. # # In order to build a secure version of Kermit, you need to know the location # of the header (include) files and libraries for the desired form of # security. Unless you specify a location, this makefile looks in /usr/local # and if the required files are not found, the build fails. # # If the secure headers and libraries are not on your computer, you have # to download and install them, for example from http://www.openssl.org . # # The following symbols are used to specify library and header file locations: # prefix = /usr/local srproot = $(prefix) sslroot = $(prefix) manroot = $(prefix) K4LIB=-L/usr/kerberos/lib K4INC=-I/usr/kerberos/include K5LIB=-L/usr/kerberos/lib K5INC=-I/usr/kerberos/include SRPLIB=-L$(srproot)/lib SRPINC=-I$(srproot)/include SSLLIB=-L$(sslroot)/ssl/lib SSLINC=-I$(sslroot)/ssl/include # To override these assignments; for example, if your OpenSSL files are # not in /usr/local/ssl, invoke the desired target like this: # # make solaris9+openssl "SSLINC=-I/opt/openssl-0.9.8k/include" \ # "SSLLIB=-L/opt/openssl-0.9.8k/lib" # # (don't set the variables and then do "make -e" because that breaks # chaining of makefile targets.) # # Here are some up-to-date secure targets as of Sep 2009: # # aix+openssl: IBM AIX 4.2 or later with OpenSSL # freebsd44+srp+openssl FreeBSD 4.4 with SRP and OpenSSL # freebsd50+openssl FreeBSD 5.0 with OpenSSL # hpux1100o+openssl: HP-UX 11.xx with OpenSSL # hpux1000gcc+openssl: HP-UX 10.xx with OpenSSL (build with gcc) # hpux1100gcc+openssl: HP-UX 11.xx with OpenSSL (build with gcc) # irix6x+krb5: IRIX 6.x with Kerberos V # irix65+krb5: etc etc... # solaris9+openssl Solaris 9,10, or 11 with Openssl (Sun cc) # solaris9g+openssl Solaris 9,10, or 11 with Openssl (gcc) # linux+ssl OpenSSL only # linux+krb5+ssl Linux with Kerberos 5 and OpenSSL # linux+krb5: Kerberos 5 only # # The following secure Linux targets have not been updated or tested recently. # linux+krb5+krb4: # linux+srp: # linux+srp+pam: # linux+srp+gmp: # linux+srp+gmp+no-des: # linux+srp+gmp-export: # linux+srp+gmp+pam: # linux+shadow+pam: # linux+openssl: # linux+openssl+shadow: # linux+openssl+zlib+shadow+pam: # linux+srp+openssl: # linux+krb5+krb4+srp: # linux+krb5+krb4+srp+openssl: # linux+krb5+krb4+openssl: # linux+krb5+krb4+openssl+shadow: # linux+krb5+krb4+openssl+zlib+shadow: # linux+krb5+krb4+srp-export: # linux+krb5+krb4+srp+pam: # linux+krb5+krb4+srp+openssl+pam-debug: # linux+krb5+krb4+srp+openssl+pam: # linux+krb5+krb4+srp+openssl+zlib+pam: # linux+krb5+krb4+openssl+shadow+pam: # linux+krb5+openssl+zlib+shadow+pam: # # The following have not been tested recently either and might # need adjustment. # # macosx+krb5+ssl: Mac OS X 10.3.9 or later + OpenSSL and Kerberos 5 # macosx103+secure: This one is probably redundant # netbsd+openssl: NetBSD with OpenSSL # openbsd30+ssl: OpenBSD 3.0 with OpenSSL # redhat71,redhat72,redhat73,redhat80,redhat9 (Krb5,OpenSSL,Showdow,PAM,Zlib) # sco32v500net+ssl: # sco32v505net+ssl: # solaris2x+krb4: # solaris2xg+krb4: # solaris2xg+openssl+pam+shadow: # solaris2xg+openssl+zlib+pam+shadow: # solaris2xg+krb5+krb4+openssl+shadow: # solaris25+krb4: # solaris25g+krb4: # solaris26g+openssl: # solaris8g+openssl+zlib+pam+shadow: # solaris8g+krb4: # solaris9g+openssl+zlib+pam+shadow: # solaris9g+openssl+shadow+pam+zlib # sunos41gcc+krb4: SunOS 4.1 built with gcc with Kerberos IV # sunos41gcc+openssl: SunOS 4.1 built with gcc with OpenSSL # sunos41gcc+krb4+openssl: ...with Kerberos IV and OpenSSL # sunos41gcc+krb4+openssl+zlib: ditto, plus ZLIB compression # sunos41gcc+krb4+srp+openssl+zlib: ditto, plus SRP # sunos41gcc+srp+openssl+zlib: # tru64-51b-openssl: Tru64 (Digital) Unix 5.1B with OpenSSL # uw7ssl Unixware 7 with SSL # ########################################################################### # # Compile and Link variables: # # EXT is the extension (file type) for object files, normally o. # See MINIX entry for what to do if another filetype must be used. # EXT=o #LNKFLAGS= SHAREDLIB= CC= cc CC2= cc MAKE= make SHELL=/bin/sh ########################################################################### # (Ancient) UNIX V7-specific variables. # These are set up for Perkin-Elmer 3230 V7 Unix: # PROC=proc DIRECT= NPROC=nproc NPTYPE=int BOOTFILE=/edition7 # # ( For old Tandy TRS-80 Model 16A or 6000 V7-based Xenix, use PROC=_proc, # DIRECT=-DDIRECT, NPROC=_Nproc, NPTYPE=short, BOOTFILE=/xenix ) # ########################################################################### # SAMPLE INSTALLATION SCRIPT # # Modify to suit your own computer's file organization and permissions. If # you don't have write access to the destination directories, "make install" # fails. In most cases, a real installation also requires you to chown / # chgrp the Kermit binary for the UUCP lockfile and/or tty devices, and # perhaps also to chmod +s the corresponding permission fields. # # Default binary, man, and doc directories are supplied below. You can # override them in your 'make' command. Examples: # # make install # Accept defaults. # make "INFODIR=/usr/share/lib/kermit" install # Override INFODIR default. # # You can also build and install in one step, e.g.: # # make linux install # # If you use the 'install' target to install C-Kermit, it creates an # UNINSTALL script that can be used to uninstall it. # WERMIT = makewhat BINARY = wermit DESTDIR = BINDIR = $(prefix)/bin MANDIR = $(manroot)/man/man1 MANEXT = 1 SRCDIR = INFODIR = CERTDIR = TEXTFILES = COPYING.TXT ckcbwr.txt ckubwr.txt ckuins.txt ckccfg.txt \ ckcplm.txt ckermit.ini ckermod.ini ckermit70.txt ckermit80.txt ALL = $(WERMIT) all: $(ALL) .c.o: $(CC) $(CFLAGS) -DKTARGET=\"$(KTARGET)\" -c $< #Clean up intermediate and object files clean: @echo 'Removing object files...' -rm -f ckcmai.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckcpro.$(EXT) ckcfns.$(EXT) \ ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) \ ckufio.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) ckwart.$(EXT) ckuusx.$(EXT) \ ckuusy.$(EXT) ckcnet.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckusig.$(EXT) \ ckucns.$(EXT) ckcmdb.$(EXT) ckuath.$(EXT) ckctel.$(EXT) ckclib.$(EXT) \ ckcuni.$(EXT) ck_crp.$(EXT) ck_ssl.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \ ckcpro.c wart show: @echo prefix=$(prefix) @echo srproot=$(srproot) @echo sslroot=$(sslroot) @echo manroot=$(manroot) @echo K4LIB=$(K4LIB) @echo K4INC=$(K4INC) @echo K5LIB=$(K5LIB) @echo K5INC=$(K5INC) @echo SRPLIB=$(SRPLIB) @echo SRPINC=$(SRPINC) @echo SSLLIB=$(SSLLIB) @echo SSLINC=$(SSLINC) @exit # Install C-Kermit after building -- IMPORTANT: Read the instructions above # (SAMPLE INSTALLATION SCRIPT). For SSL/TLS versions, ca_certs.pem file # should be installed in the appropriate place for your OpenSSL library, e.g.: # # cp ca_certs.pem /usr/local/ssl/ # cp ca_certs.pem /usr/share/ssl/ # # To make sure 'man' notices the new source file and doesn't keep # showing the old formatted version, remove the old formatted version, # something like this: # rm -f $(MANDIR)/../cat$(MANEXT)/kermit.$(MANEXT) # or this (which requires CATDIR to be defined): # rm -f $(CATDIR)/kermit.$(MANEXT) # # As of C-Kermit 8.0.205 this target also builds an UNINSTALL script, and # so it might be too long for some old Bourne shells, in which case you can # use a different shell: # # make SHELL=ksh install # make SHELL=/bin/posix/sh install # install: @echo Installing C-Kermit version $(CKVER)...;\ rm -f UNINSTALL;\ exec 3>./UNINSTALL;\ echo "# C-Kermit UNINSTALL script" >&3;\ echo "# `date`\n" >&3;\ echo "CKVER=$(CKVER)" >&3;\ echo "PrN Uninstalling C-Kermit version $(CKVER)..." >&3;\ echo DESTDIR=$(DESTDIR);\ if test -n "$(DESTDIR)"; then\ if test -d $(DESTDIR); then\ echo "$(DESTDIR) exists...\n";\ else\ echo "Creating $(DESTDIR)...";\ DESTDIR=`echo $(DESTDIR) | sed 's!/*$$!!'`;\ mkdir $$DESTDIR || exit 1;\ fi;\ chmod 755 $(DESTDIR) || exit 1;\ fi;\ echo BINARY=$(BINARY);\ if test -f $(BINARY); then\ ls -l $(BINARY);\ else\ echo "?$(BINARY) not found";\ exit 1;\ fi;\ if test -z "$(DESTDIR)$(BINDIR)"; then\ echo "Binary directory not specified";\ exit 1;\ fi;\ if test -d $(DESTDIR)$(BINDIR); then\ echo "$(DESTDIR)$(BINDIR) exists...";\ else\ echo "Creating $(DESTDIR)$(BINDIR)/...";\ mkdir $(DESTDIR)$(BINDIR) || exit 1;\ chmod 755 $(DESTDIR)$(BINDIR);\ fi;\ rm -f $(DESTDIR)$(BINDIR)/kermit;\ cp $(BINARY) $(DESTDIR)$(BINDIR)/kermit || exit 1;\ chmod 755 $(DESTDIR)$(BINDIR)/kermit || exit 1;\ rm -f $(DESTDIR)$(BINDIR)/kermit-sshsub;\ ln -s $(DESTDIR)$(BINDIR)/kermit\ $(DESTDIR)$(BINDIR)/kermit-sshsub || exit 1;\ echo 'set flag=f\nPrC Removing binaries' >&3;\ echo "RmF $(DESTDIR)$(BINDIR)/kermit-sshsub" >&3;\ echo "RmF $(DESTDIR)$(BINDIR)/kermit" >&3;\ if test -f ckermit.ini; then\ echo "#!$(BINDIR)/kermit" >\ $(DESTDIR)$(BINDIR)/_tmp.ini;\ cat ckermit.ini >> $(DESTDIR)$(BINDIR)/_tmp.ini;\ mv $(DESTDIR)$(BINDIR)/_tmp.ini\ $(DESTDIR)$(BINDIR)/ckermit.ini;\ chmod 755 $(DESTDIR)$(BINDIR)/ckermit.ini;\ echo "RmF $(DESTDIR)$(BINDIR)/ckermit.ini" >&3;\ fi;\ echo;\ echo 'EfM' >&3;\ echo "Kermit binary installed:";\ ls -l $(DESTDIR)$(BINDIR)/kermit\ $(DESTDIR)$(BINDIR)/kermit-sshsub\ $(DESTDIR)$(BINDIR)/ckermit.ini;\ echo;\ echo " WARNING: If C-Kermit is to be used for dialing out,";\ echo " you must change its owner and group and permissions";\ echo " to match the 'cu' program. See the ckuins.txt file";\ echo " for details.";\ echo;\ echo MANDIR=$(MANDIR);\ if test -n "$(DESTDIR)$(MANDIR)"; then\ if test -d $(DESTDIR)$(MANDIR); then\ echo "$(DESTDIR)$(MANDIR) exists...";\ else\ echo "Creating $(MANDIR)...";\ mkdir $(MANDIR) || exit 1;\ chmod 755 $(MANDIR) || exit 1;\ fi;\ rm -f $(DESTDIR)$(MANDIR)/kermit.$(MANEXT);\ cp ckuker.nr $(DESTDIR)$(MANDIR)/kermit.$(MANEXT) || exit 1;\ chmod 644 $(DESTDIR)$(MANDIR)/kermit.$(MANEXT) || exit 1;\ echo 'set flag=f\nPrC Removing man pages' >&3;\ echo "RmF $(DESTDIR)$(MANDIR)/kermit.$(MANEXT)" >&3;\ echo 'EfM' >&3;\ echo;\ else\ echo "Not installing man page!\n";\ fi;\ echo CERTDIR=$(CERTDIR);\ if test -n "$(CERTDIR)"; then\ if test -f ca_certs.pem; then\ if test -d $(CERTDIR); then\ echo "$(CERTDIR) exists...";\ else\ echo "Creating $(CERTDIR)...";\ mkdir $(CERTDIR) || exit 1;\ chmod 755 $(CERTDIR) || exit 1;\ fi;\ echo "Installing certificates file...";\ cp ca_certs.pem $(CERTDIR) || exit 1;\ echo 'set flag=f' >&3;\ echo 'PrC Removing certificates file' >&3;\ echo "RmF $(CERTDIR)/ca_certs.pem" >&3;\ echo 'EfM' >&3;\ echo;\ fi;\ else\ echo "Not installing certificates file!\n";\ fi;\ echo SRCDIR=$(DESTDIR)$(SRCDIR);\ if test -n "$(SRCDIR)"; then\ echo "Installing source files...";\ if test -d $(DESTDIR)$(SRCDIR); then\ echo "$(DESTDIR)$(SRCDIR) exists...";\ else\ echo "Creating $(DESTDIR)$(SRCDIR)/...";\ mkdir $(DESTDIR)$(SRCDIR) || exit 1;\ chmod 755 $(DESTDIR)$(SRCDIR);\ fi;\ echo "Copying source files to $(DESTDIR)$(SRCDIR)...";\ echo 'set flag=f\nPrC Removing source files' >&3;\ for TextFile in COPYING.TXT ck[cuw_]*.[cwh] makefile; do\ cp $$TextFile $(DESTDIR)$(SRCDIR)/ && echo ".\c";\ echo "RmF $(DESTDIR)$(SRCDIR)/$$TextFile" >&3;\ done; echo;\ echo 'EfM' >&3;\ ( cd $(DESTDIR)$(SRCDIR)/ &&\ ls -l COPYING.TXT ck[cuw_]*.[cwh] makefile );echo;\ else\ echo "Not installing source code!\n";\ fi;\ echo INFODIR=$(DESTDIR)$(INFODIR);\ if test -n "$(INFODIR)"; then\ echo "Installing info files...";\ if test -d $(DESTDIR)$(INFODIR); then\ echo "$(DESTDIR)$(INFODIR) exists...";\ else\ echo "Creating $(DESTDIR)$(INFODIR)/...";\ mkdir $(DESTDIR)$(INFODIR) || exit 1;\ chmod 755 $(DESTDIR)$(INFODIR);\ fi;\ echo "Copying text files to $(DESTDIR)$(INFODIR)...";\ echo 'set flag=f\nPrC Removing text files' >&3;\ FileCopyList='';\ for TextFile in $(TEXTFILES); do\ test -f $$TextFile || continue;\ cp $$TextFile $(DESTDIR)$(INFODIR) && echo ".\c" &&\ FileCopyList="$$FileCopyList $$TextFile";\ echo "RmF $(DESTDIR)$(INFODIR)/$$TextFile" >&3;\ done; echo;\ echo 'EfM' >&3;\ ( cd $(DESTDIR)$(INFODIR)/ && chmod 644 $$FileCopyList );\ ( cd $(DESTDIR)$(INFODIR)/ && pwd && ls -l $$FileCopyList );\ else\ echo "Not installing text files!\n";\ fi;\ echo "set flag=d\nPrN Removing empty dirs..." >&3;\ echo "RmD $(DESTDIR)$(BINDIR)" >&3;\ echo "RmD $(DESTDIR)$(SRCDIR)" >&3;\ echo "RmD $(DESTDIR)$(INFODIR)" >&3;\ echo "RmD $(CERTDIR)" >&3;\ echo "RmD $(MANDIR)" >&3;\ echo "RmD $(DESTDIR)" >&3;\ echo "EfM" >&3;\ echo "PrN C-Kermit version $(CKVER) is uninstalled!" >&3;\ echo C-Kermit version $(CKVER) installed! # UN-Install C-Kermit after building # Please to not remove the extra blanks before and after '{}' within the # functions. You would get syntax errors for some older Bourne shells! Best is # you don't change or remove anything. # uninstall: @if test ! -f UNINSTALL; then\ echo "?C-Kermit UNINSTALL data file not found!";\ exit 1;\ fi; \ X=`grep '^CKVER='$(CKVER)'$$' ./UNINSTALL || :`;\ if test -z "$$X"; then\ echo "?UNINSTALL file is not for C-Kermit version $(CKVER)";\ exit 2;\ fi;\ PrN () { echo "$$*"; };\ PrC () { echo "$$* \c"; };\ RmF () { test -f "$$1" && rm -f "$$1" && echo ".\c" && flag=F ; };\ RmD () { \ dir=$$1;\ while test -d "$$dir"; do\ rmdir "$$dir" 2>&- || return && echo "$$dir" && flag=D;\ dir=`echo "$$dir" | sed 's!/[^/]*/*$$!!'`;\ done; \ };\ EfM () { \ case "$$flag" in\ f) echo "- Nothing to remove!";;\ d) echo "Nothing to remove!";;\ F) echo " done";;\ D) echo "done";;\ esac; \ };\ while read Act Args; do\ case $$Act in\ EfM) EfM;;\ RmD) RmD $$Args;;\ RmF) RmF $$Args;;\ PrN) PrN $$Args;;\ PrC) PrC $$Args;;\ set) eval $$Args;;\ esac;\ done < ./UNINSTALL makewhat: @echo 'make what? You must tell which platform to make C-Kermit for.' @echo Examples: make linux, make aix, make solaris10, make hpux1100. @echo Please read the comments at the beginning of the makefile. ########################################################################### # # Dependencies Section: wermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \ ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \ ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \ ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(CC2) $(LNKFLAGS) -o wermit \ ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \ ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \ ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucon.$(EXT) \ ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \ ckusig.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \ $(LIBS) # Preferred configuration with select()-based CONNECT xermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \ ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \ ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \ ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) ckuath.$(EXT) \ ck_crp.$(EXT) ck_ssl.$(EXT) $(CC2) $(LNKFLAGS) -o wermit \ ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \ ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \ ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) \ ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckusig.$(EXT) \ ckctel.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \ ckuath.$(EXT) ck_crp.$(EXT) ck_ssl.$(EXT) $(LIBS) # Malloc Debugging version mermit: ckcmdb.$(EXT) ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \ ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \ ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \ ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \ ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \ ckusig.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(CC2) $(LNKFLAGS) -o mermit ckcmdb.$(EXT) ckclib.$(EXT) ckcmai.$(EXT)\ ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \ ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \ ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \ ckuusr.$(EXT) ckucon.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \ ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckcuni.$(EXT) \ ckupty.$(EXT) ckcftp.$(EXT) $(LIBS) # Kerberized Version - Subject to USA export restrictions. # NOTE: We don't use this any more -- As of 15 Feb 2003, the "xermit" # target is used for both secure and regular version. krbmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \ ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \ ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \ ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \ ckcftp.$(EXT) ck_ssl.$(EXT) $(CC2) $(LNKFLAGS) -o krbmit ckcmai.$(EXT) ckclib.$(EXT) \ ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \ ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \ ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \ ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \ ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \ ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \ ck_ssl.$(EXT) $(LIBS) krbmit-debug: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \ ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \ ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \ ckuxla.$(EXT) ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \ ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \ ckusig.$(EXT) ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) \ ckupty.$(EXT) ck_ssl.$(EXT) ckcmdb.$(EXT) ckcftp.$(EXT) $(CC2) $(LNKFLAGS) -o krbmit ckcmdb.$(EXT) ckcmai.$(EXT) \ ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) \ ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) \ ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) \ ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) \ ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) \ ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \ ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \ ckcftp.$(EXT) ck_ssl.$(EXT) $(LIBS) # SRP(TM) Version - Subject to USA export restrictions. srpmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \ ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \ ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \ ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \ ckcftp.$(EXT) ck_ssl.$(EXT) $(CC2) $(LNKFLAGS) -o srpmit ckcmai.$(EXT) ckclib.$(EXT) \ ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \ ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \ ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \ ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \ ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \ ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ck_ssl.$(EXT) \ ckcftp.$(EXT) $(LIBS) # Kerberized Version - Not subject to USA export restrictions. krbmit-export: ckcmai.$(EXT) \ ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \ ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \ ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \ ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(CC2) $(LNKFLAGS) -o krbmit-export ckcmai.$(EXT) ckclib.$(EXT) \ ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \ ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \ ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \ ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \ ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \ ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(LIBS) # SRP(TM) Version - Not subject to USA export restrictions. srpmit-export: ckcmai.$(EXT) \ ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \ ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \ ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \ ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \ ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \ ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(CC2) $(LNKFLAGS) -o srpmit-export ckcmai.$(EXT) ckclib.$(EXT) \ ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \ ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \ ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \ ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \ ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \ ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(LIBS) ########################################################################### # man page... # ckuker.nr: @echo This target is obsolete. @echo The ckuker.nr file no longer needs any preprocessing. ########################################################################### # Dependencies for each module... # ckcmai.$(EXT): ckcmai.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcnet.h ckcsig.h \ ckuusr.h ckctel.h ckclib.h ckclib.$(EXT): ckclib.c ckclib.h ckcdeb.h ckcasc.h ckcsym.h ckcpro.$(EXT): ckcpro.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckclib.h ckcpro.c: ckcpro.w wart ckcdeb.h ckcsym.h ckcasc.h ckcker.h ckcnet.h ckctel.h \ ckclib.h ./wart ckcpro.w ckcpro.c ckcfns.$(EXT): ckcfns.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h ckcuni.h \ ckuxla.h ckclib.h ckcnet.h ckcfn2.$(EXT): ckcfn2.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \ ckuxla.h ckctel.h ckclib.h ckcnet.h ckcuni.h ckcfn3.$(EXT): ckcfn3.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \ ckuxla.h ckclib.h ckcuni.h ckuxla.$(EXT): ckuxla.c ckcker.h ckcsym.h ckcdeb.h ckcxla.h ckuxla.h ckclib.h \ ckcuni.h ckcuni.$(EXT): ckcuni.c ckcdeb.h ckcker.h ckucmd.h ckcuni.h ckcxla.h ckuxla.h ckuusr.$(EXT): ckuusr.c ckucmd.h ckcker.h ckuusr.h ckcsym.h ckcdeb.h ckcxla.h \ ckuxla.h ckcasc.h ckcnet.h ckctel.h ckclib.h ckcuni.h ckuus2.$(EXT): ckuus2.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \ ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h ckuus3.$(EXT): ckuus3.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \ ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h ckuus4.$(EXT): ckuus4.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \ ckcasc.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h ckcuni.h ckuus5.$(EXT): ckuus5.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \ ckcsym.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h ckuus6.$(EXT): ckuus6.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \ ckcsym.h ckctel.h ckclib.h ckuus7.$(EXT): ckuus7.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \ ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h ckuusx.$(EXT): ckuusx.c ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcsym.h \ ckcsig.h ckcnet.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h ckuusy.$(EXT): ckuusy.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \ ckclib.h ckucmd.$(EXT): ckucmd.c ckcasc.h ckucmd.h ckcdeb.h ckcsym.h ckctel.h ckclib.h ckufio.$(EXT): ckufio.c ckcdeb.h ckuver.h ckcsym.h ckclib.h \ ckcxla.h ckuxla.h ckcuni.h ckutio.$(EXT): ckutio.c ckcdeb.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h ckucon.$(EXT): ckucon.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \ ckclib.h ckucns.$(EXT): ckucns.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \ ckclib.h ckcxla.h ckuxla.h ckcuni.h ckcnet.$(EXT): ckcnet.c ckcdeb.h ckcker.h ckcnet.h ckcsym.h ckcsig.h ckctel.h \ ckclib.h ckctel.$(EXT): ckcsym.h ckcdeb.h ckcker.h ckcnet.h ckctel.h ckclib.h # ck_off_t: ck_off_t.$(EXT) # $(CC) -o ck_off_t ck_off_t.$(EXT) wart: ckwart.$(EXT) $(CC) $(LNKFLAGS) -o wart ckwart.$(EXT) $(LIBS) ckcmdb.$(EXT): ckcmdb.c ckcdeb.h ckcsym.h ckclib.h ckwart.$(EXT): ckwart.c ckudia.$(EXT): ckudia.c ckcker.h ckcdeb.h ckucmd.h ckcasc.h ckcsym.h ckcsig.h \ ckcnet.h ckctel.h ckclib.h ckuscr.$(EXT): ckuscr.c ckcker.h ckcdeb.h ckcasc.h ckcsym.h ckcsig.h \ ckcnet.h ckctel.h ckclib.h ckusig.$(EXT): ckusig.c ckcasc.h ckcdeb.h ckcker.h ckcnet.h ckuusr.h \ ckcsig.h ckctel.h ckclib.h ckcftp.$(EXT): ckcftp.c ckcdeb.h ckcasc.h ckcker.h ckucmd.h ckuusr.h \ ckcnet.h ckctel.h ckcxla.h ckuxla.h ckcuni.h ckupty.$(EXT): ckupty.c ckupty.h ckcdeb.h ckuath.$(EXT): ckuath.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \ ckclib.h ckcnet.h ck_crp.$(EXT): ck_crp.c ckcdeb.h ckcnet.h ckuath.h ckclib.h ck_ssl.$(EXT): ck_ssl.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \ ckclib.h ck_ssl.h ########################################################################### # # Entries to make C-Kermit for specific systems. # # Put the ones that need short makefiles first. #Apollo Aegis 9.x. Includes TCP/IP support. #You can also add processor-dependent optimization switches like -M570. aegis: @echo Making C-Kermit $(CKVER) for Apollo Aegis 9.x... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DNOCSETS -DCK_CURSES -O $(KFLAGS)" \ "LIBS = -lcurses -ltermcap" #Apple Mac II, A/UX pre-3.0 #Warning, if "send *" doesn't work, try the auxufs makefile entry below. aux: @echo Making C-Kermit $(CKVER) for Macintosh A/UX... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DAUX -DTCPSOCKET $(KFLAGS) -i -O" "LNKFLAGS = -i" #Apple Mac II, A/UX pre-3.0, compiled with gcc auxgcc: @echo Making C-Kermit $(CKVER) for Macintosh A/UX... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DAUX -DTCPSOCKET -traditional $(KFLAGS) -i -O" \ "LNKFLAGS = " "CC = gcc" "CC2 = gcc" #Apple Mac II, A/UX, pre-3.0, but with ufs file volumes, uses . auxufs: @echo Making C-Kermit $(CKVER) for Macintosh A/UX... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DAUX -DTCPSOCKET -DDIRENT $(KFLAGS) -i -O" "LNKFLAGS = -i" #Apple Mac II, A/UX 3.0, compiled with gcc aux3gcc: @echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DAUX -DHDBUUCP -DLFDEVNO -DTCPSOCKET -DDIRENT $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS = $(LIBS)" \ "CC=gcc -pipe -traditional" "CC2=gcc -pipe -traditional" #Apple Mac II, A/UX 3.0, compiled with gcc, uses curses aux3cgcc: @echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0... $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) aux3gcc \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DCK_CURSES" "LIBS = -lcurses $(LIBS)" # Tenon MachTen, tested on Apple Powerbook with MachTen 2.1.1.D. # NOTE: This doesn't do anything about UUCP. It only works if /usr/spool/uucp # has permission of 777, and dialout device is world read/writeable. machten: @echo Making C-Kermit $(CKVER) for MachTen... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD43 -DTCPSOCKET -DSIG_V -DNDGPWNAM -DCK_CURSES -O \ $(KFLAGS)" "LIBS=-lcurses -ltermcap" #Bell Labs Research UNIX V10 #Can't add TCP/IP because there is no sockets library. It would have to #be done using streams, but there is no code in C-Kermit for that. #Remove -DNOJC if desired (if your system has csh, ksh, or bash). bellv10: @echo Making C-Kermit $(CKVER) for Bell Labs Research UNIX V10... $(MAKE) wermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBELLV10 -DBSD4 -DNDIR -DNOJC -DNOSYSIOCTLH -DNOSETREU \ -DNOCSETS -MINIDIAL $(KFLAGS)" # WARNING: The early BSD entries do not build in version 7.0 with the stock # BSD compiler: "Too many defines". Unless you can rebuild cpp to have more # space for defines, these builds must be accomplished by: # copying the /usr/include tree to someplace else, preprocessing there with cc # -E -I./include or whatever (plus all the same -D's, adding any necessary # -U/-D to override the architecture)), renaming the the resulting files back # to their original names, bringing them back to the original BSD system, and # running the make target there. This technique was used for 4.2 and 4.3 BSD # on a VAX in C-Kermit 7.0 (later, cpp on that machine was rebuilt to allow # more symbols, so the C-Kermit 8.0 build proceeds normally). #Berkeley Unix 4.1 bsd41: @echo Making C-Kermit $(CKVER) for 4.1BSD... $(MAKE) wermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD41" "LIBS = -ljobs" #Berkeley 4.2, 4.3, also Ultrix-32 1.x, 2.x, 3.x, many others # Add -O, -s, etc, if they work. # If you have a version of BSD but signal() is void rather than int, # "make bsd KFLAGS=-DSIG_V". bsd42: @echo Making C-Kermit $(CKVER) for 4.2BSD... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \ -DCK_CURSES -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK -DBSD42HACK \ $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)" bsd: $(MAKE) CC=$(CC) CC2=$(CC2) bsd42 KTARGET=$${KTARGET-$(@)} #Berkeley Unix 4.2 or 4.3 with HoneyDanBer UUCP bsdhdb: @echo Making C-Kermit $(CKVER) for 4.2BSD with HDB UUCP... $(MAKE) CC=$(CC) CC2=$(CC2) bsd KTARGET=$${KTARGET-$(@)} \ "KFLAGS= -DHDBUUCP $(KFLAGS)" #Berkeley Unix 4.3 with acucntrl program, curses, TCP/IP included. bsd43: @echo Making C-Kermit $(CKVER) for 4.3BSD... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \ -DCK_CURSES -DACUCNTRL -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK \ -DBSD42HACK $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)" #4.3BSD, curses excluded bsd43nc: @echo Making C-Kermit $(CKVER) for 4.3BSD... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH \ -DACUCNTRL -DSYSTIMEBH -DNOIKSD -DNOPUTENV -DNOANSI -DBIGBUFOK \ -DBSD42HACK $(KFLAGS)" "LIBS=$(LIBS)" #4.3BSD, TCP/IP excluded. bsd43nonet: @echo Making C-Kermit $(CKVER) for 4.3BSD + curses... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \ -DCK_CURSES -DACUCNTRL -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK \ -DBSD42HACK -DNONET $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)" #Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx, #but without acucntrl program bsdlck: @echo Making C-Kermit $(CKVER) for 4.2BSD, /usr/spool/uucp/LCK/... $(MAKE) CC=$(CC) CC2=$(CC2) bsd KTARGET=$${KTARGET-$(@)} \ "KFLAGS= -DLCKDIR $(KFLAGS)" #Berkeley UNIX 4.4-Lite, 4.4-Encumbered, Net/2, etc (Post-Reno), #with TCP/IP networking. This was the basis for FreeBSD, NetBSD, OpenBSD, #BSDI, BSD/OS, and Mac OS X (each of which has its own set of targets that #are newer than this one). # #NOTE: This is not a pure POSIX configuration. Using -DPOSIX instead of # -DBSD44 prevents any kind of directory-reading (for wildcard expansion), #and disallows use of ENOTCONN symbol for detecting broken network #connections, and disallows RTS/CTS flow control, and would also require #definition of the appropriate UUCP lockfile convention. #Do not add -DCK_POSIX_SIG without reading first! For example, #sigsetjmp(), etc, tend to be defined but not implemented. # #NOTE: originally crypt was in libc - later it was unbundled. #Remove the LIBS clause to build on an early 4.4BSD platform. # bsd44: @echo Making C-Kermit $(CKVER) for 4.4BSD... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DTCPSOCKET $(KFLAGS) -O" "LIBS=-lcrypt" #Berkeley UNIX 4.4, as above, but with curses for fullscreen display #Please read notes for bsd44 entry just above. # NOTE: This one dumped core on the real 4.4BSD development system at # UC Berkeley (an HP-9000/300), so the no-curses version was used # for that one, which was unplugged years ago. bsd44c: @echo Making C-Kermit $(CKVER) for 4.4BSD with curses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O" \ "LIBS= -lcurses -ltermcap -lcrypt $(LIBS)" #For FreeBSD 1.x. freebsd1: @echo 'Making C-Kermit $(CKVER) for FreeBSD...' $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \ -DFNFLOAT -DNOHTERMCAP -DNOREALPATH -DNOSYSCONF $(KFLAGS) -O -pipe" \ "LIBS= -lcurses -ltermcap -lm $(LIBS)" #FreeBSD 2.x with ncurses freebsd2: @echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with ncurses...' $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \ -DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 -funsigned-char \ -DFNFLOAT $(KFLAGS) -O -pipe" \ "LIBS= -lncurses -ltermlib -lcrypt -lm $(LIBS)" #For FreeBSD 2.x -- Uses curses rather than ncurses freebsd2c: @echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with curses...' $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \ -DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 -DFNFLOAT \ -funsigned-char $(KFLAGS) -O -pipe" \ "LIBS= -lcurses -ltermlib -lcrypt -lm $(LIBS)" #FreeBSD 3.x with ncurses and uu_lock() #(Note: uu_lock() goes back to 2.2.2, but not necessarily 2.0) #OK 2011/08/20 FreeBSD 3.3 freebsd3: @echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with ncurses...' $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \ -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 -DUSE_UU_LOCK -DFNFLOAT \ $(KFLAGS) -O -pipe" \ "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)" #As above but with curses rather than ncurses. freebsd3c: @echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with curses...' $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_UU_LOCK \ -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 $(KFLAGS) -DFNFLOAT \ -funsigned-char -pipe -O" \ "LIBS= -lcurses -lcrypt -lutil -lm $(LIBS)" #FreeBSD 4.0 with ncurses and uu_lock(). Note - there is no curses in 4.0. #ncurses 5.0 is broken requiring us to work around with setbuf(). freebsd40: @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.x with ncurses...' $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -DFNFLOAT \ -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD4 \ -DNONOSETBUF -DUSE_UU_LOCK $(KFLAGS) -O -pipe" \ "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)" #FreeBSD 4.1 and above #Like FreeBSD 4.0 but without the NONOSETBUF hack and with CK_NEWTERM. #NOTE: This target definitely does not work for FreeBSD 3.3 in 9.0.302. #and it has not been tested on 4 or 5. #OK 2011/06/xx FreeBSD 3.3, 4,4, 4.7, and 8.2 #OK 2011/08/21 FreeBSD 3.3, 4.4, 6.4, 9.0 freebsd freebsd41 freebsd72 freebsd5 freebsd6 freebsd7 freebsd8 freebsd9: @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.1 or later...' @if test `uname -r | cut -d . -f 1` -ge 8; then \ HAVE_FBSD8='-DFREEBSD8'; \ else HAVE_FBSD8=''; fi; \ if test `uname -r | cut -d . -f 1` -ge 9; then \ HAVE_FBSD9='-DFREEBSD9'; \ else HAVE_FBSD9=''; fi; \ if test -f /usr/include/utmpx.h ; \ then HAVE_UTMPX='-DHAVEUTMPX' ; \ else HAVE_UTMPX='' ; fi; \ $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \ -DFREEBSD4 $$HAVE_FBSD8 $$HAVE_FBSD9 -DUSE_UU_LOCK -DFNFLOAT \ $$HAVE_UTMPX -DHERALD=\"\\\" `uname -rs`\\\"\" \ -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR $(KFLAGS) \ -O2 -pipe"\ "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)" #FreeBSD 5.0 or later with OpenSSL. #OK 2011/06/15 FreeBSD 4.7 and 8.2 #OK 2011/08/20 FreeBSD 9.0-CURRENT freebsd+ssl freebsd+openssl freebsd50+openssl: @echo 'Making C-Kermit $(CKVER) for FreeBSD with Kerberos 5...' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac; \ HAVE_DES=''; \ DES_LIB=''; \ if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \ ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ $(MAKE) freebsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \ KFLAGS="-DCK_AUTHENTICATION -DCK_SSL $(SSLINC) -DZLIB $$OPENSSLOPTION \ $$HAVE_DES $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS= -lncurses -lcrypt -lssl -lcrypto -lutil -lm \ $(SSLLIB) $$DES_LIB $(LIBS)"; \ if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \ echo ""; \ echo "If build failed try:"; \ echo ""; \ echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \ echo ""; \ fi #NetBSD 1.4.1 or later with vanity banner automated with uname #and automatic inclusion of large file support if it is available. #This target tested successfully on NetBSD 1.4.1, 1.5.2, and 2.0.3 (Jan 2006). #Fails on NetBSD 2.0 on Sun/3 mc68030 with gcc 3.3.3 unless optimization is #disabled on ckcfn2.c ("KFLAGS=-O0") (Letter O Digit Zero). #(This could be automated by testing `uname -m` for "sun3".) #OK: 2011/06/15 on NetBSD 1.5.2 and 5.1. #OK: 2011/08/21 on 5.1. netbsd netbsd2 netbsd15 netbsd16 old-netbsd: @echo Making C-Kermit $(CKVER) for NetBSD with curses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS=`grep fseeko /usr/include/stdio.h > /dev/null && \ echo '-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'` \ -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DHAVE_OPENPTY \ -funsigned-char -DHERALD=\"\\\" NetBSD `uname -r`\\\"\" \ -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \ "LIBS= -lcurses -lcrypt -lm -lutil $(LIBS)" #NetBSD 1.4.1 or later with OpenSSL #OK: 2011/06/15 on NetBSD 5.1 (but not 1.5.2 with OpenSSL 0.9.5a) #OK: 2011/08/21 on 5.1. netbsd+ssl netbsd+openssl: @echo 'Making C-Kermit $(CKVER) for NetBSD+OpenSSL SSLLIB=$(SSLLIB)' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac; \ HAVE_DES=''; \ DES_LIB=''; \ if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \ ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ $(MAKE) netbsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \ "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_CAST $$HAVE_DES \ -DCK_SSL -DCK_PAM -DZLIB -DNO_DCL_INET_ATON $$OPENSSLOPTION \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS= -L/usr/pkg/lib -R/usr/pkg/lib -lssl $$DES_LIB -lcurses \ -lcrypto -lcrypt -lz -lm -lpam -lutil $(LIBS)" #NetBSD with MIT Kerberos 5: # OK 2011/06/15 (once K5INC and K5LIB were set right). # NOT OK for Heimdal - Heimdal Kerberos support in C-Kermit needs work. # OK: 2011/08/21 on 5.1. netbsd+krb5: @echo 'Making C-Kermit $(CKVER) for NetBSD with Kerberos 5...' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac; \ HAVE_DES=''; \ DES_LIB=''; \ if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \ ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ $(MAKE) netbsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \ "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_KERBEROS -DKRB5 \ -DCK_CAST $$HAVE_DES -DNOFTP_GSSAPI $(K5INC) $(K5INC)/krb5 \ $(KFLAGS)" \ "LIBS= $(K5LIB) -L/usr/pkg/lib -R/usr/pkg/lib -lcurses $$DES_LIB \ -lcrypto -lgssapi -lkrb5 -lm -lutil $(LIBS)" # NetBSD - With Kerberos 5 and SSL and Zlib. # OK: 2011/08/21 on 5.1 with MIT Kerberos. netbsd+krb5+ssl netbsd+krb5+openssl+zlib: @echo 'Making C-Kermit $(CKVER) for NetBSD+OpenSSL+Kerberos5...' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac; \ HAVE_DES=''; \ DES_LIB=''; \ if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \ ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ $(MAKE) netbsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \ "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_CAST $$HAVE_DES \ -DCK_KERBEROS -DKRB5 -DNOFTP_GSSAPI $(K5INC) $(K5INC)/krb5 \ -DCK_SSL -DCK_PAM -DZLIB -DNO_DCL_INET_ATON $$OPENSSLOPTION \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS= $(K5LIB) -L/usr/pkg/lib -R/usr/pkg/lib -lssl $$DES_LIB \ -lcrypto -lcrypt -lgssapi -lkrb5 -lz -lm -lpam -lutil -lcurses $(LIBS)" #Special Security Enhanced NetBSD target with SRP, SSL, and zlib support. #To build this, you need to BUILD the pkgsrc srp_client package. After #you build it, you must go into work/srp-x.y.z/libkrypto and "bmake install" #then go to work/srp-x.y.z/libsrp and "bmake install". As of 2005Q3, the #pkgsrc install only installed the statically linked client applications. You #need to manually install the libraries to build your own applications. #NOT TESTED RECENTLY - probably needs work. netbsd+ssl+srp+zlib: @echo Making C-Kermit $(CKVER) for NetBSD with curses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DNETBSD15 \ -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DHAVE_OPENPTY \ -I/usr/include/openssl -I/usr/pkg/include \ -DCK_AUTHENTICATION -DCK_SRP -DPRE_SRP_1_4_5 -DCK_ENCRYPTION \ -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DZLIB -DFNFLOAT $(KFLAGS) -O" \ "LIBS= -L/usr/pkg/lib -R/usr/pkg/lib -lcurses -lsrp -lgmp -ldes \ -lssl -lkrypto -lcrypto -lcrypt -lz -lm -lutil $(LIBS)" #NetBSD with curses left out (e.g. for use as IKSD). netbsdnc: @echo Making C-Kermit $(CKVER) for NetBSD with no curses... $(MAKE) CC=$(CC) CC2=$(CC2) netbsd KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOCURSES" #NetBSD with ncurses requested explicitly rather than curses-which-is-ncurses netbsdn: @echo Making C-Kermit $(CKVER) for NetBSD with curses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS=`grep fseeko /usr/include/stdio.h > /dev/null && \ echo '-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'` \ -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DHAVE_OPENPTY \ -DHERALD=\"\\\" NetBSD `uname -r`\\\"\" \ -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \ "LIBS= -L/usr/pkg/lib -lncurses -lcrypt -lm -lutil $(LIBS)" #OpenBSD before 2.3. #Uses ncurses as its curses so use -ltermlib, not -ltermcap #But it doesn't use uu_lock() which was introduced in OpenBSD 2.3. #For that use the next entry. #Add -DMAINTYPE=int if you get complaints about main: return type is not int. openbsdold: @echo Making C-Kermit $(CKVER) for OpenBSD... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \ -DFNFLOAT -DNDSYSERRLIST $(KFLAGS) -O" "LIBS= -lcurses -ltermlib -lm" #OpenBSD 2.3 or later #Add -DMAINTYPE=int if you get complaints about main: return type is not int. #For C-Kermit 8.0 (Christian Weisgerber): # -ltermlib removed (presumably because -lcurses==ncurses already includes it) # -DUSE_UU_LOCK and -lutil added for uu_lock() # -DNDSYSERRLIST changed to -DUSE_STRERROR #If this gives you trouble use the previous entry. #NOTE: The openbsd and openbsd+ssl should be reworked to be like the #corresponding FreeBSD and NetBSD targets. The mirbsd targets should openbsd: @echo Making C-Kermit $(CKVER) for OpenBSD 2.3 or later... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \ -DHERALD=\"\\\" OpenBSD `uname -r`\\\"\" \ -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR $(KFLAGS) -O" \ "LIBS= -lcurses -lutil -lm" #Better to chain to the openbsd target but... mirbsd: @echo Making C-Kermit $(CKVER) for OpenBSD 2.3 or later... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \ -DHERALD=\"\\\" MirBSD `uname -r`\\\"\" \ -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR $(KFLAGS) -O" \ "LIBS= -lcurses -lutil -lm" #OpenBSD 3.0 or later includes OpenSSL #Add -DMAINTYPE=int if you get complaints about main: return type is not int. #For C-Kermit 8.0 (Christian Weisgerber): # -ltermlib removed (presumably because -lcurses==ncurses already includes it) # -DUSE_UU_LOCK and -lutil added for uu_lock() # -DNDSYSERRLIST changed to -DUSE_STRERROR #If this gives you trouble use the previous entry. openbsd+ssl: @echo Making C-Kermit $(CKVER) for OpenBSD 3.0 or later... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \ -DHERALD=\"\\\" OpenBSD `uname -r`\\\"\" \ -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR -DCK_AUTHENTICATION \ -DCK_SSL $(KFLAGS) -O" \ "LIBS= -lcurses -lutil -lm -lssl -lcrypto" mirbsd+ssl: @echo Making C-Kermit $(CKVER) for OpenBSD 3.0 or later... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \ -DHERALD=\"\\\" MirBSD `uname -r`\\\"\" \ -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR -DCK_AUTHENTICATION \ -DCK_SSL -DNO_DCL_INET_ATON $(KFLAGS) -O" \ "LIBS= -lcurses -lutil -lm -lssl -lcrypto" # make 386bsd 0.0new, posix # for 386bsd 0.1.24, change /usr/include/termios.h to #define NCCS if # _POSIX_SOURCE is #defined. (source: lewine, posix prgmrs guide, o`reilly) #NOTE: Lock directory is /var/spool/lock. Formerly, it was /var/spool/uucp, #but reportedly that was due to a typo in 'man tip'. 386bsd: @echo 'Making C-Kermit $(CKVER) for jolix 386BSD 0.0new and 0.1.24...' $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DSETREUID -DPIDSTRING -DUSLEEP \ -D_386BSD -DCK_CURSES -DTCPSOCKET \ -DLOCK_DIR=\\\"/var/spool/lock\\\" \ $(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lcurses -ltermcap" # Mac OS X 10 early versions. # For 10.3.9 and later, use the macosx target below. #Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP but no curses. oldmacosx10: @echo Making C-Kermit $(CKVER) for `uname -s`... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DTCPSOCKET -DUSE_STRERROR -O $(KFLAGS)" #Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP and curses. #Note: curses must be obtained separately. See next entry for ncurses. #Add "LIBS = -lcurses -ltermcap" if necessary (but reportedly it is not). oldmacosx10c: @echo Making C-Kermit $(CKVER) for `uname -s` + curses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DCK_CURSES -DTPUTSFNTYPE=void -DTPUTSISVOID \ -DTCPSOCKET -DUSE_STRERROR -O $(KFLAGS)" #Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP and ncurses. #Note: ncurses must be obtained separately. #In the event of trouble with this one try the next one. oldmacosx10nc: @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR -O \ $(KFLAGS)" "LIBS= -lncurses $(LIBS)" #Mac OS X 10.2 (Jaguar) ncurses. oldmacosx102nc: @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR -O \ $(KFLAGS) " "LIBS= -lncurses $(LIBS)" #The problem here is that if curses.h also exists, it conflicts with #ncurses.h and and we have fatal errors. If this happens to you, then #try this target. oldmacosx10ncx: @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses... @rm -f ./curses.h; touch ./curses.h $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR \ -I. -O $(KFLAGS) " \ "LIBS= -lncurses $(LIBS)" @rm -f ./curses.h #Mac OS X 10.3 (Panther) - Assumes ncurses is installed. oldmacosx103: @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DMACOSX103 -DCK_NCURSES -DTCPSOCKET -DCKHTTP \ -DUSE_STRERROR -DUSE_NAMESER_COMPAT -O \ $(KFLAGS) " "LIBS= -lncurses -lresolv $(LIBS)" #Mac OS X 10.3 (Panther) with Kerberos 5 and SSL, assumes ncurses is installed. oldmacosx103+secure: @echo Making Secure C-Kermit $(CKVER) for `uname -s` + ncurses... $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DMACOSX103 -DCK_NCURSES -DTCPSOCKET \ -DUSE_STRERROR -DUSE_NAMESER_COMPAT -O -DCK_PAM \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DZLIB \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \ $(KFLAGS) " "LIBS= -lssl -lcrypto -lkrb5 -lcom_err \ -lk5crypto -lgssapi_krb5 -lpam -lncurses -lresolv $(LIBS)" # THIS IS THE MAIN MAC OS X TARGET (the next one is for Kerberos/SSL builds). # Use this target for 10.3.9 (or maybe earlier) through 10.6 (maybe later) # on both Power and Intel architectures. This one uses utmp.h on 10.4 and # earlier and utmpx.h on 10.5 onwards. # Note: Mac OS X 10.5 and earlier are 32-bit; 10.6 and later 64-bit. # Note 2: As of C-Kermit 9.0 -NOUUCP is included by default because # Mac OS X doesn't support UUCP. To undo this, use KFLAGS=-UNOUUCP. #OK: 2011/06/14 (for 10.4.11, 10.5.8, 10.6.7) macosx macosx10 macosx10.3.9 macosx10.4 macosx10.5 macosx10.6: @MACOSNAME=`/usr/bin/sw_vers -productName`; \ MACOSV=`/usr/bin/sw_vers -productVersion`; \ echo Making C-Kermit $(CKVER) for $$MACOSNAME $$MACOSV... ; \ MACCPU=$$HOSTTYPE; \ if test `uname -r | cut -d . -f 1` -gt 8; \ then if test -f /usr/include/utmpx.h ; \ then HAVE_UTMPX='-DHAVEUTMPX -D_UTMPX_COMPAT' ; \ else HAVE_UTMPX='' ; fi ; fi; \ $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 -DMACOSX103 -DCK_NCURSES -DTCPSOCKET -DCKHTTP \ -DUSE_STRERROR -DUSE_NAMESER_COMPAT -DNOCHECKOVERFLOW -DFNFLOAT \ -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $$HAVE_UTMPX \ -funsigned-char -DNODCLINITGROUPS \ -DNOUUCP -O -DHERALD=\"\\\" $${MACOSNAME} $${MACOSV}\\\"\" \ -DCKCPU=\"\\\"$${MACCPU}\\\"\" \ $(KFLAGS)" "LIBS= -lncurses -lresolv $(LIBS)" # Mac OS X 10.3.9 or later with Kerberos 5 and OpenSSL... # NOTE: Apple has removed all support for DES in OpenSSL and Kerberos # in Mac OS X 10.6 and later. The DES flags are included or left out # automatically based on the Mac OS X version number. # See note about UUCP in previous target. #OK: 2009/11/16 (for 10.3.9, 10.4.11, 10.5.8, 10.6.1) #OK: 2011/06/14 (for 10.4.11, 10.5.8, 10.6.7) macosx+krb5+ssl macosx10.5+krb5+ssl macosx10.6+krb5+ssl \ macosx+krb5+openssl macosx10.5+krb5+openssl macosx10.6+krb5+openssl: @MACOSNAME=`/usr/bin/sw_vers -productName`; \ MACOSV=`/usr/bin/sw_vers -productVersion`; \ echo Making C-Kermit $(CKVER) for $$MACOSNAME $$MACOSV... ; \ MACCPU=$$HOSTTYPE; \ if test `uname -r | cut -d . -f 1` -gt 8; \ then if test -f /usr/include/utmpx.h ; \ then HAVE_UTMPX='-DHAVEUTMPX -D_UTMPX_COMPAT' ; \ else HAVE_UTMPX='' ; fi ; fi; \ if test `uname -r | cut -d . -f 1` -eq 7; \ then IS_MACOSX103='-DMACOSX103' ; \ else IS_MACOSX103='' ; fi; \ case $$MACOSV in \ 10.[012345].*) HAVE_DES='-DCK_DES -DLIBDES' ;; \ *.*) HAVE_DES='' ;; \ esac ; \ if test -x /usr/bin/krb5-config ; \ then HAVE_KRB5CONFIG=`/usr/bin/krb5-config --libs krb5 gssapi` ; \ else HAVE_KRB5CONFIG='-lgssapi_krb5 -lkrb5 -lk5crypto \ -lcom_err -lresolv' ; fi; \ $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMACOSX10 $$IS_MACOSX103 -DCK_NCURSES -DTCPSOCKET \ -DUSE_STRERROR -DUSE_NAMESER_COMPAT -DNOCHECKOVERFLOW -DFNFLOAT \ -DCKHTTP -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $$HAVE_UTMPX \ -DNODCLINITGROUPS -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DZLIB \ -DCK_ENCRYPTION -DCK_CAST -DCK_SSL -DOPENSSL_098 $$HAVE_DES \ -DNOUUCP -DHERALD=\"\\\" $${MACOSNAME} $${MACOSV}\\\"\" \ -DCKCPU=\"\\\"$${MACCPU}\\\"\" \ -funsigned-char -O $(KFLAGS)" \ "LIBS= $$HAVE_KRB5CONFIG -lssl -lcrypto -lpam -lncurses $(LIBS)" # End of Mac OS X Section #Acorn RISCiX, based on ... #Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx, #but without acucntrl program riscix: @echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \ -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \ -DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \ -DDFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \ -DNOANSI -w -O2 -fomit-frame-pointer" \ "LIBS= -lcurses -ltermcap " \ "CC= /usr/ucb/cc" \ "CC2= /usr/ucb/cc" #Acorn RISCiX, as above, but using gcc riscix-gcc: @echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \ -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \ -DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \ -DDFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \ -DNOANSI -w -O2 -fomit-frame-pointer" \ "LIBS= -lcurses -ltermcap " \ "CC= gcc -mbsd" \ "CC2= gcc -mbsd" #Convergent CTIX 6.4.1 ctix: @echo 'Making C-Kermit $(CKVER) for Convergent CTIX 6.4.1' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSVR3 -DDIRENT -DTCPSOCKET -DHDBUUCP -DCK_CURSES \ -DNONAWS -DNOLEARN -DNOLONGLONG $(KFLAGS) -XO" \ "LNKFLAGS=-s" "LIBS=-lsocket -lcurses -lc_s" mcs -d wermit # The following makefile entry should work for any Harris Night Hawk system # (either 88k or 68k based) running release 6.1 or later of the CX/UX # operating system. This is a POSIX and ANSI-C compliant system which also # supports BSD networking. (Earlier CX/UX releases will probably work with # sys5r3, but this has not been verified). # cx_ux: @echo Making C-Kermit $(CKVER) for Harris Night Hawk CX/UX 6.1 or later $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS=-DPOSIX -DTCPSOCKET -DHDBUUCP -DPID_T=pid_t -DWAIT_T=int \ -Dd_ino=d_fileno -DUID_T=uid_t -DGID_T=gid_t -DNOLONGLONG \ $(KFLAGS) -Xa -O3 -g" "LNKFLAGS=-O3" #Intergraph Clipper, CLIX, job control, HDB UUCP. clix: @echo 'Making C-Kermit $(CKVER) for Intergraph CLIX...' $(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \ -DNOGETUSERSHELL -DNOREALPATH -DNOLEARN $(KFLAGS) -O" \ "LNKFLAGS=" "LIBS= -lbsd" #As above + TCP/IP... clixnet: @echo 'Making networked C-Kermit $(CKVER) for Intergraph CLIX...' $(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \ -DTCPSOCKET -DNOGETUSERSHELL -DNOLEARN -DNOREALPATH $(KFLAGS) -O" \ "LNKFLAGS=" "LIBS= -lbsd" #Mark Williams Coherent 286 or 386 on IBM PC family. #There is a 64K limit on program size, so this is a command-line only version. coherent: $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOICP -DNOSETKEY -DNOLEARN \ -DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG -DNOXMIT \ -DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DSELECT_H $(KFLAGS) -VSUVAR" \ -DNOFLOAT KTARGET=$${KTARGET:-$(@)} wermit #Mark Williams Coherent 386 on IBM PC family. #This will make a "minimum interactive" version - no scripts, #no character sets, no help, no dial, no debug/transaction logging, no #transmit, msend, mail, type, etc. coherentmi: $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOSETKEY -DNOLEARN \ -DNOSHOW -DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG \ -DNOXMIT -DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DNOSERVER -DNOUUCP \ -DNOSPL -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ -DNOFLOAT \ -DNOCMDL $(KFLAGS) -VSUVAR -DSELECT_H" KTARGET=$${KTARGET:-$(@)} \ wermit #Mark Williams Coherent 386 on IBM PC/AT family. coherentmax: $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DSELECT_H -DNOLEARN \ -DNOFLOAT -DNOSYSIOCTLH $(KFLAGS) -VSUVAR" "LNKFLAGS = -O -s" \ KTARGET=$${KTARGET:-$(@)} wermit #Mark Williams Coherent 386 4.2. Includes curses but not TCP/IP. #Requires updates to the 4.2.10 compiler; the regular compiler fails to #to handle "complex expressions". NOFLOAT is so it can work on old PCs #without floating-point hardware. coherent42: $(MAKE) "CFLAGS = -T500000 -DNOFLOAT -DCOHERENT -DNOANSI -DSELECT \ -DNOSYSLOG -DDIRENT -DCK_CURSES -DCK_NEWTERM -DCK_WREFRESH -VSUVAR \ -DDCLGETCWD -DNOSYSIOCTLH -DNOINITGROUPS -DNOSYMLINK -DSELECT_H \ -DDCLGETCWD -O $(KFLAGS)" \ "LNKFLAGS = -O -s" KTARGET=$${KTARGET:-$(@)} \ "LIBS = -lsocket -lcurses" wermit #DEC Ultrix 2.x # Add -O, -DDYNAMIC, -s, etc, if they work. ultrix2x: @echo Making C-Kermit $(CKVER) for Ultrix 2.x ... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DDU2 -DNOGETUSERSHELL $(KFLAGS)" du2: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix2x #DEC Ultrix 3.0 and 3.1 ultrix30: @echo Making C-Kermit $(CKVER) for Ultrix 3.0... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DDIRENT -DSIG_V -DNOGETUSERSHELL \ -DULTRIX3 -DCK_CURSES $(KFLAGS) -O" "LIBS= -lcurses -ltermcap" du3: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix30 ultrix3x: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix30 #DEC Ultrix 4.0 or 4.1 on DECstation, VAXstation, VAX, etc. ultrix40: @echo Making C-Kermit $(CKVER) for Ultrix 4.0 or 4.1... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DDU4 -DNOGETUSERSHELL \ $(KFLAGS) -Olimit 1450" "LNKFLAGS = -s" #DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc. #Like ultrix40, except now C compiler supports -O2 optimization. ultrix42: @echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL $(KFLAGS) \ -O2 -Olimit 1750" "LNKFLAGS = -s" du42: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix42 #DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc. #Like du42, but with curses support added and a couple features. ultrix42c: @echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \ -DCK_CURSES -DNOIKSD $(KFLAGS)-G6 -O2 -Olimit 3000 " \ "LNKFLAGS = -s" "LIBS= -lcurses -ltermcap" ultrix43: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ "KFLAGS=-DULTRIX43 $(KFLAGS)" KTARGET=$${KTARGET-$(@)} ultrix42c ultrix43notcp: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ "KFLAGS=-DULTRIX43 -DNONET $(KFLAGS)" \ KTARGET=$${KTARGET-$(@)} ultrix42c # NOTE: need -DNODEBUG on MIPS to avoid relocation errors at link time. # Actually now (8.0) that we have discovered the -G option maybe debugging # can be put back. ultrix44: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ "KFLAGS=-DULTRIX44 -G7 -DNODEBUG -DNETPTY -DNO_DEVTTY $(KFLAGS)" \ KTARGET=$${KTARGET-$(@)} ultrix42c ultrix45: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ "KFLAGS=-DULTRIX45 $(KFLAGS)-DNETPTY -DNO_DEVTTY $(KFLAGS)" \ KTARGET=$${KTARGET-$(@)} ultrix42c du42c: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ KTARGET=$${KTARGET-$(@)} ultrix42c #DEC Ultrix 4.3A or later on DECsystem and DECstation 5000/50, /150 or /260 #with MIPS R4x00 processor. The "-mips3" switch generates R4000-specific #code, which is faster and more compact, but *won't* run on earlier #DECsystems and DECstations. ultrix43-mips3: @echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \ $(KFLAGS) -O2 -Olimit 1750 -mips3" "LNKFLAGS = -s -mips3" du43-mips3: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) ultrix43-mips3 #DEC Ultrix 4.3A or later on MIPS R4x000 based systems. #Like ultrix43-mips3 but with curses support added ultrix43c-mips3: @echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL -DCK_CURSES \ $(KFLAGS) -O2 -Olimit 3000 -mips3" "LNKFLAGS = -s -mips3" \ "LIBS= -lcurses -ltermcap" du43c-mips3: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ KTARGET=$${KTARGET-$(@)} ultrix43c-mips3 #DEC Ultrix 4.4 on DECstation 5000/50 or /150 with R4000 MIPS processor, #or 5000/260 with R4400. The "-mips3" switch generates R4000-specific code, #which is faster and more compact but *won't* run on earlier DECstations. ultrix44-mips3: @echo Making C-Kermit $(CKVER) for Ultrix 4.4, R4000 cpu ... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \ $(KFLAGS) -O2 -Olimit 1450 -mips3" "LNKFLAGS = -s -mips3" du44-mips3: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ KTARGET=$${KTARGET-$(@)} ultrix44c-mips3 #DEC Ultrix 4.2 on DECstation, VAXstation, VAX, etc, System V R4 environment ultrix42s5r4: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4 on Ultrix...' $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS = -O2 -Olimit 1500 -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \ -DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s" #OSF/1 osf osf1: $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \ -DCK_CURSES -DCK_RTSCTS -DFNFLOAT $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS = $(LIBS) -lbsd -lcurses -ltermcap -lm" #DEC OSF/1 V1.0-1.3 on DECstation, VAX, Alpha, or PC. dec-osf dec-osf1: $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD4 -DOSF -DOSF13 -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \ -DNOREALPATH -DNOIKSD -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DNODEBUG \ -DNOUNICODE $(KFLAGS)" \ "LNKFLAGS = -non_shared" "LIBS = -lbsd -lcurses -ltermcap -lm" # This one causes "relocation out-of-range" errors in the linker. old-dec-osf: @echo Making C-Kermit $(CKVER) for DEC OSF/1 V1.x... @echo If you are building for DEC OSF/1 2.0, please use dec-osf20. @echo Remove or adjust -O2 and/or -Olimit if they cause trouble. $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -O2 -Olimit 2400 $(KFLAGS)" #DEC OSF/1 2.0 on Alpha and probably nowhere else. #The only difference from OSF/1 is that optimization is omitted. #The optimized version gets strange runtime errors, like the PAUSE command #not working. Add "-unsigned" to make all chars unsigned. dec-osf20: @echo Making C-Kermit $(CKVER) for DEC OSF/1 V2.0... @echo Optimization omitted because it causes runtime errors. @echo See comments in makefile. $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF20 $(KFLAGS)" dec-osf30: @echo Making C-Kermit $(CKVER) for DEC OSF/1 V3.0... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF30 -O2 -Olimit 2400 $(KFLAGS)" #Digital UNIX 3.2 # Must compile ckuus[6x].c separately without optimization otherwise # the optimizer dumps core - keep CFLAGS here in sync with those from osf. du32: @echo Making C-Kermit $(CKVER) for Digital UNIX 3.2... $(MAKE) CC=$(CC) CC2=$(CC2) ckuus6.$(EXT) \ "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \ -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DOSF32 -DHDBUUCP $(KFLAGS)" $(MAKE) CC=$(CC) CC2=$(CC2) ckuusx.$(EXT) \ "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \ -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DOSF32 -DHDBUUCP $(KFLAGS)" $(MAKE) CC=$(CC) CC2=$(CC2) osf \ "KFLAGS= -DOSF32 -DHDBUUCP -O2 -Olimit 3200 $(KFLAGS)" dec-osf32: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) du32 \ KTARGET=$${KTARGET:-$(@)} #Digital UNIX 4.0 through 4.0D (use tru64 targets for 4.0E and above)... du40: @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF40 -DHDBUUCP -DFNFLOAT \ -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm" du40gcc: @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0 with gcc ... $(MAKE) osf CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF40 -DHDBUUCP $(KFLAGS)" #Tru64 Unix 4.0E tru64-40e: @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0E... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF40 -DOSF40E -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \ -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm" tru64-40f: @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0F... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF40 -DOSF40F -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \ -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm" tru64-40g: @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0G... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF40 -DOSF40G -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \ -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm" tru64-50a: @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.0A... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DTRU64 -DOSF50 -DHDBUUCP \ -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" tru64-51a: @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1A... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DHDBUUCP \ -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" tru64-51b: @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1B... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DOSF51B -DHDBUUCP \ -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" # Added 5.1b version with OpenSSL - CDW 6-13-2005... tru64-51b+openssl: @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1b @echo including OpenSSL... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DOSF51B -DHDBUUCP \ -unsigned -std1 -O3 -Olimit 2400 \ -DCK_AUTHENTICATION -DCK_SSL $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -rpath $(sslroot)/ssl/lib -lssl -lcrypto" du50: $(MAKE) CC=$(CC) CC2=$(CC2) tru64-50a KTARGET=$${KTARGET:-$(@)} du40-ridiculous-checking: @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0. @echo Checking everything - assumes DECC... $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= -DOSF40 -DHDBUUCP -w0 -warnprotos -check -portable \ -unsigned -std1 -O3 -Olimit 1760 $(KFLAGS)" #Sequent DYNIX/ptx 1.2.1 dynixptx12: @echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.2.1... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DPTX -DNOGETUSERSHELL -DNOLEARN \ -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t $(KFLAGS) -i -O" \ "LNKFLAGS = -i" #Sequent DYNIX/ptx 1.3 or 1.4 dynixptx13: @echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.3 TCP/IP... $(MAKE) xermit "CFLAGS= -O KTARGET=$${KTARGET:-$(@)} \ -DSVR3 -DDIRENT -DHDBUUCP -DPTX -DCK_POLL -DNOGETUSERSHELL \ -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DTCPSOCKET $(KFLAGS) -i" \ "LNKFLAGS = -i" "LIBS = -lsocket -linet -lnsl" #Sequent DYNIX/ptx 2.0, ANSI C compilation #Should work on any hardware platform when DYNIX/ptx runs, including #386, 486, Pentium. dynixptx20: @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \ -DWAIT_T=int -DPTX -DNOGETUSERSHELL $(KFLAGS) -O" \ "LIBS = -lsocket -linet -lnsl" #Sequent DYNIX/ptx 2.0, ANSI C compilation, with curses dynixptx20c: @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int -DPTX -DCK_CURSES \ -DCK_NEWTERM -DNOGETUSERSHELL $(KFLAGS) -O" \ "LIBS = -lsocket -linet -lnsl -lcurses -ltermcap" #Sequent DYNIX/ptx 2.1.6, 80486, ANSI C compilation, with curses: # -Xa -- use ANSI compiler. # -Wc,-pw -- suppress portability warnings. # -Wc,-i386 -- 80386 cpu. # -Wc,-i486 -- 80486 cpu. # -Wc,-P5 -- Pentium (default). # -Wc,-O3 -- highest optimization. # -Wa,-N17061 -- increase symbol table from default of 15013 for ckcuni.c. # Early versions of DYNIX/ptx 2.1.x may need -DCK_POLL instead of -DSELECT. # Add "$&" after the colon in the "xermit" target for parallel makes. dynixptx216c: @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \ -DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \ -DTCP_NODELAY=1 -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \ -DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \ $(KFLAGS) -Xa -Wc,-pw -Wc,-i486 -Wc,-O3 -Wa,-N17061" \ "LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \ "LNKFLAGS = -s" #Sequent DYNIX/ptx 2.1.6, gcc 2.7.2.2, with curses: dynixptx216cgcc: @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6 gcc' $(MAKE) xermit "CC = gcc" "CC2 = gcc" KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \ -DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \ -DTCP_NODELAY=1 -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \ -DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \ $(KFLAGS) -O3 -pipe -funsigned-char" \ "LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \ "LNKFLAGS = -s" #Sequent DYNIX/ptx 4.0, ANSI C compilation, with curses dynixptx41c: @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.0...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \ -DWAIT_T=int -DPTX -DPTX4 -DCK_CURSES -DCK_NEWTERM \ -DNOGETUSERSHELL $(KFLAGS) -O" \ "LIBS = -lsocket -lnsl -lcurses -ltermcap" #Sequent DYNIX/ptx 4.4, ANSI C compilation, with curses dynixptx44: @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPTX -DPTX4 -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int \ -DCK_CURSES -DCK_NEWTERM -DBIGBUFOK -DSELECT -DNOGETUSERSHELL \ $(KFLAGS) -O" "LIBS = -lsocket -lnsl -lcurses -ltermcap" #Sequent DYNIX 3.0.x dynix3: @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O \ -DPWUID_T=int -DGID_T=int $(KFLAGS)" #Sequent DYNIX 3.0.x, no ACUCNTRL dynix3noacu: @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD43 -DLCKDIR -DTCPSOCKET -O \ -DUID_T=int -DGID_T=int $(KFLAGS)" #Sequent DYNIX 3.1.x dynix31: @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.x... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DDCLPOPEN -DLCKDIR -DBSD4 -DTCPSOCKET $(KFLAGS)" #Sequent DYNIX 3.1.2, as above but with curses, to be compiled by gcc 2.3.3. dynix31c: @echo 'Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.2, curses...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O2 -DDCLPOPEN -DACUCNTRL \ -DBSD43 -DTCPSOCKET -DCK_CURSES -DUID_T=int \ $(KFLAGS)" "LIBS= -lcurses -ltermcap" #Convex C1 with Berkeley Unix convex: @echo Making C-Kermit $(CKVER) for Convex C1 / BSD... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD4 -DNOLEARN $(KFLAGS) -Dmsleep=mnap" #Convex C210 with Convex/OS 8 convex8: @echo Making C-Kermit $(CKVER) for Convex C210 with OS 8 $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DNODEBUG -DDIRENT -DNOFILEH \ $(KFLAGS) -DSIG_V -Dmsleep=mnap" #Convex C2 with Convex OS 9.1 (should also work with 8.1 or later) #with ANSI C compiler, uses BSD 4.3 uucp lockfile convention. convex9: @echo Making C-Kermit $(CKVER) for Convex C210 with OS 9.1 $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \ -D__STDC__ -DLCKDIR -Dmsleep=mnap -O -ext -tm c1 $(KFLAGS)" \ "LNKFLAGS = -ext" #Convex C2 with Convex OS 10.1 or later #with gcc 2.x C compiler convex10gcc: @echo Making C-Kermit $(CKVER) for Convex C2 with OS 10.1 using gcc $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \ -D__STDC__ -Dmsleep=mnap -O2 $(KFLAGS)" CC=gcc CC2=gcc #Cray X-MP or Y-MP UNICOS 6.x or 7.x. #NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple #processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16. cray: @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 6.x or 7.0... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1" #Cray X-MP or Y-MP UNICOS 8.0 Alpha. cray8: @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 8.0 Alpha... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \ "CFLAGS= -DSVR4 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1" #Cray X-MP or Y-MP UNICOS 9.0. #This one was executed successfully for C-Kermit 8.0.209. #Earlier versions of Unicos will probably need the same flags. cray9: @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 9.0... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \ "CFLAGS= -DSVR4 -DDIRENT -DHDBUUCP -DNOLFDEVNO \ -DTCPSOCKET $(KFLAGS) -O1" #Cray-2 or Cray 3-CSOS #NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple #processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16. craycsos: @echo 'Making C-Kermit $(CKVER) for Cray-2/3 CSOS $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET \ $(KFLAGS) -DCK_ANSIC -DCK_CURSES" "LIBS=-lnet" #NeXTSTEP 1.0 through 3.2. #Includes fullscreen file transfer display (curses) and TCP/IP support. #Uses shared library to make executable program about 80K smaller. #Remove "LIBS = -lsys_s" if this causes trouble. next: @echo Making C-Kermit $(CKVER) for NeXTSTEP... @echo 'If you get errors in ckutio.c about w_S, w_T, etc,' @echo 'add KFGLAGS=-DNOREDIRECT to your make command.' $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \ -pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap" nextc: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \ KTARGET=$${KTARGET:-$(@)} nextg: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \ KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)} nextgc: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \ KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)} #NeXTSTEP 3.3. #Includes fullscreen file transfer display and TCP/IP. # You might have to add 1 line to 1 NeXT header file # to declare n_long as u_long by adding #include next33: @echo Making C-Kermit $(CKVER) for NeXTSTEP 3.3... $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \ -pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap" #OPENSTEP 4.2 for Sparc, m680x0, HP PA-RISC, and Intel. #Includes fullscreen file transfer display and TCP/IP. #ckcpro.c compiled without optimization because it crashes the compiler. openstep42: @echo Making C-Kermit $(CKVER) for OPENSTEP 4.2... $(MAKE) ckcpro.$(EXT) \ "CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \ -DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -w" $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \ -DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -O -w" \ "LIBS = -lsys_s -lcurses -ltermcap" #NeXT with malloc debugger nextmd: @echo Making C-Kermit $(CKVER) for NeXT with malloc debugging... $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \ -DCK_CURSES $(KFLAGS) -O -w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \ "LIBS = -lsys_s -lcurses -ltermcap" #Build for NeXTSTEP with "fat" binaries (MABs) that run on both Motorola #and Intel platforms. nextfat: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \ next KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-Wall -arch m68k -arch i386" "LNKFLAGS = -arch m68k -arch i386" #NeXTSTEP on Intel Platforms. next486: @echo Making C-Kermit $(CKVER) for NeXTSTEP on Intel Platforms... @echo 'If you get errors in ckutio.c about w_S, w_T, etc,' @echo 'add KFGLAGS=D-DNOREDIRECT to your make command.' $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \ -DNODEBUG -O3 -fno-omit-frame-pointer -fschedule-insns2 -pipe \ -DCK_CURSES $(KFLAGS) -w" "LIBS = -lsys_s -lcurses -ltermcap" #Single binary that runs on NeXT 68030 and 68040, Intel, HP, and Sparc, #as well as on OpenStep/Mach. nextquadfat: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-Wall -arch m68k -arch i386 -arch hppa -arch sparc" \ "LNKFLAGS = -arch m68k -arch i386 -arch hppa -arch sparc" #BeBox beboxdr7: @echo 'Making C-Kermit $(CKVER) for the BeBox...' @echo 'Link step will fail with default Metroworks linker 64K limit.' @echo 'Code Warrior Gold required to link big programs.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CC=/boot/develop/tools/mwcc" "CC2=/boot/develop/tools/mwld" \ "CFLAGS= -DBEBOX -DBE_DR_7 -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -O" #BeBox BeOS DR7 only bebox: @echo 'Making C-Kermit $(CKVER) for BeBox...' @echo 'Link step will fail with default Metroworks linker 64K limit.' @echo 'Code Warrior Pro 3.0 for BeBox required to link big programs.' $(MAKE) wermit "CC=mwcc" "CC2=mwld" KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBEBOX -DPOSIX -DNOLEARN -DNOUUCP $(KFLAGS) -O" #BeOS 4.5 #We have to use the wermit target because 'fd_set' is unknown. beos45: $(MAKE) wermit "CC=$(CC)" "CC2=$(CC2)" KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBEOS -DBEOS45 -DPOSIX -DNOIKSD -DNOREALPATH -DSYSTIMEH \ -DNOCOTFMC -DNOUUCP -DNOLEARN $(KFLAGS) -O" \ "LIBS = $(LIBS)" #BeOS 4.5 beos45net: $(MAKE) CC=$(CC) CC2=$(CC2) beos45 \ "KFLAGS=-DTCPSOCKET -DNO_DNS_SRV $(KFLAGS)" "LIBS=-lnet -lnetapi" #Plan 9 from Bell Labs plan9: @echo 'C-Kermit for Plan 9 from Bell Labs - calling ckpker.mk...' make -f ckpker.mk #POSIX posix: @echo 'Making C-Kermit $(CKVER) for pure POSIX...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -O" # PowerMAX OS (SVR4) from Concurrent (tested on PowerMAX 5.1) powermax: @echo 'Making C-Kermit $(CKVER) for Concurrent PowerMAX OS...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DPOWERMAX \ -DNETPTY -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \ -DPUSH_LDTERM -DPUSH_TTCOMPAT \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lresolv -lcurses -lgen -lc -lucbc" #Berkeley Software Design Inc. BSDI # Substitute "LIBS= -lnewcurses -ltermcap" if desired. bsdi: @echo 'Making C-Kermit $(CKVER) for BSDI ...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD44 -DSETREUID -DSW_ACC_ID -DBIGBUFOK -DFIXCRTSCTS \ -DTCPSOCKET -DCK_CURSES -DFNFLOAT $(KFLAGS) -O" \ "LIBS= -lcurses -ltermcap -lm" #Berkeley Software Design Inc. BSDI - has higher serial speeds than 1.x. bsdi2: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \ KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DBSDI2 $(KFLAGS)" bsdi3: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \ KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DBSDI2 -DBSDI3 $(KFLAGS)" bsdi4: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DBSDI2 -DBSDI3 -DBSDI4 -DTPUTSFNTYPE=void -DTPUTSISVOID \ -DCKHTTP -m486 $(KFLAGS)" # (old name for the above) bsdiposix: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi #Build a BSDI 4.x binary that also runs under FreeBSD (Terry Kennedy). #But watch out for details like serial-port locking. bsdix: $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DBSDI2 -DBSDI3 -DBSDI4 -DTPUTSFNTYPE=void -DTPUTSISVOID \ -m486 $(KFLAGS)" "LNKFLAGS=-static -Wl,-m,i386bsdi -Wl,-e,_start" #Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1 pyramid: @echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD43 -DTCPSOCKET -DPYRAMID -O $(KFLAGS)" "LNKFLAGS = -s" #Pyramid Dual Port OSx using HoneyDanBer UUCP, curses and TCP pyramid-hdb: @echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DBSD43 -DTCPSOCKET -DHBDUUCP -DCK_CURSES -O $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lcurses -ltermcap" #Pyramid DC/OSx (UNIX System V R4). #Has , regular Berkeley sockets library, i.e. in.h and inet.h #are not misplaced in sys (rather than netinet and arpa, respectively). #Uses ANSI C. #NOTE: Remove -O and Olimit:2500 from CFLAGS if TELNET connections do not work. pyrdcosx: @echo 'Making C-Kermit $(CKVER) for Pyramid DC/OSx...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -Xa -O -DSVR4 -DDIRENT -DHDBUUCP -DSELECT -DNOGETUSERSHELL \ -DCK_CURSES -DSTERMIOX -DTCPSOCKET -DPYRAMID -K Olimit:3100 \ -DNO_DNS_SRV $(KFLAGS)" "LIBS= -lcurses -lsocket -lnsl" "LNKFLAGS = -s" #IBM's AIX 3.0 on IBM 370 mainframe, tested on AIX F44 thru F50. aix370: @echo Making C-Kermit $(CKVER) for IBM System/370 AIX 3.0... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIX370 -DTCPSOCKET -DLCKDIR -DDIRENT $(KFLAGS)" \ "LIBS = -lbsd" #IBM's AIX/ESA 2.1 (OSF/1) on IBM mainframe aixesa: @echo Making C-Kermit $(CKVER) for IBM AIX/ESA... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXESA -DTCPSOCKET $(KFLAGS) -O" #IBM PS/2 with AIX 1.0 thru 1.3. # Reports indicate that -O switch must be omitted. # It is also possible that "make bsd" will work (reports welcome). # One report said "make LIBS=-lbsd bsd" did the trick. # NOTLOG is to get around a 'tlog' symbol defined in one of the headers. ps2aix: @echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DSIG_V \ -DNOUNICODE -DNOTLOG -DNOLEARN $(KFLAGS) -i" \ "LNKFLAGS = -i" ps2aixnetc: @echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DTCPSOCKET -DCK_CURSES \ -DSIG_V -DNOUNICODE -DNOTLOG -DNOLEARN $(KFLAGS) -i" \ "LIBS = -lcurses" "LNKFLAGS = -i" ps2aix3: $(MAKE) ps2aix KTARGET=$${KTARGET:-$(@)} #IBM RT PC with AIX 2.2.1, valid as of C-Kermit 8.0. #NOTLOG because of a conflict in . #This one has unique and strange lockfiles. # -O removed on purpose (8.0). # In case of "compiler error: symbol table full", increase the -Nn number. # In case of "compiler error: Constant pool too big", boost the -Np number. # Add -DNOPUTENV if putenv() causes trouble. # Put -DNOIKSD back if IKSD-related problems occur. rtaix: @echo 'Making C-Kermit $(CKVER) for IBM RT PC, AIX 2.2.1...' $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS = -DATTSV -DRTAIX -DHDBUUCP -DDIRENT -DNOTLOG -DTCPSOCKET \ -DNOGETUSERSHELL -DCLSOPN -DNOREALPATH -DNOUNICODE -DBSD_INCLUDES \ -DUSE_LSTAT -DFNFLOAT -Nn2500 -Np1000 -Wq,-SJ2 -a -w $(KFLAGS)" \ "LIBS = -lm $(LIBS)" "LNKFLAGS = -s" #### IBM RT PC - these targets were last verified in C-Kermit 8.0.211. #IBM RT PC with AIX 2.2.1 + curses rtaixc: $(MAKE) rtaix CC=$(CC) CC2=$(CC2) "KFLAGS=-DCK_CURSES" "LIBS=-lcurses" #IBM RT PC with AIX (ACIS) 2.2.1 (BSD 4.3) # Add -O, -DDYNAMIC, -s, etc, if they work. rtacis: @echo Making C-Kermit $(CKVER) for RT PC with ACIS 2.2.1 = BSD 4.3... $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \ "CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOIKSD -DNOPUTENV \ $(KFLAGS) -U__STDC__" "LNKFLAGS = -s" #### IBM AIX. The first two targets should work for any version of AIX #### from 4.2 onwards. The ones after that are for older versions or #### specific configurations, and/or with gcc. # This one should work for any AIX 4.2 or later: "make aix". # Other tags are for compatibility with old makefile targets. #OK: 2011/06/11 aix aix42 aix43 aix44 aix45 aix50 aix51 aix52 aix53 aix54 aix61: @echo Making C-Kermit $(CKVER) for IBM AIX... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \ -DSELECT -DSELECT_H -DNOGETUSERSHELL -qmaxmem=16000 -O \ -DCKCPU=\\\"`uname -p`\\\" \ -DHERALD=\"\\\" IBM AIX `uname -v`.`uname -r`\\\"\" \ -D_LARGE_FILES $(KFLAGS)" "LNKFLAGS = -s" "LIBS=-lcurses -lm" # Same but using gcc instead of cc # This works but we get "gcc: unrecognized option '-qmaxmem-..'" each module. aixg: @echo "Using gcc..." $(MAKE) aix KTARGET=$${KTARGET:-$(@)} \ CC=gcc CC2=gcc "KFLAGS=-pipe -funsigned-char" # AIX 4.2 or later with OpenSSL 0.9.7 or later: "make aix+ssl" # For earlier OpenSSL remove -DOPENSSL_097 or add "KFLAGS=-UOPENSSL_097". # Synonym target names added to cover old redundant targets that were removed. # If SSL is not installed in the /usr/local tree (see SSLINC and SSLLIB # definitions near the top), you can specify the locations in your make # command as in this example: # # SSLINC=-I/opt/ssl/include SSLLIB=-L/opt/ssl/lib make -e aix+ssl # # To build with gcc use "make aix CC=gcc CC2=gcc", or "make aixg" # #OK: 2011/06/15 aix+ssl aix51+openssl aix52+openssl aix53+openssl: @echo "Making C-Kermit $(CKVER) for IBM AIX with OpenSSL..." @echo "SSLINC=$(SSLINC) SSLLIB=$(SSLLIB)" $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ CC=$(CC) CC2=$(CC2) \ "CFLAGS=-DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \ -D_LARGE_FILES -DSELECT -DSELECT_H -DNOGETUSERSHELL \ -DCKCPU=\\\"`uname -p`\\\" \ -DHERALD=\"\\\" IBM AIX `uname -v`.`uname -r`\\\"\" \ -DCK_AUTHENTICATION -DCK_SSL -DOPENSSL_097 $(SSLINC) $(KFLAGS)" \ "LNKFLAGS=-s" "LIBS=$(SSLLIB) -lssl -lcrypto -lcurses -lm -lcrypt" # AIX 5.3 or 6.1 or later with IBM OpenSSL, which is always in the directories # shown below so you don't have to set SSLINC and SSLLIB. If for some reason # the SSL include files and libraries are not in the places assumed, then use # "make aix+ssl" (just above) and set SSLINC and SSLLIB to indicate where the # SSL files are. To build with gcc use "make aix+ibmssl CC=gcc CC2=gcc". aix+ibmssl: @echo "Making C-Kermit $(CKVER) for IBM AIX 6.1 with OpenSSL..." @echo "If this fails use 'make aix+ss' and specify SSLINC and SSLLIB" $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ CC=$(CC) CC2=$(CC2) \ "CFLAGS=-DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \ -D_LARGE_FILES -DSELECT -DSELECT_H -DNOGETUSERSHELL \ -DCKCPU=\\\"`uname -p`\\\" \ -DHERALD=\"\\\" IBM AIX `uname -v`.`uname -r`\\\"\" \ -DCK_AUTHENTICATION -DCK_SSL -DOPENSSL_098 \ -I/usr/include/openssl $(KFLAGS)" \ "LNKFLAGS=-s" \ "LIBS=-L/usr/lib/openssl -lssl -lcrypto -lcurses -lm -lcrypt" # Old AIX versions... #IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000. rs6000: @echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \ -DCK_POLL -DCLSOPN -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \ "LNKFLAGS = -s" #IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000, with curses. rs6000c: @echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \ -DCK_POLL -DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -DNOREALPATH \ -O $(KFLAGS)" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -s" aix30: $(MAKE) rs6000 CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} aix31: $(MAKE) rs6000 CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} #IBM AIX 3.2 for RISC System/6000. #In case of "subprogram too complex" warnings, add "-qmaxmem=16000" to CFLAGS. rs6aix32: @echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \ -DSELECT_H -DCLSOPN -DNOTTYLOCK -O $(KFLAGS)" "LNKFLAGS = -s" #IBM AIX 3.2 for RISC System/6000. rs6aix32c: @echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000, TCP+curses... @echo In case of Subprogram Too Complex warnings, @echo add -qmaxmem=16000 to CFLAGS. $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \ -DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS=-lcurses" aix32: $(MAKE) rs6aix32c KTARGET=$${KTARGET:-$(@)} #IBM AIX 4.1, 4.1.x on RISC System/6000 or Power Series. #Generates common binary for all platforms if using xlc (IBM C compiler). #When using gcc, add -mcpu=common to generate common binary. #Note that this one needs CK_NEWTERM. # Add -bbigtoc in case ld fails with TOC overflow. aix41: @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \ -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS=-lcurses" #Ditto but with gcc. #Remove "CC=gcc CC2=gcc" if you have gcc installed as cc. aix41g: @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \ "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \ -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -O $(KFLAGS)" \ "LNKFLAGS = -s -Xlinker -bbigtoc" "LIBS=-lcurses" # Add -bbigtoc in case ld fails with TOC overflow. aix41+krb5+krb4: @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \ -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_DES $(K5INC) $(K5INC)/krb5 \ -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \ "LNKFLAGS = -s" \ "LIBS = $(K5LIB) -lcurses -lkrb4 -ldes425 -lkrb5 \ -lcom_err -lk5crypto -lgssapi_krb5" #Old name for "aix41". rs6aix41c: $(MAKE) aix41 KTARGET=$${KTARGET:-$(@)} #IBM AIX 4.1, 4.1.x, or 4.2 on RISC System/6000 or Power Series, # with X.25 support #Generates common binary for all platforms if using xlc (IBM C compiler). #When using gcc, add -mcpu=common to generate common binary. # Add -bbigtoc in case ld fails with TOC overflow. aix41x25: @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \ -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \ -DIBMX25 -DDEBUG -DNOGETUSERSHELL -qmaxmem=16000 -g $(KFLAGS)" \ "LNKFLAGS = -g -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg" -@echo "]0;kermit done\c" #As above but without -g in LNKFLAGS. # Add -bbigtoc in case ld fails with TOC overflow. aix41x25o: @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \ -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \ -DIBMX25 -DNODEBUG -DNOGETUSERSHELL -qmaxmem=16000 $(KFLAGS)" \ "LNKFLAGS = -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg" -@echo "]0;kermit done\c" #AIX 4.2 -- Use this target if the regular "make aix" doesn't work. # Must have CK_NEWTERM or echoing is lost after curses. # Add -bbigtoc in case ld fails with TOC overflow. As of C-Kermit 8.0.212, # all AIX builds 4.2 and later include large file support. oldaix42: @echo Making C-Kermit $(CKVER) for IBM AIX 4.2 or higher... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \ -DSELECT -DSELECT_H -DNOGETUSERSHELL -qmaxmem=16000 -O \ -DCKCPU=\\\"`uname -p`\\\" \ -DHERALD=\\\"\ IBM\ AIX\ `uname -v`.`uname -r`\\\" \ -D_LARGE_FILES $(KFLAGS)" "LNKFLAGS = -s" "LIBS=-lcurses -lm" #AIX 4.3 - Use this target if the regular "make aix" doesn't work. # Must NOT have CK_NEWTERM or else C-Kermit hangs after curses. # -bbigtoc needed on some systems but not others to avoid TOC overflow. # "man ld" says -bbigtoc makes program run slower. oldaix43: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DAIX43 -DSVR4 -DSTERMIOX -DTCPSOCKET \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DFNFLOAT -DNOGETUSERSHELL -qmaxmem=16000 -bbigtoc -O $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS=-lcurses -lm" #AIX 4.3 with IBM X.25. aix43x25: @echo "Making C-Kermit $(CKVER) for IBM AIX 4.3 with X.25..." $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DAIXRS -DAIX41 -DAIX43 -DSVR4 -DSTERMIOX -DTCPSOCKET \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DFNFLOAT -DNOGETUSERSHELL -DIBMX25 \ -qmaxmem=16000 -bbigtoc -O $(KFLAGS)" \ "LNKFLAGS = -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg -lm" #AIX 4.3 -- Must NOT have CK_NEWTERM or else C-Kermit hangs after curses. # -mminimal-toc needed on some systems but not others to avoid TOC overflow. # "man ld" says -bbigtoc makes program run slower. aix43g: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \ "LIBS=-lcurses -lm" aix43gcc: $(MAKE) aix43g # None of the following aix43gcc attempts work on a gcc-only AIX 4.3.3 box. # It just plain can't find the math routines (fmod, pow, exp, sqrt, log10,...) # Which is odd because nm /usr/lib/libC.a finds them... #in case aix43gcc can't find its math library... aix43gccx: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \ "LIBS= -L/usr/local/lib/gcc-lib/powerpc-ibm-aix4.3.1.0/2.95.2 \ -lcurses -bloadmap -bnoquiet" #in case aix43gccx can't find its math library... aix43gccy: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \ "LIBS= -lcurses -bloadmap -bnoquiet" #in case aix43gccx can't find its math library... aix43gccz: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \ "LIBS= -L. -lcurses -bloadmap -bnoquiet" #AIX 4.3 with MIT Kerberos 5 and Kerberos 4 compatibility mode # Must NOT have CK_NEWTERM or else C-Kermit hangs after curses. # -mminimal-toc needed on some systems but not others to avoid TOC overflow. # "man ld" says -bbigtoc makes program run slower. aix43gcc+krb5+krb4: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/Kerberos... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_DES -funsigned-char $(K5INC) $(K5INC)/krb5 \ $(KFLAGS)" \ "LIBS=$(K5LIB) -lcurses -lm -lkrb4 -ldes425 -lkrb5 \ -lcom_err -lk5crypto -lcrypt -lgssapi_krb5" #AIX 4.3 with MIT Kerberos 5, Kerberos 4 compatibility mode and OpenSSL # Must NOT have CK_NEWTERM or else C-Kermit hangs after curses. # -mminimal-toc needed on some systems but not others to avoid TOC overflow. # "man ld" says -bbigtoc makes program run slower. aix43gcc+krb5+krb4+openssl: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/Kerberos... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DLIBDES -DCK_SSL \ -funsigned-char $(K5INC) $(K5INC)/krb5 $(SSLINC) $(KFLAGS)" \ "LIBS=$(K5LIB) $(SSLLIB) -lssl -lcrypto \ -lcurses -lm -lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt \ -lgssapi_krb5" aix43gcc+openssl: @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/OpenSSL... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \ -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \ -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \ -DCK_AUTHENTICATION -DCK_SSL -funsigned-char $(SSLINC) $(KFLAGS)" \ "LIBS=$(SSLLIB) -lssl -lcrypto -lcurses -lm -lcrypt" aix44gcc: $(MAKE) aix43g "KFLAGS=-DAIX44 $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} aix45gcc: $(MAKE) aix43g "KFLAGS=-DAIX45 $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} aix50gcc: $(MAKE) aix43g "KFLAGS=-DAIX50 $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} aix51gcc: $(MAKE) aix43g "KFLAGS=-DAIX51 $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} aix52gcc: $(MAKE) aix43g "KFLAGS=-DAIX52 $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} aix53gcc: $(MAKE) aix43g "KFLAGS=-DAIX53 $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} #Bull DPX/2 with BOS/X, like AIX/RS6000 bulldpx2: @echo Making C-Kermit $(CKVER) for Bull DPX/2 with BOS/X... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSVR3 -DDIRENT -DCK_ANSIC -DCKTYP_H= \ -DCK_POLL -DNOGETUSERSHELL -DCLSOPN -DNOLEARN -O $(KFLAGS)" \ "LNKFLAGS = -s" #Sun UNIX 3.5 with gcc 2.3.3. sunos3gcc: @echo Making C-Kermit $(CKVER) for Sun UNIX 3.5 and gcc... $(MAKE) xermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \ CFLAGS="-g -O -DBSD4 -DTCPSOCKET $(KFLAGS)" #SunOS version 4.0, BSD environment, has saved original euid feature. # Add "CC=/usr/ucb/cc CC2=/usr/ucb/cc" if necessary. # Note: Including Unicode crashes the assembler in ckcuni.c. sunos4: @echo Making C-Kermit $(CKVER) for SunOS 4.0, BSD environment... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DSUNOS4 -DFNFLOAT -DNOUNICODE $(KFLAGS)" \ "LIBS=-lm" #As above, but with SunLink X.25 support sunos4x25: @echo SunLink X.25 support $(MAKE) "MAKE=$(MAKE)" sunos4 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DFNFLOAT -DSUNX25" \ "LIBS=-lm" #SUN OS version 4.1 - 4.1.3, BSD environment, has saved original euid feature. #Uses Honey DanBer UUCP. Requires presence of /usr/spool/locks directory. # /var/spool/ should be a symbolic link to /usr/spool/. # ... or 'make xermit "CC= /usr/ucb/cc " \' # Note: "xermit" means use the select() version of the CONNECT module. # Note for C-Kermit 9.0: Reportedly 'you need to modify the sys/ioctl.h # include file, i.e. comment out the "struct winsize" and "struct # ttysize". Otherwise there will be a conflict with sys/ttycom.h (included by # termios.h) which also declares these structs. But you need both includes.' sunos41: @echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE $(KFLAGS)" \ "LIBS= $(LIBS) -lresolv -lm" #As above, but compiled with gcc. Gives 24-32K size reduction #with gcc 2.1 or 2.2.2. CAUTION: make sure "fixincludes" has been run on #the include files, so gcc's are in sync with the regular Sun ones. #This includes the curses library for fullscreen file transfer display. #NDGPWNAM needed for GCC 2.5.6, not needed for 2.4.0, but it's uncertain #whether it will do any harm for 2.4.0 compilation -- if so, remove it. sunos41gcc: @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -funsigned-char $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm" # As above, but without -funsigned-char so I can see the warnings that # everybody else will get when they use ANSI compilers that don't have this # option (gsc = gcc signed char). sunos41gsc: @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm" #As above but with ckucon.c rather than ckucns.c (for testing only) sunos41gccfork: @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -DNOLEARN -funsigned-char $(KFLAGS)" \ "LIBS= -lcurses -ltermcap -lresolv -lm" #as above but configured for Kerberos IV sunos41gcc+krb4: @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -DTCPSOCKET -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 \ -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DBIGBUFOK -funsigned-char \ $(K4INC) $(KFLAGS)" \ "LIBS= $(K4LIB) -lcurses -ltermcap -lresolv -lm -lkrb -ldes" #as above but configured for SSL/TLS sunos41gcc+openssl: @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, ssl... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -DCK_AUTHENTICATION -funsigned-char \ -DCK_SSL -DTCPSOCKET -DBIGBUFOK $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -lcurses -ltermcap -lresolv -lm -lssl -lcrypto" #as above but configured for Kerberos IV and SSL/TLS sunos41gcc+krb4+openssl: @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \ -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \ $(K4INC) $(SSLINC) $(KFLAGS)" \ "LIBS= $(K4LIB) $(SSLLIB) \ -lcurses -ltermcap -lresolv -lm -lkrb -lssl -lcrypto" #as above but configured for Kerberos IV and ZLIB enabled SSL/TLS sunos41gcc+krb4+openssl+zlib: @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \ -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \ -DZLIB $(K4INC) $(SSLINC) \ $(KFLAGS)" \ "LIBS= $(K4LIB) $(SSLLIB) \ -lcurses -ltermcap -lresolv -lm -lkrb -lssl -lcrypto -lz" #as above but configured for Kerberos IV and SRP and ZLIB enabled SSL/TLS sunos41gcc+krb4+srp+openssl+zlib: @echo "C-Kermit $(CKVER) SunOS 4.1: gcc,curses,krb4,srp,ssl,zlib..." $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \ -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \ -DZLIB -DCK_SRP $(K4INC) $(SRPINC) $(SSLINC) $(KFLAGS)" \ "LIBS= $(K4LIB) $(SRPLIB) $(SSLLIB) \ -lcurses -ltermcap -lresolv -lm -lkrb -lkrypto \ -lsrp -lssl -lcrypto -lz" #as above but configured for Kerberos IV and SRP and ZLIB enabled SSL/TLS sunos41gcc+srp+openssl+zlib: @echo "C-Kermit $(CKVER) SunOS 4.1: gcc,curses,srp,ssl,zlib..." $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \ -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_DES \ -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \ -DZLIB -DCK_SRP $(SRPINC) $(SSLINC) \ $(KFLAGS)" \ "LIBS= $(SRPLIB) $(SSLLIB) \ -lcurses -ltermcap -lresolv -lm -lkrypto -lsrp -lssl -lcrypto -lz " #SUNOS 4.1 as sunos41 above, but also with curses support sunos41c: @echo Curses support $(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DCK_CURSES -DFNFLOAT " \ "LIBS= -lcurses -ltermcap" #As SunOS 4.1.x, gcc, configured as Internet Kermit Server. # . NOLOCAL removes capability to make connections # . TNCODE allows server-side Telnet negotiation. # . used to include -lpwent, why? # . used to include -L/usr/local/lib -lm, why? sunos41giks: @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc for IKS... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \ "CFLAGS= -O -DSUNOS41 -DNDGPWNAM -DFNFLOAT \ -DNOLOCAL -DTCPSOCKET -DTNCODE -DNOPUSH $(KFLAGS)" \ "LIBS= -lm -lresolv" #SUNOS 4.1 with SunLink X.25 support sunos41x25: @echo SunLink X.25 support $(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \ -DNOLEARN $(KFLAGS)" "LIBS= $(LIBS) -lresolv -lm" #SUNOS 4.1 with SunLink X.25 support and curses sunos41x25c: @echo SunLink X.25 support + curses $(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \ -DCK_CURSES -DNOLEARN $(KFLAGS)" \ "LIBS= $(LIBS) -lcurses -ltermcap -lresolv -lm" #SUN with Solaris 2.0 = SunOS 5.0. #Mostly the same as System V R4. Don't use this with later Solaris versions. solaris20: @echo 'Making C-Kermit $(CKVER) for Sun with Solaris 2.0 and curses...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \ -DTCPSOCKET -DCK_CURSES -DFNFLOAT -DCK_POLL $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s" #SUN with Solaris 2.0. #As above, but built with the gcc compiler from the Cygnus CD-ROM. solaris20g: @echo 'Making C-Kermit $(CKVER) for Sun Solaris 2.0, gcc, and curses..' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \ -DTCPSOCKET -DCK_CURSES -DCK_POLL -DFNFLOAT $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s" \ CC=/opt/cygnus-sol2-1.1/bin/gcc CC2=/opt/cygnus-sol2-1.1/bin/gcc #SunOS 5.1 = Solaris 2.1. #NOTE: A C compiler is no longer bundled with SunOS 5.1, so to compile C #programs, you might have to change your PATH to include the directory #/usr/ccs/bin AFTER the directory containing the compiler. SunPRO C is #installed by default in /opt/SUNWspro/bin. So a sample PATH might be: # # /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\ # /usr/ucb:/usr/sbin:/sbin:. # # or: # # /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin. # #NOTE 2: Compilation with the Apogee C compiler (apcc) might not work, #because it refuses to allow "-Usun". Reportedly, newer releases of apcc #(such as 1.2.17) work OK, use: "make -e sunos51 CC=apcc CC2=apcc". solaris21: @echo 'Making C-Kermit $(CKVER) for SunOS 5.x....' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -Usun -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DFNFLOAT \ -DSELECT -DNODEBUG -DSTERMIOX $(KFLAGS)" "LIBS = -lm" "LNKFLAGS = -s" #Solaris 2.0 - 2.4, SunPro compiler, includes curses and TCP/IP. #When using SUNWspro CC 2.0.1 under Solaris 2.3, be sure all cc patches #are applied, otherwise corrupt or truncated object files can result. #To build, set your PATH as follows: # /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\ # /usr/ucb:/usr/sbin:/sbin:. # or (depending on where the compiler has been installed): # /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin. #For additional optimization try using "-fast -xO4 -xdepend". solaris2x: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -Usun -i -DSVR4 -DDIRENT -DSOLARIS -DHDBUUCP -DFNFLOAT \ -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv" #as above but configured for Kerberos IV solaris2x+krb4: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x, SunPro cc, krb4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -Usun -i -DSVR4 -DDIRENT -DSOLARIS -DHDBUUCP -DFNFLOAT \ -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX -DTCPSOCKET \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 \ -DCK_ENCRYPTION -DCK_DES -DCK_CAST $(K4INC) $(KFLAGS)" \ "LNKFLAGS = -s" \ "LIBS= $(K4LIB) -ltermlib -lsocket -lnsl -lm -lresolv -lkrb -ldes" #C-Kermit for Solaris 2.0-2.4 compiled with gcc, includes curses and TCP/IP. #Change -O2 to -O if -O2 gives trouble. #Remove -Usun if it causes trouble. #Your PATH should start with something like: # /usr/local/gnu/bin:/usr/ccs/bin: #Produces a huge executable -- strip with /usr/ccs/bin/strip (not Gnu strip). #Also don't add "LNKFLAGS = -s" -- strip manually instead. #Also note: this can NOT be linked statically - Sun makes it impossible. #And for Solaris 2.4, you might have to replace: # /usr/local/lib/gcc-lib/i486-sun-solaris2/2.4.5/include/sys/stat.h #with /usr/include/sys/stat.h. solaris2xg: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \ "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv $(LIBS)" #ditto but no curses. solaris2xgnc: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lm -lresolv $(LIBS)" #and with Kerberos IV solaris2xg+krb4: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc, krb4...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION \ -DCK_DES -DCK_CAST -DBIGBUFOK $(K4INC) $(KFLAGS)" \ "LIBS= $(K4LIB) -ltermlib -lsocket -lnsl -lm -lresolv -lkrb -ldes \ $(LIBS)" #and with OpenSSL,ZLIB,PAM,SHADOW solaris2xg+openssl+zlib+pam+shadow: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB \ -DBIGBUFOK $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -ltermlib \ -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz" #Ditto but with GCC 3.1 in which you have to specify 32-bit with -m32. #In Solaris 9 (and maybe 8) you'll also need specifiy the Library path. #Reportedly this can be done here, but only with: # crle -l /usr/lib:/usr/local/ssl/lib #prior to building. Note: 64-bit not tested with SSL. #For no-crypto 64-bit builds see the solaris9g64 target. solaris2xg32+openssl+zlib+pam+shadow: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC="gcc -m32" CC2="gcc -m32" \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB \ -DBIGBUFOK $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -ltermlib \ -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz" #and with Krb5,Krb4,OpenSSL,SHADOW solaris2xg+krb5+krb4+openssl+shadow: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc,k5,k4,ssl...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_SSL -DCK_DES -DCK_CAST -DBIGBUFOK \ $(K5INC) $(K5INC)/krb5 $(SSLINC) $(KFLAGS)" \ "LIBS= $(K5LIB) $(SSLLIB) -ltermlib -lsocket -lnsl -lm -lresolv \ -lkrb4 -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto \ -ldes $(LIBS)" #and with OpenSSL solaris2xg+openssl+pam+shadow: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW \ -DBIGBUFOK $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -ltermlib \ -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam" solaris2xg+openssl+zlib+srp+pam+shadow: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...' @echo 'Please read the comments that accompany the solaris2xg target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DBIGBUFOK \ -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_DES -DLIBDES -DCK_CAST \ -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB -DCK_SRP $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -ltermlib -lsocket -lnsl -lm -lresolv -lsrp -lssl \ -ldes -lkrypto -lcrypto -lpam -lz" solaris22g: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DPOSIX_CRTSCTS $(KFLAGS)" solaris2xg \ KTARGET=$${KTARGET:-$(@)} solaris23g: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DPOSIX_CRTSCTS $(KFLAGS)" solaris2xg \ KTARGET=$${KTARGET:-$(@)} #Solaris 2.4 built with gcc solaris24g: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} \ solaris2xg "KFLAGS=-DSOLARIS24 -DPOSIX_CRTSCTS $(KFLAGS)" #Solaris 2.0-2.3, SunPro compiler, with SunLink X.25 support. #This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1 #exists and can be dynamically linked. #NOTE: Do not change target to xermit -- it doesn't support X.25. solaris2x25: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x+X.25 with SunPro cc...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DDIRENT \ -DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT -DNOLEARN \ -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \ "LNKFLAGS = -s" \ "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \ -lsockx25 -lsocket -lnsl -lm -lresolv" #Solaris 2.0-2.4, gcc, SunLink X.25 added. #NOTE: Can't use xermit target with X.25. solaris2xgx25: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x + X.25 with GNU cc...' @echo 'Please read the comments that accompany the solaris2xg entry.' $(MAKE) wermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DSUNX25 \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DFNFLOAT \ -DNOLEARN $(KFLAGS)" \ "LIBS= -ltermlib -lm -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \ -lsockx25 -lsocket -lnsl" #Solaris 2.4, SunPro compiler, with SunLink X.25 support. #This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1 #exists and can be dynamically linked. solaris24x25: @echo 'Making C-Kermit $(CKVER) for Solaris 2.4+X.25 with SunPro cc...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DSOLARIS24 -DDIRENT -DNOLEARN \ -DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT -DPOSIX_CRTSCTS \ -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \ "LNKFLAGS = -s" \ "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \ -lsockx25 -lsocket -lnsl -lm -lresolv" #Solaris 2.5, SunPro compiler, with SunLink X.25 support. solaris25x25: @echo 'Making C-Kermit $(CKVER) for Solaris 2.5+X.25 with SunPro cc...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS25 -DDIRENT -DSUNX25 \ -DTCPSOCKET -DHDBUUCP -DSELECT -DCK_CURSES \ -DCK_NEWTERM -DSTERMIOX -DFNFLOAT -DPOSIX_CRTSCTS -DNOLEARN \ -I/opt/SUNWconn/include $(KFLAGS)" \ "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \ -lsockx25 -lsocket -lnsl -lm -lresolv" solaris23: $(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS)" solaris24: $(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS24 -DPOSIX_CRTSCTS $(KFLAGS)" # template for Solaris 2.5 and above. solaris25x: @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DFNFLOAT -O -Usun -i $(KFLAGS)" \ "LNKFLAGS = -s" \ "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv $(LIBS)" #Solaris 2.5, SunPro compiler, curses, TCP/IP solaris25: $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS25 $(KFLAGS)" #Solaris 2.5, SunPro compiler, curses, TCP/IP, Kerberos IV solaris25+krb4: $(MAKE) "MAKE=$(MAKE)" solaris25x+krb4 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS25 $(KFLAGS)" #Solaris 2.5 built with gcc solaris25g: $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)" #Solaris 2.5 built with gcc and Kerberos IV solaris25g+krb4: $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)" #Solaris 2.5 built with gcc and Kerberos V/IV, SSL, ... solaris25g+krb5+krb4+openssl+shadow: $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb5+krb4+openssl+shadow \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)" #Solaris 2.5, gcc, SunLink X.25 added. solaris25gx25: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgx25 \ "KFLAGS=-DSOLARIS25 $(KFLAGS)" #Solaris 2.6, gcc, SunLink X.25 added. solaris26gx25: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgx25 \ "KFLAGS=-DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" #Solaris 2.6, SunPro compiler, curses, TCP/IP solaris26: $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" #Solaris 2.6 with gcc solaris26g: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xg \ "KFLAGS= -DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS = -lpam" #Solaris 2.6 with gcc and SSL solaris26g+openssl: $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+pam+shadow \ KTARGET=$${KTARGET:-$(@)} "KFLAGS= -DSOLARIS26 $(KFLAGS)" #Solaris 2.6 with gcc, no curses (e.g. because libtermlib is missing). solaris26gnc: $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgnc \ "KFLAGS= -DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" #Solaris 2.6, SunPro compiler, with SunLink X.25 support. solaris26x25: @echo 'Making C-Kermit $(CKVER) for Solaris 2.6+X.25 with SunPro cc...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS26 -DDIRENT -DSUNX25 \ -DTCPSOCKET -DHDBUUCP -DSELECT -DCK_CURSES -DCK_PAM -DCK_SHADOW \ -DCK_NEWTERM -DSTERMIOX -DFNFLOAT -DPOSIX_CRTSCTS -DNOLEARN \ -I/opt/SUNWconn/include $(KFLAGS)" \ "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \ -lsockx25 -lsocket -lnsl -lm -lresolv -lpam" #Solaris 7 (2.7) with Sun CC solaris7: $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" #Solaris 7 with gcc (32-bit) solaris7g: $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" #Solaris 7 with gcc + Kerberos IV (32-bit) solaris7g+krb4: $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" solaris7g+openssl+zlib+pam+shadow: $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" #Solaris 7 with gcc + OpenSSL (32-bit) solaris7g+openssl+zlib+srp+pam+shadow: $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+srp+pam+shadow \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" #Solaris 8 solaris8: $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" #Solaris 8 with gcc (32-bit) solaris8g: $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" # In OpenSSL builds add -ldl if you get unresolved references for # dlclose, dlsym, dlopen, dlerror. #Solaris 8 with gcc + OpenSSL (32-bit) solaris8g+openssl+zlib+pam+shadow: $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \ KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSOLARIS8 $(KFLAGS)" #Solaris 8 with gcc + Kerberos IV (32-bit) solaris8g+krb4: $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \ "LIBS= -lpam" solaris9nolfs: $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS9 -DCK_PAM -DCK_SHADOW -DUSE_STRERROR $(KFLAGS)" \ "LIBS= -lpam" #Solaris 9 with malloc debugging solaris9md: $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DFNFLOAT -O -Usun -i -D_FILE_OFFSET_BITS=64 \ -DSOLARIS9 -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG \ -DCK_PAM -DCK_SHADOW -DUSE_STRERROR $(KFLAGS)" \ "LIBS= -lpam -ltermlib -lsocket -lnsl -lm -lresolv" #Solaris 9 with gcc + OpenSSL + Shadow (32-bit) #Add -DOPENSSL_097 for OpenSSL 0.9.7 or later. solaris9g+openssl+shadow+pam+zlib: $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS9 -DHDBUUCP -DDIRENT -D_FILE_OFFSET_BITS=64 \ -DNO_DCL_INET_ATON -DZLIB -DCK_PAM -DCK_SHADOW -DLIBDES $(KFLAGS)" \ "LIBS= -lpam -ldes425 -lz $(LIBS)" #Solaris 9 with gcc + OpenSSL + Kerberos 5 + Krb4 + Shadow (32-bit) #Add -DOPENSSL_097 for OpenSSL 0.9.7 or later. solaris9g+krb5+krb4+openssl+shadow+pam+zlib: $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb5+krb4+openssl+shadow \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS9 -DHDBUUCP -DDIRENT -D_FILE_OFFSET_BITS=64 \ -DNO_DCL_INET_ATON -DZLIB -DCK_PAM -DCK_SHADOW -DLIBDES $(KFLAGS)" \ "LIBS= -lpam -ldes -lz $(LIBS)" #Solaris 9 with gcc + Kerberos 4 and 5: solaris9g+krb5+krb4: $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -O -Usun -DSVR4 -DSOLARIS9 -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -D_FILE_OFFSET_BITS=64 \ -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DBIGBUFOK \ $(K5INC) $(K5INC)/krb5 $(KFLAGS)" \ "LIBS= $(K5LIB) -ltermlib -lsocket -lnsl -lm -lresolv \ -lkrb4 -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto \ -ldes $(LIBS)" #Solaris 9, 10, or 11 with gcc... #Uses streams PTYs rather than BSD ptys as in C-Kermit 8.0 and earlier. #This target is chained to be the secure solaris9g+xxx targets below. solaris9g solaris10g solaris11g: @echo 'Making C-Kermit $(CKVER) for Solaris 9 or later with gcc' @case `uname -r` in \ 5.9) SOLARISVERSION="-DSOLARIS9" ;; \ 5.10) SOLARISVERSION="-DSOLARIS10" ;; \ 5.11) SOLARISVERSION="-DSOLARIS11" ;; \ *) SOLARISVERSION="-DSOLARIS" ;; \ esac ; \ $(MAKE) "MAKE=$(MAKE)" CC="gcc -m32" CC2="gcc -m32" xermit \ KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -g -O -Usun -DSVR4 $$SOLARISVERSION -DUSE_STRERROR \ -DSTERMIOX -DSELECT -DFNFLOAT -DCK_PAM -DCK_SHADOW -funsigned-char \ -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \ -DPUSH_LDTERM -DPUSH_TTCOMPAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -D_FILE_OFFSET_BITS=64 $(KFLAGS)" \ "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv -lpam $(LIBS)" #Solaris 9, 10, or 11 with gcc + Kerberos 5 + OpenSSL. #OK C-Kermit 9.0.301. solaris9g+krb5+ssl solaris10g+krb5+ssl solaris11g+krb5+ssl: @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac ; \ HAVE_DES=''; \ DES_LIB=''; \ if ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes425'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ GSSAPILIB=''; \ K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \ echo K5DIR=$$K5DIR; \ if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \ GSSAPILIB='-lgssapi_krb5'; \ else GSSAPILIB='-lgssapi'; \ fi; \ $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -O -Usun -DSVR4 -DSOLARIS9 -DSTERMIOX -DSELECT -DFNFLOAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DBIGBUFOK \ -DCK_AUTHENTICATION -DCK_SSL -DZLIB -DCK_KERBEROS -DKRB5 \ -DCK_ENCRYPTION -DCK_CAST $$OPENSSLOPTION \ $$HAVE_DES $(SSLINC) $(K5INC) $(K5INC)/krb5 $(KFLAGS)" \ "LIBS= $(SSLLIB) $(K5LIB) -lz -lssl -ltermlib -lsocket -lnsl -lm \ -lresolv -lcrypto \ $$GSSAPILIB -lkrb5 -lcom_err -lk5crypto $$DES_LIB $(LIBS)" #Solaris 9, 10, or 11 with gcc, 64 bit build. #Peeking inside FILE struct not allowed in 64-bit world. #DON'T USE THIS ONE ON PC ARCHITECTURE - It compiles and links but won't run. #OK: 2009/09/25 (but not tested on Solaris 11) solaris9g64 solaris10g64 solaris11g64: @echo 'Making C-Kermit $(CKVER) for Solaris 9++ with gcc 64-bit' @case `uname -r` in \ 5.9) SOLARISVERSION="-DSOLARIS9" ;; \ 5.10) SOLARISVERSION="-DSOLARIS10" ;; \ 5.11) SOLARISVERSION="-DSOLARIS11" ;; \ *) SOLARISVERSION="-DSOLARIS" ;; \ esac ; \ $(MAKE) "MAKE=$(MAKE)" CC="gcc -m64" CC2="gcc -m64" xermit \ KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -g -O -Usun -funsigned-char \ -DSVR4 $$SOLARISVERSION -DNOARROWKEYS \ -DSTERMIOX -DSELECT -DFNFLOAT -DUSE_STRERROR -DCK_PAM -DCK_SHADOW \ -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \ -DPUSH_LDTERM -DPUSH_TTCOMPAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \ "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv -lpam $(LIBS)" #Solaris 9, 10, or 11 with SunPro CC #Uses streams PTYs rather than BSD ptys as in C-Kermit 8.0 and earlier. #This target is chained to by the secure targets below. #OK C-Kermit 9.0 solaris9 solaris10 solaris11: @echo 'Making C-Kermit $(CKVER) for Solaris 9 or later with Sun CC' @case `uname -r` in \ 5.9) SOLARISVERSION="-DSOLARIS9" ;; \ 5.10) SOLARISVERSION="-DSOLARIS10" ;; \ 5.11) SOLARISVERSION="-DSOLARIS11" ;; \ *) SOLARISVERSION="-DSOLARIS" ;; \ esac ; \ $(MAKE) "MAKE=$(MAKE)" xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -Usun -DSVR4 $$SOLARISVERSION -DUSE_STRERROR \ -DSTERMIOX -DSELECT -DFNFLOAT -DCK_PAM -DCK_SHADOW \ -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \ -DPUSH_LDTERM -DPUSH_TTCOMPAT \ -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \ -D_FILE_OFFSET_BITS=64 $(KFLAGS)" \ "LIBS= $(LIBS) -ltermlib -lsocket -lnsl -lm -lresolv -lpam" # Solaris 9, 10, or 11 with OpenSSL built with Sun CC. # Here's an example of how to invoke this target in case your OpenSSL # headers and libraries are not in /usr/local: # # make solaris9+openssl "SSLINC=" "SSLLIB=" \ # "KFLAGS= -I/opt/openssl-0.9.8k/include -L/opt/openssl-0.9.8k/lib" # # Don't use 'make -e' because that inhibits passing of KFLAGS to # the base (solaris9) target. # #OK C-Kermit 9.0 solaris9+ssl solaris10+ssl solaris11+ssl \ solaris9+openssl solaris10+openssl solaris11+openssl: @echo 'Making C-Kermit $(CKVER) for Solaris 9/10/11 with OpenSSL: cc' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac ; \ HAVE_DES=''; \ DES_LIB=''; \ if ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes425'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ $(MAKE) "MAKE=$(MAKE)" solaris9 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DCK_AUTHENTICATION -DCK_SSL -DZLIB $$HAVE_DES \ -DNO_DCL_INET_ATON $$OPENSSLOPTION $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -lz -lssl $$DES_LIB -lcrypto $(LIBS)" # Solaris 9 or later with OpenSSL, built with gcc. # Remove -DNO_DCL_INET_ATON if inet_aton comes up missing. This target nicely # chains to the solaris{9,10,11}g target but for some reason it doesn't work if # you add the -DFORWARD_X option, thus the solaris9g+openssl+forward_x target. # #OK: 2011/06/14 solaris9g+ssl solaris10g+ssl solaris11g+ssl \ solaris9g+openssl solaris10g+openssl solaris11g+openssl: @echo 'Making C-Kermit $(CKVER) for Solaris 9/10/11 with OpenSSL: gcc' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac ; \ HAVE_DES=''; \ DES_LIB=''; \ if ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes425'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ $(MAKE) "MAKE=$(MAKE)" solaris9g KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DCK_AUTHENTICATION -DCK_SSL -DZLIB $$HAVE_DES \ -DNO_DCL_INET_ATON $$OPENSSLOPTION $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -lz -lssl $$DES_LIB -lcrypto $(LIBS)" # Solaris 9 or later with gcc + OpenSSL + Shadow (32-bit). # Remove -DNO_DCL_INET_ATON if inet_aton comes up missing. # Includes long file support - not sure if this was available before Solaris 9. # Detects Solaris version automatically. # solaris9g+openssl+forward_x: @echo 'Making C-Kermit $(CKVER) for Solaris 9 or later with OpenSSL...' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac ; case `uname -r` in \ 5.9) SOLARISVERSION="-DSOLARIS9" ;; \ 5.10) SOLARISVERSION="-DSOLARIS10" ;; \ 5.11) SOLARISVERSION="-DSOLARIS11" ;; \ *) SOLARISVERSION="-DSOLARIS" ;; \ esac ; \ $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "CFLAGS = -g -O -Usun -DSVR4 $$SOLARISVERSION \ -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \ -DPUSH_LDTERM -DPUSH_TTCOMPAT \ -DSTERMIOX -DSELECT -DFNFLOAT -DBIGBUFOK -D_FILE_OFFSET_BITS=64 \ -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB -DLIBDES \ -DFORWARD_X $$OPENSSLOPTION $(SSLINC) $(KFLAGS)" \ "LIBS= $(SSLLIB) -lpam -ldes425 -lz -ltermlib \ -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz $(LIBS)" # These two should be folded in with the ones just above. #Solaris 9 with gcc 3.1 + OpenSSL (32-bit) solaris9g+openssl+zlib+pam+shadow: $(MAKE) "MAKE=$(MAKE)" solaris2xg32+openssl+zlib+pam+shadow \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS9 -DUSE_STRERROR $(KFLAGS)" #Solaris 10 with gcc 3.1 + OpenSSL (32-bit) solaris10g+openssl+zlib+pam+shadow: $(MAKE) "MAKE=$(MAKE)" solaris2xg32+openssl+zlib+pam+shadow \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSOLARIS10 -DUSE_STRERROR $(KFLAGS)" #The following (old, old) sunosxxx entries are for debugging and testing only. sunos41x: $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DSUNOS41 -DDIRENT -DNOTLOG -DNOMSEND \ -DNOUUCP -DNOSIGWINCH -DNOREDIRECT -DNOPUSH -DNOCCTRAP \ -DNOICP -DNOLOCAL $(KFLAGS)" #SunOS 4.1.x, debugging with Pure Software, Inc., Purify 2 (commercial runtime #error-detection software for catching wild array references, etc). #Before running the resulting wermit, you'll also need to define and export #the following environment variables (as in this example): #PURIFYHOME=/usr/local/purify ; export PURIFYHOME #PURIFYCACHEDIR=/tmp ; export PURIFYCACHEDIR sunos41cp: @echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD / Curses / Purify... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CC2= purify -cache_dir=/usr/tmp cc" \ "CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \ -DSAVEDUID -DCK_CURSES $(KFLAGS)" \ "LIBS= -lcurses -ltermcap" #SunOS 4.1 with malloc debugger sunos41md: @echo Making C-Kermit $(CKVER) for SunOS 4.1 malloc debug... $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \ -DSAVEDUID $(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" sunos41gmd: @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses... $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \ "CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \ -DNDGPWNAM -DSAVEDUID -DCK_CURSES -DRLOGCODE \ $(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \ "LIBS= -lcurses -ltermcap" #SunOS version 4.1, gcc, profiling with gprof, no debugging. #To get profile, "make sunos41p" (on Sun), then "./wermit". After running #wermit, "gprof ./wermit | lpr" (or whatever) to get execution profile. sunos41p: @echo Making C-Kermit $(CKVER) for SunOS 4.x with profiling... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \ "CFLAGS= -DSUNOS41 -DNODEBUG -DSAVEDUID -DDIRENT -DTCPSOCKET \ -DNDGPWNAM $(KFLAGS) -pg" "LNKFLAGS = -pg" #SunOS version 4.1 or later, BSD environment, minimum features. sunos41min: @echo Minimum interactive $(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNORETRY \ -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS \ -DNOSHOW -DNOSETKEY -DNOUUCP -DNORECALL -DNOREDIRECT \ -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \ -DNONET -DCK_SMALL -DNOCKSPEED -DNOCKTIMERS -DNOLOGIN \ -DNOCKXYZ -DNOKERBEROS -DNOMKDIR -DNOPATTERNS -DNOPERMS -DNOPIPESEND \ -DNORECURSIVE -DNORENAME -DNORESEND -DNOSETKEY \ -DNOTRIGGER -DNOTUNING $(KFLAGS)" "LNKFLAGS = -s" #SunOS version 4.1, BSD environment, min size, command-line only... sunos41m: @echo Minimum size $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOICP $(KFLAGS)" #SunOS version 4.1, BSD environment, min size, cmd-line only, remote only... # sunos41mr: @echo Minimum size $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOICP -DNOLOCAL $(KFLAGS)" #SunOS version 4.1, BSD environment, min size, interactive... sunos41mi: @echo Minimum size $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOCMDL $(KFLAGS)" #SunOS version 4.1, BSD environment, min size, interactive, remote only... sunos41mir: @echo Minimum size $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOCMDL -DNOLOCAL $(KFLAGS)" #SunOS 4.1, System V R3 environment (-i option omitted). sunos41s5: @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3... @echo For testing purposes only - NOT for production use. @echo For a useable version, make sunos41 instead. $(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \ KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DNOLEARN -DCK_POLL $(KFLAGS) -O" #As above, but with curses support sunos41s5c: @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3... @echo Curses included. @echo For testing purposes only - NOT for production use. @echo For a useable version, make sunos41 instead. $(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \ KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DNOLEARN \ -DCK_POLL -DCK_CURSES -DCK_NEWTERM $(KFLAGS) -O" "LIBS= -lcurses" #As above, but with curses support AND net support sunos41s5tcpc: @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3... @echo TCP/IP and curses included. No debug log. @echo For testing purposes only - NOT for production use. @echo For a useable version, make sunos41 instead. $(MAKE) xermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \ KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DCK_POLL \ -DNODEBUG -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET $(KFLAGS) -O" \ "LIBS= -lcurses -lresolv" # (End of SunOS test entries...) #Apollo with Domain SR10.0 or later, BSD environment #Reportedly, it might also help to add '-A,systype=bsd4.3' to CFLAGS. #Reportedly, there is also a problem with getc & putc macros that can #be handled by using '#ifdef apollo' somewhere to redefine them??? #On the other hand, other reports indicate that it works fine as-is. #NOTE: This entry was previously like this: # $(MAKE) wermit "CFLAGS= -DNOFILEH -DBSD4 $(KFLAGS) -Uaegis \ # -DTCPSOCKET -U__STDC__" #Reports (Dec 91) indicate SR10 has an ANSI-compliant C compiler, #in addition to an older one that claimed to be ANSI-compliant but wasn't. #The following make entry (plus checks that are made in ckcdeb.h) detect #which compiler is used and define the CK_ANSIC or NOANSI flags accordingly. sr10-bsd: @echo Making C-Kermit $(CKVER) for Apollo SR10.0 / BSD ... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DAPOLLOSR10 -DBSD43 -DTCPSOCKET -DCK_CURSES -DNOLEARN \ -Uaegis $(KFLAGS)" "LIBS= -lcurses -ltermcap" #Apollo with Domain SR10.0 or later, System V R3 environment. #Don't use the optimizer (-O), it causes problems at runtime. sr10-s5r3: @echo Making C-Kermit $(CKVER) for Apollo SR10.0 / Sys V R3 ... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DNOFILEH -DSVR3 -DAPOLLOSR10 -DNOLEARN $(KFLAGS) \ -Uaegis -U__STDC__" #Apollo Domain/IX (untested, try this if sr10-bsd doesn't work) # -DTCPSOCKET can probably be added here. apollobsd: @echo Making C-Kermit $(CKVER) for Apollo Domain/IX... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CC= /bin/cc " "CC2= /bin/cc " \ "CFLAGS= -DNOFILEH -DBSD4 -DAPOLLOBSD -DNOLEARN $(KFLAGS) -Uaegis" #Version 7 Unix (see comments near top of makefile) v7: @echo Making C-Kermit $(CKVER) for UNIX Version 7. @echo Read the makefile if you have trouble with this... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \ -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \ -DNPTYPE=$(NPTYPE) $(DIRECT) -DO_RDWR=2 -DO_NDELAY=0 -DO_SCCS_ID \ -DNOLEARN $(KFLAGS)" #AT&T UNIX System V R3, signal() is void rather than int. #Uses dirent.h and Honey DanBer UUCP. #Add the -i link option if necessary. #If you get errors like "ws_row undefined" in ckutio.c, add -DNONAWS. sys5r3: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS) -O" \ "LNKFLAGS=" #As above, plus curses. sys5r3c: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3 + curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES -DNONAWS -DNOLEARN \ $(KFLAGS) -O" "LNKFLAGS=" "LIBS = -ltermlib" #System V R3.2 for PCs built on Interactive UNIX SV/386 R4.x #but with all calls to dup2() disabled because generic SVR3 does not have dup2. # (The -linet library might not need to be in this one.) sys5r32is: @echo 'Making C-Kermit $(CKVER) for System V/386 R32 $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \ -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES -DNONAWS \ -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD -DNOFDZERO -DNOREDIRECT \ -DNOZEXEC -DNOLEARN $(KFLAGS)" "LIBS=-lcurses -lc_s -linet" #System V R3.2 for PCs built on Interactive UNIX SV/386 R4.x #but with all calls to dup2() disabled because generic SVR3 does not have dup2. #With TCP/IP added. sys5r32isnet: @echo 'Making C-Kermit $(CKVER) for System V/386 R32 + TCP/IP $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \ -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES -DNONAWS \ -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD -DNOFDZERO -DNOREDIRECT \ -DNOLEARN -DNOZEXEC -DTCPSOCKET $(KFLAGS)" "LIBS=-lcurses -lc_s -linet" iclsys5r3: make sys5r3 KTARGET=$${KTARGET:-$(@)} KFLAGS=-DICLSVR3 #AT&T UNIX System V R3. As above, but no ANSI prototyping. sys5r3na: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DNOANSI -DNOLEARN $(KFLAGS) -O" \ "LNKFLAGS=" #AT&T UNIX System V R3, for 3B computers with Wollongong TCP/IP. sys5r3net3b: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX SVR3/3B/Wollongong...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DWOLLONGONG -DNOLEARN $(KFLAGS) \ -O" "LIBS= -lnet -lnsl_s" "LNKFLAGS =" #AT&T UNIX System V R3, signal() is void rather than int. #Uses dirent.h and Honey DanBer uucp, has . #Has for RTS/CTS flow control. sys5r3tx: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTERMIOX -DNOLEARN \ $(KFLAGS) -i -O" "LNKFLAGS =" #AT&T UNIX System V R3, signal() is void rather than int. #Uses dirent.h and Honey DanBer uucp, has . #Has for RTS/CTS flow control. sys5r3sx: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \ $(KFLAGS) -i -O" "LNKFLAGS =" #AT&T UNIX System V R4. #Has . sys5r4: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DTERMIOX -DNOLEARN $(KFLAGS)" \ "LNKFLAGS = -s" #AT&T UNIX System V R4 with Wollongong TCP/IP. #Has . sys5r4net: @echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...' @echo ' If sockets-library routines are missing at link time, then' @echo ' try the sys5r4net2 entry.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN \ -DTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s" #As above, but needs libs included. sys5r4net2: @echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.' @echo ' (Search for WOLLONGONG...)' $(MAKE) sys5r4net KTARGET=$${KTARGET:-$(@)} "LIBS= -lsocket -lnsl" #As above plus curses. sys5r4net2c: echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...' @echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.' @echo ' (Search for WOLLONGONG...)' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN \ -DTERMIOX -DWOLLONGONG -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \ "LIBS= -lsocket -lnsl -lcurses" #DELL UNIX System V R4. #Has , regular Berkeley sockets library, i.e. in.h and inet.h #are not misplaced in sys (rather than netinet and arpa, respectively). #Uses ANSI C constructs, advisory file locking on devices, etc. #Warning: -DSTERMIOX enables hardware flow control (RTS/CTS), but reportedly #this does not work with the normal drivers. However, it might still work #on non-Dell systems, or even Dell systems with different drivers installed. dellsys5r4: @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \ -DTCPSOCKET -DSTERMIOX -DCK_POLL $(KFLAGS)" \ "LIBS= -lsocket -lnsl" "LNKFLAGS = -s" #As above, curses support added... dellsys5r4c: @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \ -DTCPSOCKET -DSTERMIOX -DCK_CURSES -DCK_POLL \ $(KFLAGS)" "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s" #Minimum interactive: As above, but with every conceivable option removed. dellsys5r4mi: @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...' @echo 'Minimum-size interactive' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \ -UTCPSOCKET -DNOCMDL -DNOSPL -DNOXMIT -DCK_POLL \ -DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \ -DNOSCRIPT -DNOCSETS -DNOSHOW -DNOSETKEY -DNOSERVER -DNOUUCP \ -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \ $(KFLAGS)" "LNKFLAGS = -s" #Command-line only version. dellsys5r4m: @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...' @echo 'Command-line only' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \ -UTCPSOCKET -DNOICP -DNOFRILLS -DNODIAL -DNODEBUG -DNOTLOG -DNOCSETS \ -DNOSETKEY -DNOESCSEQ -DNOJC -DNOFDZERO -DCK_POLL \ $(KFLAGS)" "LNKFLAGS = -s" #AT&T UNIX System V R4. #Has . sys5r4sx: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \ $(KFLAGS)" "LNKFLAGS = -s" "LIBS=$(LIBS)" #AT&T UNIX System V R4. #Has , regular Berkeley sockets library, i.e. in.h and inet.h #are not misplaced in sys (rather than netinet and arpa, respectively). #Uses ANSI C constructs, , etc etc. sys5r4sxtcp: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \ -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \ "LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s" #AT&T UNIX System V R4. #As above + curses. sys5r4sxtcpc: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \ -DSTERMIOX -DCK_CURSES -DTCPSOCKET $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)" "LNKFLAGS = -s" #AT&T UNIX System V R4. CONSENSYS SVR4.2-1. #Has , regular Berkeley sockets library, i.e. in.h and inet.h #are not misplaced in sys (rather than netinet and arpa, respectively). #Uses ANSI C constructs, , etc. # Fullscreen -DCK_CURSES added (with curses & termcap libs) # Submission by Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu sys5r4sxtcpf: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES $(KFLAGS)" \ "LIBS= -lsocket -lnsl -L/usr/ccs/lib -lcurses -ltermcap" \ "LIBS=$(LIBS)" "LNKFLAGS = -s" #Smallest possible version for System V R4 s5r4m: @echo Minimum size $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \ -DNOSCRIPT -DNOCSETS -DNOICP -DNOMSEND -UTCPSOCKET" "LNKFLAGS = -s" #Smallest possible interactive version of above s5r4mi: @echo Minimum interactive $(MAKE) "MAKE=$(MAKE)" sys5r4sx \ "KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNOSHOW \ -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOSETKEY \ -UTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s" #AT&T UNIX System V R4, has #ANSI C function prototyping disabled. sys5r4sxna: @echo No ANSI C prototyping... $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DNOANSI" #Stratus FTX. ftx: @echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DSTERMIOX \ -DNOGETUSERSHELL -DNOLEARN +DA1.1 $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS=$(LIBS)" #Stratus FTX + TCP/IP. ftxtcp: @echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \ -DSTERMIOX -DTCPSOCKET -DNO_DNS_SRV +DA1.1 $(KFLAGS)" \ "LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s" #NCR MP-RAS 2.03 or 3.02 mpras: @echo 'Making C-Kermit $(CKVER) for NCR MP-RAS...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX \ -DNOGETUSERSHELL -DUSE_FILE__CNT -DNOLEARN -DNO_DNS_SRV $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS=$(LIBS)" #NCR MP-RAS 2.03 or 3.02 with TCP/IP and curses mprastcpc: @echo 'Making C-Kermit $(CKVER) for NCR MP-RAS + TCP/IP + curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CFLAGS=-DTCPSOCKET \ -DCK_CURSES -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \ -DNOGETUSERSHELL -DNO_DNS_SRV DUSE_FILE__CNT -O $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)" #SINIX-L V5.41 - includes curses, tcp/ip - Use this one for i386. #This version of SINIX doesn't like fdopen() or popen(). sinix541: @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX V5.41/i386' $(MAKE) ckcpro.$(EXT) "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP \ -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV \ -DSNI541 -DNOGETUSERSHELL -DNONETCMD -DNOPOPEN -kansi -W0 $(KFLAGS)" $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DNOPOPEN \ -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \ -DSNI541 -DNOGETUSERSHELL -DNONETCMD -kansi -W0 -O $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s" sinix541i: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sinix541 #SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for MIPS. # As of C-Kermit 7.1, optimization removed -- takes (literally) forever. sinix542: $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \ -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \ -DSNI542 -DNOGETUSERSHELL -kansi -W0 $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s" #SINIX V5.42 gcc - includes curses, tcp/ip, everything. #This one was used to build the Pyramid-architecture RM600 version #on SINIX-P 5.42 A10 with gcc but should work for SINIX 5.42 on any other #architecture with gcc. sinix542g: $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \ "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \ -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \ -DSNI542 -DNOGETUSERSHELL $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" \ "LNKFLAGS = -s" #SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for Intel. # (Note: SNI discontinued Intel support after 5.42.) sinix542i: @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX-Z V5.42...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DFNFLOAT -DSTERMIOX \ -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV -kansi \ -DSNI542 $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" \ "LNKFLAGS = -s" #Siemens Nixdorf Reliant UNIX V5.43 - includes curses, tcp/ip, everything: # . gettimeofday() suddenly has only one arg instead of two (GTODONEARG). # . The syntax of the Olimit specifier changed. # . The name was changed from SINIX to Reliant UNIX in version 5.43C. sni543: @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.43' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSINIX -DSNI543 -DSVR4 -DDIRENT -DHDBUUCP \ -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \ -DNO_DNS_SRV -kansi -W0 -O -F Olimit,3100 $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s" #Siemens Nixdorf Reliant UNIX V5.44 - Like 5.43 but with different banner. sni544: @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.44' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSINIX -DSNI544 -DSVR4 -DDIRENT -DHDBUUCP \ -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \ -DNO_DNS_SRV -kansi -W0 -O -K Olimit,3100 $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s" #Commodore Amiga with AT&T UNIX System V R4 and TCP/IP support. #Has . svr4amiganet: @echo 'Making C-Kermit $(CKVER) for Amiga SVR4 + TCP/IP...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX \ -DTCPSOCKET -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \ "LIBS = -lsocket -lnsl -ltermlib" #SCO (Novell (Univel)) UnixWare 1.x or 2.0, no TCP/IP. #This assumes the Novell SDK 1.0, which has . #UnixWare users with the "Prime Time Freeware" CD-ROM SDK will probably have #to use the sys5r4 entry (no termiox.h file, so no hardware flow control). #Change -DSELECT to -DCK_POLL if -DSELECT causes problems. # NOTE: Unixware 1.x builds have not been tried in C-Kermit 7.0. unixware: $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \ -DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt" #UnixWare 1.x or 2.0 with TCP/IP and curses. #fork()-based CONNECT - no high serial speeds. unixwarenetc: $(MAKE) "MAKE=$(MAKE)" sys5r4sxtcpc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \ -DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt -lresolv" uw10: $(MAKE) unixwarenetc KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)" #This is for Unixware 2.0.x only - use unixware21 for UW 2.1.x. #Has special library search and enables special kludge around library #foulup regarding vfork() (which Kermit doesn't use). Forces POSIX-style #hangup. unixware20: @echo 'Making C-Kermit $(CKVER) for UnixWare 2.0.x...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DOLD_UNIXWARE -DUNIXWARE2 -DSELECT -DSVR4 -DDIRENT \ -DHDBUUCP -DBIGBUFOK -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES \ -DTCPSOCKET -DUW200 -DFNFLOAT -DCK_NEWTERM -DNOSYSLOG $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lgen -lm -lresolv" \ "LNKFLAGS = -s" uw20: $(MAKE) unixware20 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)" #Adds big buffers ("large memory model") - otherwise the same as UnixWare 1.x. unixware21: @echo 'Making C-Kermit $(CKVER) for UnixWare 2.1.x...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \ -DNOSYSLOG -DSTERMIOX -DCK_CURSES -DTCPSOCKET \ -DCK_NEWTERM -DFNFLOAT -DUNIXWARE2 $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \ $(LIBS)" "LNKFLAGS = -s" #Unixware 2.1.0 uw21: $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)" #Unixware 2.1.3 uw213: $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DUSE_FILE__CNT $(KFLAGS)" #Unixware 2.1 with IKSD support uw21iksd: $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DCK_SHADOW $(KFLAGS)" "LIBS= -lgen" #UnixWare 7 with tc[gs]etspeed() high serial speeds & select()-based CONNECT #and as of C-Kermit 8.0.212, large file support (LFS). #NOTE: This is the one we use. unixware7t: @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \ -DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \ -DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL \ -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DNEEDMDMDEFS $(KFLAGS)" \ "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \ "LNKFLAGS = -s" #UnixWare 7 - select()-based CONNECT - no POSIX i/o - no high serial speeds. #In other words, just like the UnixWare 1 and 2 builds. unixware7x: @echo 'Making C-Kermit $(CKVER) for UnixWare 7...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \ -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \ -DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \ "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \ "LNKFLAGS = -s" #UnixWare 7 with POSIX cfset[oi]speed() to allow high serial speeds. #(but the high speeds don't work) unixware7p: @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \ -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \ -DFNFLOAT -DCK_NEWTERM -DNOLSTAT $(KFLAGS)" \ "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \ "LNKFLAGS = -s" # UnixWare 7 built with gcc - This does not work at all... # Reportedly gcc 2.8.1 is broken on Unixware 7. Try egcs? unixware7g: @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with gcc...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib" "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \ -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \ -DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \ "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \ "LNKFLAGS = -s" unixware7: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \ KTARGET=$${KTARGET:-$(@)} uw7: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \ KTARGET=$${KTARGET:-$(@)} #SCO OpenUNIX 8.0 ou8: @echo 'Making C-Kermit $(CKVER) for Open UNIX 8...' $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DOU8 $(KFLAGS)" unixware7t \ KTARGET=$${KTARGET:-$(@)} #UnixWare 7 with OpenSSL uw7ssl uw7+ssl: @echo 'Making C-Kermit $(CKVER) for UnixWare 7 and OpenSSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DCK_AUTHENTICATION -DCK_SSL -DCK_SHADOW \ -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \ -DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \ -DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL \ $(SSLINC) $(KFLAGS)" \ "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \ -lgen -lcudk70 $(SSLLIB) -lssl -lcrypto $(LIBS)" \ "LNKFLAGS = -s" #As above but includes Shadow password support needed for IKSD. uw7iksd: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen" unixware7t #As above but links with static API for realpath() so a binary built #with this target on UW7.1 will also work on 7.0. Requires SCO UDK #rather than the stock compiler. uw7iksdudk: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen -lcudk70" unixware7t #ESIX SVR4.0.3 or 4.04 with TCP/IP support. #Has , ANSI C function prototyping disabled. #Add -m486 to CFLAGS if desired. esixr4: @echo 'Making C-Kermit $(CKVER) for ESIX SVR4 + TCP/IP...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOANSI \ -DSTERMIOX -DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s" \ "LIBS = -lsocket -lnsl" #AT&T UNIX System V R4. #Has , Wollongong WIN/TCP TCP/IP. sys5r4sxnet: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \ -DSTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s" #AT&T UNIX System V R4, no or . sys5r4nx: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS)" \ "LNKFLAGS = -s" #AT&T UNIX System V R4, no or , curses, TCP/IP. sys5r4nxnetc: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \ -DCK_CURSES -DTCPSOCKET $(KFLAGS)" \ "LIBS = -lcurses -lsocket -lnsl -ltcpip" \ "LNKFLAGS = -s" #AT&T UNIX System V R4, no or , Wollongong TCP/IP. sys5r4nxtwg: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s" #ICL UNIX System V R4.(DRS N/X) version :- #UNIX System V Release 4.0 ICL DRS 6000 (SPARC) #DRS/NX 6000 SVR4 Version 5 Level 1 Increment 4 #Has , regular Berkeley sockets library, i.e. in.h and inet.h #are not misplaced in sys (rather than netinet and arpa, respectively). #Uses ANSI C constructs, advisory file locking on devices, etc. #Remove -lnsl if it causes trouble. iclsys5r4: @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 (DRS N/X)' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \ -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lresolv " "LNKFLAGS = -s" #As above but for DRS/NX 4.2MP 7MPlus. iclsys5r4m+: @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOIKSD \ -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lm -lc -g -lgen " "LNKFLAGS = -s" #As above but for DRS/NX 4.2MP 7MPlus with IKSD support. iclsys5r4m+iksd: @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \ -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lm -lc -g -lgen -lresolv " "LNKFLAGS = -s" iclsys5r4_486: $(MAKE) "MAKE=$(MAKE)" iclsys5r4 KTARGET=$${KTARGET:-$(@)} #Data General DG/UX 4.30 (System V R3) for DG AViiON, with TCP/IP support. dgux430: @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX430 -DSVR3 -DDIRENT -DTCPSOCKET \ -DNOINADDRX -DNOGETUSERSHELL $(KFLAGS)" #Data General DG/UX 4.30 for DG AViiON, with TCP/IP support with BSDisms. dgux430bsd: @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX430 -D_BSD_SOURCE -DBSD4 \ -DNOINADDRX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)" #Data General DG/UX 5.4 (System V R4) for DG AViiON, with TCP/IP support. #Add -lsocket -lnsl if inet_addr comes up missing... #Hmmm - I really think CK_POLL can be removed from this one in which case #there is no difference between dgux540 and dgux540i. dgux540: @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \ -DSTERMIOX -DTCPSOCKET -DCK_POLL -DNOGETUSERSHELL $(KFLAGS)" #Data General DG/UX 5.40 (System V R4) for Intel AViiON, with TCP/IP support. dgux540i: @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \ -DSTERMIOX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)" \ "LIBS = -lsocket -lnsl" dgux54: make dgux540 KTARGET=$${KTARGET:-$(@)} #Data General DG/UX 5.4 (= System V R4) for DG AViiON, with TCP/IP support. # And curses. dgux540c: @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \ $(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s" #As above but for Intel - only difference is name library names. dgux540ic: @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \ $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap" dgux54c: make dgux540c KTARGET=$${KTARGET:-$(@)} #DG/UX 5.4R3.10 dgux54310: @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4R3...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DDGUX540 -DDGUX54310 -DDIRENT -DHDBUUCP -DSELECT \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \ -DNOINADDRX $(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s" #DG/UX 5.4R4.10 - Includes everything. dgux54410: @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.10...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX540 -DDGUX54410 -DDIRENT -DHDBUUCP -DSELECT \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \ -DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap" #DG/UX 5.4R4.11 - Includes everything. dgux54411: @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.11...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX540 -DDGUX54411 -DDIRENT -DHDBUUCP -DSELECT \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \ -DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap" #DG/UX 5.4R4.20 - Includes everything. dgux54420: @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.20...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DDGUX540 -DDGUX54420 -DDIRENT -DHDBUUCP -DSELECT \ -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \ -DNOINADDRX $(KFLAGS)" \ "LIBS = -lsocket -lresolv -lnsl -lcurses -ltermcap" #Silicon Graphics System V R3 with BSD file system (IRIS) iris: @echo Making C-Kermit $(CKVER) for Silicon Graphics IRIX pre-3.3... $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR3 -DLONGFN -DNOLEARN $(KFLAGS) -I/usr/include/bsd" \ "LIBS = -lbsd" #Silicon Graphics IRIS System V R3 irix33: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 3.3...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS) -O" \ "LNKFLAGS = -s" #Silicon Graphics Iris Indigo with IRIX 4.0.0 or 5.0... #Strict ANSI C compilation, TCP/IP support included irix40: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \ -DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O -Olimit 1600 -I/usr/include/bsd" \ "LNKFLAGS = -s" #As above, but with fullscreen display (curses) and Sun Yellow Pages support. #NOTE: IRIX versions prior to 5 run COFF binaries. irix40ypc: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0.' @echo 'Includes fullscreen file display and Sun Yellow Pages...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES \ -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET $(KFLAGS) \ -O -Olimit 1600 -I/usr/include/bsd" \ "LIBS = -lcurses -lsun" "LNKFLAGS = -s" # Silicon Graphics Iris Series 4D/*, IRIX 4.0.x, -O4 ucode optimized. # Huge temporary file space needed for ucode optimizer. If you get an error # like "ugen: internal error writing to /tmp/ctmca08777: Error 0", define the # the TMPDIR environment variable to point to a file system that has more # space available, e.g. "setenv TMPDIR /usr/tmp". irix40u: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \ -DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \ "LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u" # As above, with Curses Support added irix40uc: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \ -DCK_ANSIC -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \ "LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u" "LIBS= -lcurses -ltermcap" #Silicon Graphics IRIX 5.x. #Yellow Pages and Curses support included. #IRIX version 5.x can run COFF or ELF binaries. irix51: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 5.x' @echo 'Includes fullscreen file display and Yellow Pages...' @echo 'Add -mips to CFLAGS specify a particular hardware target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DIRIX51 -DSVR4 -DDIRENT -DHDBUUCP -DCK_CURSES -DCK_NEWTERM \ -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET -DSELECT -DNOGETUSERSHELL \ -DSYSTIMEH -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) -ansi -O -Olimit 3000" \ "LIBS = -lcurses" "LNKFLAGS = -s" #Use this one if irix51 blows up due to lack of swap space or whatever. irix51x: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 5.x' @echo 'Includes fullscreen file display and Yellow Pages...' @echo 'Add -mips to CFLAGS specify a particular hardware target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DIRIX51 -DSVR4 -DDIRENT -DHDBUUCP -DCK_CURSES -DCK_NEWTERM \ -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET -DSELECT -DNOGETUSERSHELL \ -DSYSTIMEH -DDCLPOPEN -DDCLFDOPEN $(KFLAGS)" \ "LIBS = -lcurses" "LNKFLAGS = -s" irix51ypc: $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS= $(KFLAGS)" #IRIX 5.2 adds RTS/CTS irix52: $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DIRIX52 -DCK_RTSCTS $(KFLAGS)" irix53: $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DIRIX52 -DIRIX53 -DCK_RTSCTS $(KFLAGS)" irix53x: $(MAKE) "MAKE=$(MAKE)" irix51x KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DIRIX52 -DIRIX53 -DCK_RTSCTS $(KFLAGS)" #Silicon Graphics IRIX 6.[024] common stuff. #Yellow Pages and Curses support included. #IRIX version 6.0 and later runs only ELF binaries. #Depends on code changes in ckcdeb.h that make -DIRIX6x define all #lower IRIX6x values and IRIX51. irix6x: @echo 'Includes fullscreen file display and Yellow Pages...' @echo 'Add -mips to specify a particular hardware target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \ -DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET \ -DSELECT -DCK_RTSCTS -O $(KFLAGS)" \ "LIBS = -lcurses" "LNKFLAGS = -s $(LNKFLAGS)" #Silicon Graphics IRIX 6.0. irix60: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.0' @$(MAKE) "MAKE=$(MAKE)" \ "KFLAGS=-DIRIX60 -Olimit 2138 $(KFLAGS)" \ irix6x KTARGET=$${KTARGET:-$(@)} #Silicon Graphics IRIX 6.2. #Serial speeds > 38400 are available in IRIX 6.2 on O-class machines only. #Note: Olimit must be a number > 0. irix62: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.2' @$(MAKE) "MAKE=$(MAKE)" \ LNKFLAGS="-Wl,-woff,84" \ "KFLAGS=-DIRIX62 -Olimit 4700 $(KFLAGS)" \ irix6x KTARGET=$${KTARGET:-$(@)} #Silicon Graphics IRIX 6.3. irix63: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.3' @$(MAKE) "MAKE=$(MAKE)" irix62 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DIRIX63" #Silicon Graphics IRIX 6.4. # -woff,84 to linker stops complaints about no symbols loaded from # curses, and -woff 1110 stops complaints about unreachable "break;" # statements in ckcpro.c among others. # tested on SGI Octane, running IRIX 6.4 up to 115200 bps. # -Olimit 0 means infinite. irix64: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4' @$(MAKE) "MAKE=$(MAKE)" \ LNKFLAGS="-Wl,-woff,84" \ "KFLAGS=-DIRIX64 -DCK_RTSCTS -Olimit 3000 -woff 1110 $(KFLAGS)" \ irix6x KTARGET=$${KTARGET:-$(@)} irix64gcc: @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4 gcc' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS= -DSVR4 -DIRIX64 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \ -DSELECT -DPWID_T=uid_t -DTCPSOCKET -DNOCOTFMC \ -DCK_ANSIC -DCK_RTSCTS -DCK_NEWTERM -DCK_CURSES \ $(KFLAGS) -O" "LIBS= -lcurses -ltermcap -lcrypt" #Note the new Optimization option syntax for MIPSpro CC 7.2.1.2m. #See note on irix65gcc target about Large File Support (LFS). irix65: @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5' @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-Wl,-woff,84" \ "KFLAGS=-DIRIX65 -D_LARGEFILE_SOURCE -DCK_RTSCTS -OPT:Olimit=0 \ -woff 1110,1552,1174 $(KFLAGS)" \ irix6x KTARGET=$${KTARGET:-$(@)} #Build for those that have GCC instead of MIPSpro. # # Large File Support note: use the define _LARGEFILE_SOURCE to enable support # for files larger than 2GB. This may work on releases of Irix prior to # 6.5.xx. To verify, check the man page for fstat and verify that off_t is a # 64 bit value for an -n32 build. Also check the manpage for fseek and ftell # to verify that the fseek64 and ftell64 functions are provided. If so, then # LFS support should work and you can try adding -D_LARGEFILE_SOURCE to CFLAGS # for your selected Irix target. # irix65gcc: @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5 with gcc' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CC = gcc" "CC2 = gcc" \ "CFLAGS= -DSVR4 -DIRIX65 -D_LARGEFILE_SOURCE -DDIRENT -DHDBUUCP \ -DNOGETUSERSHELL -DSELECT -DPWID_T=uid_t -DTCPSOCKET -DNOCOTFMC \ -DCK_ANSIC -DCK_RTSCTS -DCK_NEWTERM -DCK_CURSES \ $(KFLAGS) -O" "LIBS= -lcurses" # The 64-bit IRIX target works but presumably is no longer needed given the # large file support in the more portable and compact 32-bit version. irix65_64: @echo 'Making C-Kermit $(CKVER) 64-bit for SGI IRIX 6.5' @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-Wl,-woff,84" \ "KFLAGS=-DIRIX65 -64 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110,1552,1174 \ -DCK_64BIT $(KFLAGS)" \ irix6x KTARGET=$${KTARGET:-$(@)} #Dumb down to MIPS-2 if building on R5000 or higher... irix65mips2: @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5 MIPS-2' @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-o32 -mips2 -Wl,-woff,84" \ "KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -o32 -mips2 \ -woff 1110,1552,1174 $(KFLAGS)" \ irix6x KTARGET=$${KTARGET:-$(@)} #Special target that adds srp, ssl, and zlib support. This requires #that you have pkgsrc installed instead of Irix Freeware. See #NetBSD.org for pkgsrc for Irix. You will need to BUILD the srp_client #package yourself. Install it manually using the directions found #in the netbsds+ssl+srp+zlib target comments. irix65+ssl+srp+zlib: @echo 'Making C-Kermit $(CKVER) for IRIX 6.5 with gcc and SSL SRP ZLIB' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CC = gcc" "CC2 = gcc" \ "CFLAGS= -DIRIX65 -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL -DSELECT \ -DTCPSOCKET -DNOCOTFMC -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC \ -I/usr/pkg/include -DCK_AUTHENTICATION -DCK_SRP -DPRE_SRP_1_4_5 \ -DCK_RTSCTS -DCK_NCURSES -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DCK_SSL \ -DLIBDES -DZLIB -DFNFLOAT -I/usr/pkg/include/openssl $(KFLAGS) -O" \ "LIBS= -L/usr/pkg/lib -rpath /usr/pkg/lib -lncurses -lsrp -lgmp -ldes \ -lssl -lkrypto -lcrypto -lcrypt -lz -lm" irix6x+krb5: @echo 'Includes fullscreen file display and Yellow Pages...' @echo 'Add -mips to specify a particular hardware target.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \ -DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET\ -DSELECT -DCK_RTSCTS -O \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DCK_ENCRYPTION -DCK_DES \ $(K5INC) $(K5INC)/krb5 $(KFLAGS)" \ "LIBS = -lcurses $(K5LIB) -ldes425 -lkrb5 \ -lcom_err -lcrypto -lcrypt -lgssapi_krb5" \ "LNKFLAGS = -s $(LNKFLAGS)" irix65+krb5: @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5' @$(MAKE) "MAKE=$(MAKE)" \ LNKFLAGS="-Wl,-woff,84" \ "KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110,1552,1174 \ $(KFLAGS)" \ irix6x+krb5 KTARGET=$${KTARGET:-$(@)} #In case they type "make sys5"... sys5: $(MAKE) "MAKE=$(MAKE)" sys3 KTARGET=$${KTARGET:-$(@)} #Generic ATT System III or System V (with I&D space) sys3: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III' @echo 'or System V R2 or earlier...' @echo 'add -DNOMKDIR if mkdir is an undefined symbol.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DNOUNICODE -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL \ -DNOINITGROUPS -DNOFTRUNCATE -DNOREALPATH -DNOLEARN $(KFLAGS) -i -O" \ "LNKFLAGS = -i" #Generic ATT System III or System V (no I&D space) sys3nid: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III' @echo 'or System V R2 or earlier, no I&D space...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOSYMLINK \ -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE -DNOLEARN $(KFLAGS) -O" \ "LNKFLAGS =" #Generic ATT System III or System V R2 or earlier, "no void": #special entry to remove "Illegal pointer combination" warnings. sys3nv: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III' @echo 'or System V R2 or earlier...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOGETUSERSHELL \ -DNOSYMLINK -DNOFTRUNCATE -DNOINITGROUPS -DNOLEARN \ -Dvoid=int $(KFLAGS) -i -O" \ "LNKFLAGS = -i" # AT&T 7300 UNIX PC. As of C-Kermit 6.1, many of these entries don't work # any more due to "Out of memory" or "Too many defines" errors during # compilation, at least not on systems without lots of memory. The sys3upcgc # entry works (using gcc) with optimization removed, and might also work # with optimization enabled on machines with larger memories. #AT&T 7300/UNIX PC (3B1) systems, sys3 but special handling for internal modem. #Link with the shared library -- the conflict with openi in shared library #is solved with -Dopeni=xopeni. Note that the xermit target can't be used #for the Unix PC; there is no select(). sys3upc: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...' @echo 'If shared lib causes trouble, use make sys3upcold.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOREALPATH -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOREDIRECT -DNOGFTIMER -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \ "CC2 = ld /lib/crt0s.o /lib/shlib.ifile" "LNKFLAGS = -s" #AT&T 7300/Unix PC systems, minimum kermit for those with smaller amounts #of memory. sys3upcm: @echo Minimum interactive $(MAKE) "MAKE=$(MAKE)" sys3upc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \ -DNOSYSLOG -DNOSETKEY -DNOREALPATH" #AT&T 7300/UNIX PC (3B1) systems, with curses support. #Curses and the shared library don't get along, so we don't use the #shared library. We need to include CK_NEWTERM to avoid a conflict #with curses and buffering on stdout. Merged with submission by #Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu. #We don't need -Dopeni=xopeni since we're not using the shared library, #but we keep it to be consistent with the other entries. sys3upcc: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DATT7300 -DNOREALPATH \ -DCK_CURSES -DCK_NEWTERM -DNOMKDIR -DNOREDIRECT -DNOGFTIMER -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \ "LIBS = -lcurses" "LNKFLAGS = -s" #Like sys3upcc but for AT&T UNIX 3.51m (released as a patch on Fix Disk 2), #adds hardware flow control. att351m: $(MAKE) "MAKE=$(MAKE)" sys3upcc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DCK_RTSCTS -DUNIX351M" #As above but with gcc. att351gm: $(MAKE) "MAKE=$(MAKE)" sys3upcgc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DCK_RTSCTS -DUNIX351M" #AT&T 7300 UNIX PC (3B1), as above, but no newterm(). sys3upcx: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DATT7300 -DNOREALPATH -DNOUNICODE -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DCK_CURSES -DNOMKDIR -DNOREDIRECT -DNOGFTIMER -DUSE_MEMCPY $(KFLAGS) \ -Dopeni=xopeni" "LIBS = -lcurses -ltermcap" "LNKFLAGS = -s" #AT&T 7300/UNIX PC (3B1) systems, with curses and shared library support. sys3upcshcc: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...' @echo 'With curses. Requires shcc.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DATT7300 -DNOMKDIR -DNOREALPATH -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DCK_NEWTERM -DCK_CURSES -DNOREDIRECT -DNOGFTIMER \ -DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \ "LNKFLAGS = -i -s" "CC = shcc" "CC2 = shcc" "LIBS = -lcurses" #AT&T 7300/UNIX PC (3B1) systems, as above, no curses, but use gcc. sys3upcg: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOUNICODE -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOGFTIMER -DNOMKDIR -DNOREALPATH $(KFLAGS) -Dopeni=xopeni" \ "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib" #AT&T 7300/UNIX PC (3B1) systems, curses and gcc. #Optimization omitted -- add it back in if your machine has lots of memory. sys3upcgc: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOGFTIMER -DNOUNICODE \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DCK_CURSES -DCK_NEWTERM -DNOMKDIR -DNOREALPATH -DNOLEARN $(KFLAGS)" \ "CC = gcc" "CC2 = gcc" "LIBS = -lcurses" "LNKFLAGS = -s" #AT&T 7300/UNIX PC (3B1) systems, special handling for internal modem. #No FULLSCREEN file transfer display (curses). sys3upcold: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOUNICODE -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOGFTIMER -DNOREDIRECT -DNOREALPATH $(KFLAGS) -O" "LNKFLAGS = -i" #As above, but with gcc. mininum features - fits on a 400K UNIX PC floppy #after compression with room to spare; add -DNOSHOW or other -DNOxxxx items #to reduce size even further. sys3upcgm: @echo Minimum interactive $(MAKE) "MAKE=$(MAKE)" sys3upcg KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \ -DNOSETKEY $(KFLAGS)" #This target is designed to create a version with the most features possible #that, after compression, still fits on a 400K UNIX PC floppy. sys3upcgfd: @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC floppy...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOSPL -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOGFTIMER -DNOREALPATH -Dopeni=xopeni \ -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \ "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s" #AT&T 6300 PLUS (warning, -O might make it run out of space). #NOTE: Remove -DHDBUUCP if not using Honey DanBer UUCP. att6300: @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOREALPATH -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOUNICODE $(KFLAGS) -O -Ml -i" "LNKFLAGS = -i -Ml" #As above, but with curses support. Debugging disabled to prevent thrashing. att6300c: @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOCSETS -DNOREALPATH \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DCK_CURSES -DNODEBUG -DNOUNICODE -DNOLEARN $(KFLAGS) -O -Ml -i" \ "LNKFLAGS = -i -Ml" "LIBS = -lcurses" #AT&T 6300 PLUS with no curses, no debugging (about 34K smaller) # -Optimization saves about 20K too. att6300nd: @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS, no debugging...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATT6300 -DHDBUUCP -DNODEBUG -DNOFILEH -DNOREALPATH \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOUNICODE -DNOLEARN $(KFLAGS) -O -i -Ml" "LNKFLAGS = -i -Ml" #AT&T 3B2 and maybe 3B20-series computers running AT&T UNIX System V R3. #This one was actually used to build C-Kermit 7.0 successfully on a 3B2/300. att3b2: @echo 'Making C-Kermit $(CKVER) for AT&T 3B2' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DNOREDIRECT -DUSE_MEMCPY \ -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOGFTIMER -DNOREALPATH -Dopeni=xopeni -DNOFRILLS -DNOLEARN \ -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \ "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s" # The next two are likely not to work as-is. #AT&T 3B2, 3B20-series computers running AT&T UNIX System V. #This is just generic System V with Honey DanBer UUCP, so refer to sys3hdb. #Remove -DNONAWS if you can get away with it. att3bx: $(MAKE) "MAKE=$(MAKE)" sys3hdb KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DNONAWS -DNOTIMEVAL" # 3Bx with charsets (except Unicode) but no curses. att3bx1: @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20' @echo 'with Honey DanBer UUCP no curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \ -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \ -DNOHELP -DNODEBUG -DNOGFTIMER -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOREALPATH -DNOUNICODE -i" \ "CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s" #AT&T 3B2, 3B20-series computers running AT&T UNIX System V, #with fullscreen file transfer display. att3bxc: @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20' @echo 'with Honey DanBer UUCP and curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DHDBUUCP -DNONAWS -DNOTIMEVAL $(KFLAGS) \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOREALPATH -DCK_CURSES -DCK_NEWTERM -DNOUNICODE -DNOLEARN -i -O" \ "LNKFLAGS = -i" "LIBS=-lcurses" #3bx with curses but no charsets att3bxc3: @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20' @echo 'with Honey DanBer UUCP with curses... no CSETS' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \ -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \ -DNOHELP -DNODEBUG -DNOGFTIMER -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOREALPATH -DNOCSETS -DCK_CURSES -DCK_NEWTERM -i" \ "CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s" "LIBS = -lcurses" #Any System V R2 or earlier with Honey DanBer UUCP (same as above) sys3hdb: @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III' @echo 'or System V R2 or earlier with Honey DanBer UUCP...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DHDBUUCP -DNOREALPATH -DNOUNICODE -DNOLEARN \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ $(KFLAGS) -i -O" "LNKFLAGS = -i" #Sperry/UNISYS 5000 UTS V 5.2 (System V R2), Honey DanBer UUCP unisys5r2: @echo 'Making C-Kermit $(CKVER) for Sperry/UNISYS 5000 UTS V 5.2...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DUNISYS52 -DHDBUUCP -DNOREALPATH -DNOUNICODE \ -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \ -DNOLEARN $(KFLAGS) -i -O" "LNKFLAGS = -i" #In case they say "make sys5hdb" instead of "make sys3hdb"... sys5hdb: $(MAKE) "MAKE=$(MAKE)" sys3hdb #Create the common header line for all hpux[5-11]* entries and above. This #extra entry is here because our header message length may differ for each #C-Kermit version. Don't use 'fold -s' for HP-UX 5.x - 7.x! This option is #available only for HP-UX 8.0 and above! hpux-header: @HPUX=`uname -r | sed -e 's/^[^1-9]*//' -e 's/\.00$$/.0/'` ; \ [ "$(MESSAGE0)" ] && MESSAGE1="$(MESSAGE0)" ; \ Message0='Making C-Kermit $(CKVER) for HP9000 HP-UX' ; \ Message1=$${MESSAGE1:='without any extra compiler optimization'} ; \ MessageH="$$Message0 $$HPUX" ; \ case $$HPUX in \ [567].*) echo "$$MessageH\n$$Message1" ;; \ *.*) echo "$$MessageH $${Message1}$(MESSAGE1A)" | fold -s ;; \ esac | sed -e 's/^ //' -e 's/ *$$//' # Peter E's updated HP-UX 5.xx entries Oct 2001. #HP-9000 500 HP-UX 5.xx, no TCP/IP. # Last known successful build: C-Kermit 8.0.206 2002/20/27. hpux0500: @MESSAGE0="no TCP/IP and no compiler optimization";\ MESSAGE0=$${MESSAGE1:-$$MESSAGE0} \ $(MAKE) hpux-header $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUX -DHPUX5 -DHPUXPRE65 -DNOREDIRECT -DDCLGETCWD \ -DNOGETUSERSHELL -DNOGFTIMER -DNOSYSLOG -DNOTOMACROS -DNOLSTAT \ -DNOSYMLINK -DNOINITGROUPS -DNOUNICODE -DNOLEARN -DNOLONGLONG \ -DVOID=int -DCKVOID=int $(KFLAGS)" "LIBS = $(LIBS)" "LNKFLAGS = " #HP-9000 500 HP-UX 5.21 with Wollongong WIN/TCP 1.2 TCP/IP. #Requires /usr/wins/usr/include and /usr/lib/libnet.a from Wollongong. #Optimization skipped - takes forever. Really. # WARNING: this doesn't work if a file called "hpux0500" is on the disk. # Last known successful build: C-Kermit 8.0.206 2002/20/27. hpux0500wintcp: @MESSAGE1="with WIN/TCP but without any extra compiler optimization" \ $(MAKE) hpux0500 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = -DTCPSOCKET -DHPUX5WINTCP -DINADDRX -DNO_DNS_SRV \ -DNOMHHOST -DVOID=int -DCKVOID=int -DNOHADDRLIST -DNOLONGLONG \ -I/usr/wins/usr/include $(KFLAGS)" "LIBS = /usr/lib/libnet.a" #HP-UX 6.5, short filenames, no network and no curses support. #ckcpro, ckuusr, ckuus3 and others are broken out because they make the #optimizer run away. Note that the XERMIT target does not work with HP-UX 6.5! # #If you get compiler warnings like: #'Switch table overflow. Try the -Wc,-Nw option.' (for ckcuni.c, or #other files) increase the '...' value in '-Wc,-Nw...'! The default maximum #switch table stack (-Nw) is 250 table entries. ckcuni.c from Oct 16 2009 #needs 257 table entries (C-Kermit Version "9.0.299"). #OK: 2010/03/26 hpux0650: @$(MAKE) hpux-header @MESSAGE2=$${MESSAGE2:-'and NO network'}; \ echo "supporting: NO long filenames $$MESSAGE2." $(MAKE) KTARGET=$${KTARGET:-$(@)} \ ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \ ckuusr.$(EXT) ckuxla.$(EXT) ckcftp.$(EXT) ckcpro.$(EXT) \ "CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \ -DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV -DNOLEARN -DNOLONGLONG \ $(KFLAGS)" $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \ -DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV -DNOLEARN -DNOLONGLONG \ $(KFLAGS) -Wc,-Nw260 $(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm $(LIBS)" #Exactly as above, plus curses: #OK: 2009/10/06 hpux0650c: @MESSAGE2="and NO network but with curses" \ $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = -DCK_CURSES $(KFLAGS)" \ "LIBS = -lcurses" #Exactly as above, plus curses + network: #OK: 2009/10/02 hpux0650tcpc: @MESSAGE2="but with curses and with TCP/IP" \ $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DCK_CURSES -DTCPSOCKET -DNOHADDRLIST \ -DINTSELECT -DNOCKGETFQHOST $(KFLAGS)" \ "LIBS=-lcurses" #Exactly as hpux0650 but with compiler optimization: #OK: 2009/10/06 hpux0650o: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #Exactly as hpux0650c but with compiler optimization: #OK: 2009/10/06 hpux0650oc: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0650c KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #Exactly as hpux0650tcpc but with compiler optimization: #OK: 2009/10/06 hpux0650otcpc: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0650tcpc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #Take this as startup entry for all 'non-optimized' files under HP-UX 7.x! #Make sure we don't call it with the '-O' option because this will blow up #the compiler! #OK: 2009/09/30 hpux0700noopt: @case "$(CFLAGS)" in \ *-O*) echo "Don't use CFLAGS= -O here!" ;; \ *) $(MAKE) KTARGET=$${KTARGET:-$(@)} \ ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \ ckuus6.$(EXT) ckuus7.$(EXT) ckuxla.$(EXT) \ ckcuni.$(EXT) ckcftp.$(EXT) ckcpro.$(EXT) \ ;; \ esac #HP-UX 7.0, no long filenames, no network support, no curses. #If you get compiler warnings like: #'Switch table overflow. Try the -Wc,-Nw option.' (for ckcuni.c, or #other files) increase the '...' value in '-Wc,-Nw...'! The default maximum #switch table stack (-Nw) is 250 table entries. ckcuni.c from Oct 16 2009 #needs 257 table entries (C-Kermit Version "9.0.299"). #OK: 2010/10/26 hpux0700sf: @$(MAKE) hpux-header @echo 'supporting: NO long filenames, NO network, NO curses.' $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \ -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260" $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \ -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260 $(OFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lm $(LIBS)" #Exactly as hpux0700sf but with compiler optimization: #OK: 2009/09/30 hpux0700osf: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0700sf KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #HP-UX 7.0, short filenames, but with tcp/ip and curses. #To use this, you must have bought the ARPA Services Product from HP, and you #must have /usr/lib/libBSD.a. # #If you get compiler warnings like: #'Symbol table overflow. Try the -Wc,-Ns option.' (as for ckuus4.c or #other files) increase the '...' value in '-Wc,-Ns...'! The default maximum #symbol table size (-Ns) is 2000 table entries. ckuus4.c from Mar 12 2010 #needs 2031 table entries (C-Kermit Version "9.0.299"). #OK: 2010/03/24 hpux0700sftcpc: @$(MAKE) hpux-header @echo 'supporting: NO long filenames, \c' @echo 'but with networking, curses, HDB uucp...' $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \ -DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \ -DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \ -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040" $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \ -DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \ -DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \ -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040 $(OFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lm -lBSD -lcurses" #Exactly as above but with compiler optimization: #OK: 2009/09/30 hpux0700osftcpc: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0700sftcpc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #HP 9000 series 300/800 HP-UX 7.0, long filenames, network support, HDB uucp, #but NO curses. See comments in hpux0700sftcpc about TCP/IP support. # #If you get compiler warnings like: #'Symbol table overflow. Try the -Wc,-Ns option.' (as for ckuus4.c or #other files) increase the '...' value in '-Wc,-Ns...'! The default maximum #symbol table size (-Ns) is 2000 table entries. ckuus4.c from Mar 12 2010 #needs 2031 table entries (C-Kermit Version "9.0.299"). #OK: 2010/03/24 hpux0700lfn: @$(MAKE) hpux-header @echo 'supporting: long filenames, networking, HDB uucp$(MESSAGE2)...' $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \ -DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \ -DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \ -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040" $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \ -DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \ -DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \ -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040 $(OFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)" #Exactly as above + curses. #OK: 2009/09/30 hpux0700lfnc: @MESSAGE2=', curses' \ $(MAKE) hpux0700lfn KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = -DCK_CURSES $(KFLAGS)" \ "LIBS = -lcurses" #Exactly as above hpux0700lfn but with compiler optimization: #OK: 2009/09/30 hpux0700olfn: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0700lfn KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #Exactly as above hpux0700lfnc but with compiler optimization: #OK: 2009/09/30 hpux0700olfnc: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0700lfnc KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #HP 9000 Series 300 or 400, HP-UX 8.0, long filenames and TCP/IP support. #This one should also work on 700/800, but without PA-specific optimization. #In case -DCK_RTSCTS and -DCK_REDIR make trouble, remove them. #NOTE: ckcpro.c, ckuusr.c and ckuus3.c blow up the optimizer, so don't optimize #them. #For HP-UX 8.0 on Motorola CPUs, you might have to reinstall your kernel with #maxdsiz >= 0x03000000. But if physical memory is small, that still will not #help much. #OK: 2009/10/01 hpux0800: @$(MAKE) hpux-header @MESSAGE3=$${MESSAGE3:='TCP/IP'}; \ echo "supporting: long filenames, $$MESSAGE3, HDB UUCP$(MESSAGE2)..." $(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" KTARGET=$${KTARGET:-$(@)} \ ckcpro.$(EXT) ckuusr.$(EXT) ckuus3.$(EXT) \ "CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \ -DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \ -DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \ -DNOLONGLONG $(KFLAGS)" $(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \ -DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \ -DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \ -DNOLONGLONG -DNODCLENDUSERSHELL $(KFLAGS) $(OFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)" #Exactly as above hpux0800 + curses. #OK: 2009/10/01 hpux0800c: @MESSAGE2=', curses' \ $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) -DCK_CURSES" "LIBS = -lcurses" #HP 9000 HP-UX 8.0, no TCP/IP because /usr/lib/libBSD.a can't be found, #or TCP/IP header files missing. #OK: 2009/10/01 hpux0800notcp: @MESSAGE3='NO network, NO curses' \ $(MAKE) "MAKE=$(MAKE)" hpux0800 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) -UTCPSOCKET" #Now the same as above hpux0800 but with compiler optimization #OK: 2009/10/01 hpux0800o: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #Exactly as above hpux0800 + curses and with compiler optimization. #OK: 2009/10/01 hpux0800oc: @MESSAGE1="with compiler optimization" \ $(MAKE) hpux0800c KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" "LIBS = -lcurses" #Exactly as above hpux0800notcp but with compiler optimization #OK: 2009/10/01 hpux0800onotcp: @MESSAGE1="with compiler optimization" \ $(MAKE) "MAKE=$(MAKE)" hpux0800notcp KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS)" "OFLAGS = -O" #HP 9000 Series 700 or 800, HP-UX 8.0, long filenames and TCP/IP support. # Like the previous entries, but with PA-RISC-specific optimization. #OK: 2009/10/01 hpux0800pa: @MESSAGE1="with PA-RISC-specific optimization" \ $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) +Obb1100" #As above, but with curses. #OK: 2009/10/01 hpux0800pac: @MESSAGE1="with PA-RISC-specific optimization" \ $(MAKE) hpux0800c KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) +Obb1100" #As above, but compiled with GCC 2.3.3. #OK: 2009/10/01 hpux0800pagcc: @MESSAGE1='using the gcc compiler' \ $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \ "CC=gcc" "CC2=gcc" "KFLAGS = -funsigned-char $(KFLAGS)" #HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully #configured. Use this entry with the restricted compiler: no optimization, no #ANSI support. If you get unresolved sockets library references at link time, #then try adding -lBSD to LIBS, or else remove -DTCPSOCKET to build a version #without TCP/IP support. # #Please note that we have to add the compiler option +DA1.0/+DA1.1 to avoid #core-dumps for large arguments in IF MATCH. The man page says these options #are default but C-Kermit dumps core without them! Therefore keep them #untouched. If you want to overwrite or disable the +DA1.0/+DA1.1 option use #'make hpux0900 OFLAGS=...'. An other possibility would be to create a new #kernel with maxssiz >= 0x01185000 (default maxssiz=0x00800000). #OK: 2009/09/24 hpux0900: @MESSAGE1A='. Read hpux0900 entry comments if you have trouble.' \ $(MAKE) hpux-header @case `uname -m` in \ */[34]*) KFLAGS='-DNOLONGLONG $(KFLAGS)' ;; \ */7*) AFLAGS='+DA1.1' ;; \ */8*) AFLAGS='+DA1.0' ;; \ esac ; \ OFLAGS=$${OFLAGS:-$$AFLAGS} ; \ $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT -DUTIMEH \ -DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \ -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \ -DNODCLENDUSERSHELL $$KFLAGS $$OFLAGS" \ "LNKFLAGS = -s" "LIBS = -lm -lcurses" "CC=$(CC)" "CC2=$(CC2)" #Like hpux0900, but for the "value-added" compiler on all HP 9000 models. #Adds optimization and ANSI compilation: # +O2 makes smaller executable (= -O = Level-1 and global optimization) # +O3 adds interprocedural global optimization, makes bigger executable. # Please note: To support long-long we would need compiler switch '-Ae' but # this one works only on Risc systems. But the equivalant compiler flags # '-Aa -D_HPUX_SOURCE +e' works for Motorola and Risc. # If optimization fails on some modules, you can add: # +Obb, +Olimit , or +Onolimit, depending on your cc version, # where is a number, e.g. +Obb1200. In other words, if you get optimizer # warnings, add (for example) +Obb1200; if you still get optimizer warnings, # increase the number. Repeat until warnings go away. If your compiler # permits it, use +Onolimit. If optimizer blows up on ckcpro.c, see next entry. # Reportedly, on some configurations, such as HP9000/425e or /340, perhaps # depending on the amount of main memory, this entry might fail no matter what # you do ("Out of Memory", "cc: Fatal error in /lib/c.c1", etc). In that case # use "make hpux0900" (no "o"). #OK: 2009/09/24 hpux0900o: @MESSAGE1=$${MESSAGE1:-"with compiler optimization"} \ $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2 +e" # For HP-UX 9.0 on Motorola CPUs, optimization of ckcpro.c tends to blow up # the compiler. You might have to reinstall your kernel with maxdsiz >= # 0x03000000. But if physical memory is small, that still will not help much. # In that case, use this entry to skip optimization of ckcpro.c. But for # C-Kermit 8.0.208 you need a kernel with maxdsiz >= 0x02000000 to compile an # optimized ckcftp.c. # Please note: To support long-long we would need compiler switch '-Ae' but # this one works only on Risc systems. But the equivalant compiler flags # '-Aa -D_HPUX_SOURCE +e' works for Motorola and Risc. hpux0900m68ko: @MESSAGE1='without compiler optimization for ckcpro.$(EXT) ...' \ $(MAKE) hpux-header $(MAKE) ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) \ ckcftp.$(EXT) ckcpro.$(EXT) \ "CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT \ -DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \ -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT $(KFLAGS)" @echo @MESSAGE1="with compiler optimization for the rest" \ $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2 +e" # Old name for hpux0900m68ko. hpux0900mot: $(MAKE) hpux0900m68ko KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS)" #Like hpux0900o but with additional model-700/800-specific optimizations. # +ESlit = consolidate strings in read-only memory. # +ESfsc = inline millicode calls when comparing pointers. hpux0900o700: @echo 'If you get optimizer warnings \c' @echo 'try "make hpux0900o700 KFLAGS=+Obb1200"' @MESSAGE1="with PA-RISC-specific optimizations" \ $(MAKE) hpux0900o KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) +ESlit +ESsfc" #HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully #configured, built with gcc, all models except 800 series. #You might need to add the include path for gcc headers, for example: # 'KFLAGS=-I/usr/gnu/lib/gcc-lib/hppa1.1-hp-hpux/2.4.5/include/' hpux0900gcc: @MESSAGE1='using the gcc compiler' \ $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "KFLAGS = -DCK_ANSIC $(KFLAGS)" \ "OFLAGS = -funsigned-char -O2 $(OFLAGS)" #HP-9000 HP-UX 10.0 + TCP/IP + curses, fully configured. #Use with restricted (bundled) compiler: no optimization, no ANSI support. #libcurses needed for fullscreen file xfer display in HP-UX 10.00 and 10.01. #libHcurses (NOT libcurses!) for fullscreen display, to work around fatal bugs #in HP-UX 10.10 and 10.20 curses. Maybe we could use lcurses for 10.30, since #the 10.10 curses problem is supposedly fixed in 10.30. # +DA1.0 = Generate PA-RISC 1.0 code that runs on both 700 and 800 models. # +DA1.1 = Generate PA-RISC 1.1 code that runs on both 700 and 800 models. # Note that HP-UX 10.20 and upwards do not support PA-RISC 1.0 systems. # And that as of Dec 2001, 11.00 and 11.11 are PA-only and 11.20 is IA64-only. # Later 11.2x releases are expected to be for both. Architecture can be # determined with the model command, at least in 10.20 and later... #For future releases, we need to include +DA1.1 for PA builds, so that a #binary built on PA 2.0 will still work on PA 1.1 machines, whereas +DA1.1 #must NOT be included for IA64 builds. #4 Jan 2006 - Added Large File Support (LFS). Large files (>2GB) are #possible in HP-UX 10.20 and later. The only change is to add: # -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 #to KFLAGS. These should be harmless in 10.00 and 10.10, if any of examples #of those still exist, but I have no way to test this hypothesis. #OK: 2009/11/16 hpux1000: @$(MAKE) hpux-header @LIBS='-lHcurses' ; \ AFLAGS='+DA1.1' ; \ case `uname -r` in \ [AB].10.0*) KFLAGS='-DHPUX1000 $(KFLAGS)' ; \ AFLAGS='+DA1.0' ; LIBS='-lcurses' ;; \ [AB].10.1*) KFLAGS='-DHPUX1010 -D__HP_CURSES $(KFLAGS)' ; \ ;; \ [AB].10.2*) KFLAGS='-DHPUX1020 -D__HP_CURSES $(KFLAGS)' ; \ ;; \ [AB].10.3*) KFLAGS='-DHPUX1030 -D__HP_CURSES $(KFLAGS)' ; \ ;; \ [AB].10.?*) KFLAGS='-DHPUX10XX -D__HP_CURSES $(KFLAGS)' ; \ ;; \ [AB].11.0*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \ ;; \ [AB].11.1*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \ ;; \ [AB].11.?*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \ AFLAGS='' ; LIBS='-lcurses' ;; \ esac ; \ OFLAGS=$${OFLAGS:-$$AFLAGS} ; \ $(MAKE) "SHELL=/usr/bin/sh" xermit KTARGET=$${KTARGET:-$(@)} \ "CC=$(CC)" "CC2=$(CC2)" \ "CFLAGS = -DHPUX10 -DDIRENT -DSTERMIOX -DCK_DSYSINI -DHDBUUCP \ -DCK_CURSES -DCK_WREFRESH -DTCPSOCKET -DCK_REDIR -DRENAME -DFNFLOAT \ -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 \ $$KFLAGS $$OFLAGS" \ "LNKFLAGS=-s $(LNKFLAGS)" "LIBS = -lm $$LIBS $(KLIBS)" # This is a kludge, copying hpux0900gcc and adapting hpux1000 # (add CC and CC2, drop the A1.[0||1]) # Builds w/ no compiler warnings but minimally tested. # #OK: 2009/09/21 hpux1000gcc: @MESSAGE1="using the gcc compiler $(MESSAGE1)" \ $(MAKE) hpux1000 KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \ "KFLAGS = $(KFLAGS)" "OFLAGS = -DCK_ANSIC -funsigned-char -O2" # Trusted HP-UX 10 # echo KFLAGS=$(KFLAGS) YTARGET YTARGET=$(YTARGET) $(XTARGET) ; hpux1000t: @case "$(KTARGET)" in \ *+openssl | *+ssl) \ KENTRY=hpux1000o+openssl ;; \ *gcc) \ KENTRY=hpux1000gcc ;; \ *o+) KENTRY=hpux1000o+ ;; \ *o) KENTRY=hpux1000o ;; \ *) KENTRY=hpux1000 ;; \ esac ; \ MESSAGE1="and support for 'Trusted HP-UX'" \ $(MAKE) $$KENTRY KTARGET=$${KTARGET:-$(@)} \ "KFLAGS = $(KFLAGS) -DHPUX10_TRUSTED" "KLIBS=-lsec" hpux1000to: $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)} hpux1000to+: $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)} hpux1000tgcc: $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)} hpux1000to+ssl hpux1000to+openssl: $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)} hpux1000tgcc+ssl hpux1000tgcc+openssl: $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)} #HP-9000 HP-UX 10.00 and higher with ANSI prototyping and optimization. #PA-RISC only, no Motorola or other hardware is support in HP-UX 10.00++. #The unbundled optional compiler is required. #Your path should start with /opt/ansic/bin. # -Wl,-Fw = Remove stack unwind table (info used by debuggers). # +O2 makes a smaller executable (= -O = Level-1 and global optimization). # +O3 adds interprocedural global optimization, makes a bigger executable. # +Onolimit allows all modules to be optimized, no matter how complex. But: # (a) +Onolimit does not seem to always be there in HP-UX 10.00, and: # (b) some modules might take hours on low-memory and/or slow systems. # The following are PA-RISC-specific optimizations: # +ESlit = Consolidate strings in read-only memory. # +ESfsc = Inline millicode calls when comparing pointers. # You might need to configure your kernel for a maxdsiz of 0x0B000000 (176MB) # or greater to prevent the optimizer from running out of space. # December 2001: +ESlit +ESsfc removed because not supported on IA64. # Somebody who cares can use 'model' to see whether it's PA-RISC or IA64 # and include the architecture-specific optimization flags. Also note: # +DA1.1 is PA-only. If this is included in in HP-UX 11.00 or later, # then +DS2.0 should be included too (but don't use +DS2.0 without +DA1.1, # or else the binary won't run on older PA hardware). #OK: 2009/09/21 hpux1000o: @case `uname -m` in \ ia64) ;; \ *) MFLAGS='+ESlit +ESsfc' ;; \ esac ; \ MESSAGE1="with PA-RISC-specific optimizations $(MESSAGE1)" \ $(MAKE) "SHELL=/usr/bin/sh" "PATH=/opt/ansic/bin:$$PATH" hpux1000 \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS) \ -Ae -D_HPUX_SOURCE -DCK_ANSIC -DUTIMEH \ +O2 -Wl,-Fw $$MFLAGS" #Like hpux1000o but with "+Onolimit". #On 700 series set kernel parameter maxdsiz >= 0x0D000000 (=208MB). #Takes a long time. hpux1000o+: @MESSAGE1="and +Onolimit $(MESSAGE1)" KTARGET=$${KTARGET:-$(@)} \ $(MAKE) hpux1000o \ "KFLAGS = $(KFLAGS) +Onolimit" #HP-UX 10.xx + 11.xx with optimizing ANSI compiler and OpenSSL. #Define SSLLIB and SSLINC appropriately for your OpenSSL installation. #To overwrite the default SSLLIB and SSLINC settings you can also use the #command-line variable KSSLLIB and KSSLINC like: #make hpux1000o+openssl KSSLLIB=-L/opt/openssl/lib KSSLINC=-I/... #Ditto for the Zlib location. #This entry works for C-Kermit 8.0.206 on HP-UX 10.20 + 11.11 #with OpenSSL 0.9.6 + 0.9.7 #NOTE: an ANSI C compiler is required for the SSL interface. If you don't #have the HP Optimizing ANSI compiler, see the hpux1000gcc+openssl target #below. hpux1000o+ssl hpux1000o+openssl: @case "$(KTARGET)" in \ *gcc+*) \ KENTRY=hpux1000gcc ;; \ *) KENTRY=hpux1000o ;; \ esac ; \ case "$(KTARGET)" in \ *-zlib*) \ DZLIB= LZLIB= ;; \ *) DZLIB=-DZLIB LZLIB='-L/opt/zlib/lib -lz' ;; \ esac ; \ SSLINC=$${KSSLINC:-$(SSLINC)}; \ SSLLIB=$${KSSLLIB:-$(SSLLIB)}; \ MESSAGE1="and with OpenSSL $(MESSAGE1)" \ $(MAKE) $$KENTRY KTARGET=$${KTARGET:-$(@)} \ KFLAGS="-DCK_AUTHENTICATION -DCK_SSL -DOPENSSL_097 $$DZLIB \ $$SSLINC $(KFLAGS)" \ KLIBS="$(KLIBS) \ $$SSLLIB -lssl -lcrypto \ $$LZLIB \ " # Ditto but without Zlib: hpux1000o+ssl-zlib hpux1000o+openssl-zlib: @MESSAGE1="but without Zlib $(MESSAGE1)" \ $(MAKE) hpux1000o+ssl KTARGET=$${KTARGET:-$(@)} #HP-UX 10.00 or higher with OpenSSL 0.9.7. Compiled with gcc. #From Chris Chaney, NEC America Inc. His instructions: # (1) Install gcc version 3.2.3 & binutils version 2.13.2 # (used binary depot from http://hpux.cs.utah.edu/) # (2) Install gcc make version 3.80 from http://hpux.cs.utah.edu/ # # or: gcc 2.9.2000-12-1 from "Linux to hp-ux 11.0/11i porting kit version 1.0 # (2CD)" free from: http://www.software.hp.com # # (3) Install openSSL version 0.9.7b from http://www.software.hp.com # (4) Install flex version 2.5.4 from http://hpux.cs.utah.edu/ # (5) Install gmp version 3.1.1 from http://hpux.cs.utah.edu/ # #Note from Peter Eichhorn, assyst Munich. It works also without gcc make! hpux1000gcc+ssl hpux1000gcc+openssl: $(MAKE) hpux1000o+openssl KTARGET=$${KTARGET:-$(@)} # Ditto but without Zlib: hpux1000gcc+ssl-zlib hpux1000gcc+openssl-zlib: $(MAKE) hpux1000o+openssl-zlib KTARGET=$${KTARGET:-$(@)} # Same for HP-UX 11 hpux1100o+ssl hpux1100o+openssl: $(MAKE) hpux1000o+openssl KTARGET=$${KTARGET:-$(@)} #OK: 2009/09/26 hpux1100gcc+ssl hpux1100gcc+openssl: $(MAKE) hpux1000gcc+openssl KTARGET=$${KTARGET:-$(@)} hpux1100o+ssl-zlib hpux1100o+openssl-zlib: $(MAKE) hpux1000o+openssl-zlib KTARGET=$${KTARGET:-$(@)} hpux1100gcc+ssl-zlib hpux1100gcc+openssl-zlib: $(MAKE) hpux1000gcc+openssl-zlib KTARGET=$${KTARGET:-$(@)} # HP-UX 11 # Note: these are 32-bit builds even on IA64. # Adding +DD64 to CFLAGS produces 64-bit object files, # but the linker fails to find the needed 64-bit libs. #OK: 2009/09/26 hpux1100: $(MAKE) hpux1000 KTARGET=$${KTARGET:-$(@)} #OK: 2009/09/26 hpux1100o: $(MAKE) hpux1000o KTARGET=$${KTARGET:-$(@)} hpux1100o+: $(MAKE) hpux1000o+ KTARGET=$${KTARGET:-$(@)} #OK: 2009/09/26 hpux1100gcc: $(MAKE) hpux1000gcc KTARGET=$${KTARGET:-$(@)} # Trusted HP-UX 11 hpux1100t: $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)} hpux1100to: $(MAKE) hpux1000to KTARGET=$${KTARGET:-$(@)} hpux1100to+: $(MAKE) hpux1000to+ KTARGET=$${KTARGET:-$(@)} hpux1100tgcc: $(MAKE) hpux1000tgcc KTARGET=$${KTARGET:-$(@)} hpux1100to+ssl hpux1100to+openssl: $(MAKE) hpux1000to+openssl KTARGET=$${KTARGET:-$(@)} hpux1100tgcc+ssl hpux1100tgcc+openssl: $(MAKE) hpux1000tgcc+openssl KTARGET=$${KTARGET:-$(@)} #Regulus on CIE Systems 680/20 cie: @echo 'Making C-Kermit $(CKVER) for CIE Systems 680/20 Regulus...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DATTSV -DNOFILEH -DCIE -DNOLEARN $(KFLAGS) -O" "LNKFLAGS =" # Linux 1.2 or later with gcc, dynamic libraries, ncurses, TCP/IP. # # If your Linux system has curses rather than ncurses, use the linuxc # entry, or if that doesn't work, linuxnc. # # The Kermit "large memory model" is used by default to configure big packet # and script buffers, etc. For small-memory or limited-resource systems, # "make linux KFLAGS=-DNOBIGBUF". # # -DLINUXFSSTND (Linux File System Standard 1.2) gives UUCP lockfile /var/lock # with string pid. Remove this to get /usr/spool/uucp with int pid, used in # very early Linux versions. FSSTND 1.2 also says that the PID string in the # UUCP lock file has leading spaces. This is a change from FSSTND 1.0, which # used leading zeros. Add -DFSSTND10 to support FSSTND 1.0 instead of 1.2. # I hope subsequent editions of the file-system standard did not change these # again. # # Add -DOLINUXHISPEED (Old Linux High Speed support) to turn on an ugly kludge # in Linux 1.0 and earlier to support speeds of 57600 and 115200. Extremely # old Linux systems (pre-0.99pl15) will not support this. If OLINUXHISPEED is # not defined, then only the standard POSIX termios methods of setting the port # speed will be used, and in this case speeds can be as high as 460800 in most # modern Linux versions. # # -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at # least 0.99.14; if it causes trouble for you, remove it from the CFLAGS. # # -pipe removes the need for temp files - remove it if it causes trouble. # # -funsigned-char makes all characters unsigned, as they should have been # in the first place. # # Add -DCK_DSYSINI if you want a shared system-wide init file. # # See http://www.columbia.edu/kermit/ckubwr.html about -DNOCOTFMC. # Better still, should read the entire Linux section of that document. # # The "linuxa" entry can be referenced directly on LIBC systems, but not # GLIBC, where -lcrypt is required. The "make linux" entry should normally # be used for all builds on all Linux distributions unless you have special # requirements, in which case keep reading. CK_NEWTERM added after 7.0b04 # due to new complaints about ncurses changing buffering of tty. linuxa: @echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later...' @echo 'IMPORTANT: Read the comments in the linux section of the' @echo 'makefile if you have trouble.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -DLINUX -pipe -funsigned-char -DFNFLOAT -DCK_POSIX_SIG \ -DCK_NEWTERM -DTCPSOCKET -DLINUXFSSTND -DNOCOTFMC -DPOSIX \ -DUSE_STRERROR $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(LIBS) -lm" # As above but with profiling linuxp: $(MAKE) linuxa KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS) -pg" \ "LIBS=-pg -lcrypt -lresolv" #Linux. This entry should work for any Linux distribution on any platform, #32-bit or 64-bit, except for extremely ancient ones. Automatically detects: # . curses, ncurses, or no curses # . Old versus new pty handling (new == glibc 2.1++) # . Presence or absence of libcrypt.a and # . Presence or absence of libresolv.a # . Transitional Long File API for 32-bit platforms (SUS V2 UNIX 98 LFS). #Note: The HAVE_PTMX test was previously "if test -c /dev/ptmx" but this was #not sufficient for Debian 2.1, because although it had /dev/ptmx, it did not #have grantpt(), unlockpt(), or ptsname(), so has been changed to look for a #grantpt() prototype in the header files. Modified in 8.0.206 to allow for #libraries that contain .so's but no .a's, e.g. Mandrake 9.0. #HAVE_BAUDBOY added in 8.0.210 for Red Hat -- it's like AIX ttylock(). #Modified 17 Aug 2005 to use openpty() if available because the other stuff #dumps core in 64-bit ia64 and x86_64 builds. #Long file support for 32-bit builds added in 8.0.212 - if features.h contains #__USE_LARGEFILE64 then we set the flags that must be set before reading any #header files; on 32-bit platforms such as i386, this produces a 32-bit build #capable of accessing, sending, receiving, and managing long (> 2GB) files. #On 64-bit platforms, it does no harm. #As of 3 March 2009 we detect automatically if we have curses, ncurses, #or no curses at all. #Added HAVE_LOCKDEV as openSuSE >= 11.3 uses ttylock directly instead of #baudboy 2010/08/23 #OK: 2011/06/18 linux: @if test \ `grep grantpt /usr/include/*.h /usr/include/sys/*.h | wc -l` -gt 0; \ then if test -c /dev/ptmx; then HAVE_PTMX='-DHAVE_PTMX'; \ else HAVE_PTMX=''; fi; fi ; \ if test `grep openpty /usr/include/pty.h | wc -l` -gt 0; \ then HAVE_OPENPTY='-DHAVE_OPENPTY'; \ else HAVE_OPENPTY=''; fi ; \ HAVE_LIBCURSES=''; \ if test -f /usr/lib64/libncurses.so || \ test -f /usr/lib/libncurses.a || \ test -f /usr/lib/libncurses.so; then \ HAVE_LIBCURSES='-lncurses'; \ else if test -f /usr/lib64/libcurses.so || \ test -f /usr/lib/libcurses.a || \ test -f /usr/lib/libcurses.so; then \ HAVE_LIBCURSES='-lcurses'; fi; fi; \ HAVE_CURSES=''; \ if test -n '$$HAVE_LIBCURSES'; then \ if test -f /usr/include/ncurses.h; then \ HAVE_CURSES='-DCK_NCURSES -I/usr/include/ncurses'; \ else if test -f /usr/include/curses.h; then \ HAVE_CURSES='-DCK_CURSES'; \ fi; fi; fi; \ if test -f /usr/include/baudboy.h || test -f /usr/include/ttylock.h; \ then HAVE_LOCKDEV='-DHAVE_LOCKDEV' ; \ else HAVE_LOCKDEV='' ; fi ; \ if test -f /usr/include/baudboy.h ; \ then HAVE_BAUDBOY='-DHAVE_BAUDBOY' ; \ else HAVE_BAUDBOY='' ; fi ; \ $(MAKE) KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$$HAVE_CURSES $$HAVE_PTMX $$HAVE_LOCKDEV \ $$HAVE_BAUDBOY $$HAVE_OPENPTY \ `grep __USE_LARGEFILE64 /usr/include/features.h > /dev/null && \ echo '-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'` \ `if test -f /usr/include/crypt.h; then echo -DHAVE_CRYPT_H; fi` \ $(KFLAGS)" \ "LIBS=$(LIBS) $$HAVE_LIBCURSES \ `if test -n '$$HAVE_OPENPTY'; then echo -lutil; fi` \ `if test -f /usr/lib64/libresolv.a || test -f /usr/lib64/libresolv.so \ || test -f /usr/lib/libresolv.a || test -f /usr/lib/libresolv.so \ || test -f /usr/lib/i386-linux-gnu/libresolv.a \ || test -f /usr/lib/i386-linux-gnu/libresolv.so \ || ls /lib/x86_64-linux-gnu/libresolv.* > /dev/null 2> /dev/null; \ then echo -lresolv; fi` \ `if test -f /usr/lib64/libcrypt.a || test -f /usr/lib64/libcrypt.so \ || test -f /usr/lib/libcrypt.a || test -f /usr/lib/libcrypt.so \ || ls /lib/x86_64-linux-gnu/libcrypt.* > /dev/null 2> /dev/null; \ then echo -lcrypt; fi` \ `if test -f /usr/lib64/liblockdev.a || \ test -f /usr/lib64/liblockdev.so || \ test -f /usr/lib/liblockdev.a || \ test -f /usr/lib/liblockdev.so; \ then echo -llockdev; fi`" \ linuxa # Linux + Shadow passwords + PAM # OK 2011/06/18 linux+shadow+pam: @echo 'Making C-Kermit $(CKVER) for Linux+Shadow+PAM...' $(MAKE) linux KTARGET=$${KTARGET:-$(@)} \ KFLAGS="-DCK_SHADOW -DCK_PAM $(KFLAGS)" \ "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = -lpam" # Linux systems that have no . # (not tested in recent years, perhaps no longer needed) linuxns: $(MAKE) linux KTARGET=$${KTARGET:-$(@)} KFLAGS=-DNO_SYS_SELECT_H # Linux-script-only: # A minimum-size version for Linux that does only scripting and # serial communication -- no networks, no file transfer, no security. # OK 2011/06/18 linuxso: $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -DLINUX -pipe -funsigned-char -DPOSIX -DCK_POSIX_SIG \ -DLINUXFSSTND -DNOCOTFMC -DNOXFER -DNODEBUG -DNOCSETS -DNOHELP \ -DNONET -DMINIDIAL -DNOSCRIPT -DNOIKSD -DNOPUSH $(KFLAGS)" \ "LNKFLAGS = $(LNKFLAGS)" "LIBS = " # Secure targets for Linux. These work on RHAS4, RHEL4, and RHEL5, # unlike some of the older targets that follow. They hook into the main Linux # target so we pick up all the other new stuff - large files, baudboy.h, the # appropriate pty interface, etc. # Linux with Kerberos 5. # Use "make linux+krb5 KFLAGS=-DNO_KRB5_INIT_ETS" if necessary. #OK 2011/06/16 on Fedora 14 with: # make linux+krb5 "LIBS=$LIBS /lib/libk5crypto.so.3 /lib/libcom_err.so.2" # On RHEL5: make linux+krb5 -UCK_DES linux+krb5: @echo 'Making C-Kermit $(CKVER) for Linux with Kerberos 5...' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac; \ HAVE_DES=''; \ DES_LIB=''; \ if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \ ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes425'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ K5CRYPTO=''; \ if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \ K5CRYPTO='-lk5crypto'; \ else if ls /usr/lib/libk5crypto* > /dev/null 2> /dev/null; then \ K5CRYPTO='-lk5crypto'; \ else if ls /usr/lib64/libk5crypto* > /dev/null 2> /dev/null; then \ K5CRYPTO='-lk5crypto'; \ fi; fi; fi; \ COM_ERR=''; \ if ls /lib/libcom_err* > /dev/null 2> /dev/null; then \ COM_ERR='-lcom_err'; \ fi; \ GSSAPILIB='-lgssapi'; \ if ls /lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \ GSSAPILIB='-lgssapi_krb5'; \ else if ls /usr/lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \ GSSAPILIB='-lgssapi_krb5'; \ else K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \ if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \ GSSAPILIB='-lgssapi_krb5'; \ fi; fi; fi; \ $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "KFLAGS= -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 $$OPENSSLOPTION \ -DCK_ENCRYPTION $$HAVE_DES $(K5INC) $(K5INC)/krb5 \ -I/usr/include/et $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $$DES_LIB -lcrypto $$GSSAPILIB -lkrb5 \ $$K5CRYPTO $$COM_ERR $(LIBS)" ; \ if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \ echo ""; \ echo "If build failed try:"; \ echo ""; \ echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \ echo ""; \ fi # Linux with Kerberos 5 and Kerberos 4. # Use "make linux+krb5 KFLAGS=-DNO_KRB5_INIT_ETS" if necessary. # Add "KFLAGS=-UCK_DES" if failure messages look DES-related. # UNTESTED (because I can't find a box with Krb4 and Krb5 installed) linux+krb5+krb4: @echo 'Making C-Kermit for Linux with Kerberos 4 and Kerberos 5' $(MAKE) linux+krb5 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DKRB4 -DKRB524 $(KFLAGS)" "LIBS=$(LIBS) -lkrb4" # Linux with OpenSSL # In Linux, SSL libs are often in /lib or /usr/lib and so found by default. # This targets takes into account the DES library might or might not # exist. If it does exist, however, the target will require some editing # if its basename is not libdes425. - fdc Tue Sep 21 14:28:00 2010 # IMPORTANT: Some Linux platforms have DES libraries but they are missing # functions used by Kermit. In that case you will get fatal errors at # link time involving routines such as des_ecb3_encrypt, des_random_seed, # and des_set_odd_parity. In that case, "make linux KFLAGS=-UCK_DES" # There's a new warning at the end that should come out if this happens, # and that should not come out if it didn't. # linux+ssl linux+openssl linux+openssl+zlib+shadow+pam linux+openssl+shadow: @echo 'Making C-Kermit $(CKVER) for Linux+OpenSSL SSLLIB=$(SSLLIB)' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac; \ HAVE_DES=''; \ DES_LIB=''; \ if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \ ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes425'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_CAST $$HAVE_DES \ -DCK_SSL -DCK_PAM -DZLIB -DCK_SHADOW $$OPENSSLOPTION $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SSLLIB) -lssl $$DES_LIB -lcrypto -lpam -ldl -lz $(LIBS)" ; \ if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \ echo ""; \ echo "If build failed try:"; \ echo ""; \ echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \ echo ""; \ fi # Linux with Kerberos 5 and OpenSSL # OK 2011/05/16 # Add -UCK_DES if functions like des_ecb3_encrypt, es_random_seed, # come up missing at link time. linux+krb5+ssl linux+krb5+openssl: @echo 'Making C-Kermit $(CKVER) for Linux with Krb5 and OpenSSL...' @case `openssl version` in \ *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \ *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \ *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \ *) OPENSSLOPTION="" ;; \ esac; \ HAVE_DES=''; \ DES_LIB=''; \ if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \ ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \ DES_LIB='-ldes425'; \ HAVE_DES='-DCK_DES -DLIBDES'; \ echo "HAVE DES"; \ else echo "NO DES"; \ fi; \ K5CRYPTO=''; \ if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \ K5CRYPTO='-lk5crypto'; \ else if ls /usr/lib/libk5crypto* > /dev/null 2> /dev/null; then \ K5CRYPTO='-lk5crypto'; \ else if ls /usr/lib64/libk5crypto* > /dev/null 2> /dev/null; then \ K5CRYPTO='-lk5crypto'; \ fi; fi; fi; \ COM_ERR=''; \ if ls /lib/libcom_err* > /dev/null 2> /dev/null; then \ COM_ERR='-lcom_err'; \ fi; \ GSSAPILIB='-lgssapi'; \ if ls /lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \ GSSAPILIB='-lgssapi_krb5'; \ else if ls /usr/lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \ GSSAPILIB='-lgssapi_krb5'; \ else K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \ if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \ GSSAPILIB='-lgssapi_krb5'; \ fi; fi; fi; \ $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "KFLAGS= -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 \ -DCK_SSL -DCK_PAM -DZLIB -DCK_SHADOW $$OPENSSLOPTION $(SSLINC) \ -DCK_ENCRYPTION $$HAVE_DES $(K5INC) $(K5INC)/krb5 \ -I/usr/include/et $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SSLLIB) -lssl $$DES_LIB -lpam -lz \ -lcrypto $$GSSAPILIB -lkrb5 $$K5CRYPTO $$COM_ERR $(LIBS)" ; \ if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \ echo ""; \ echo "If build failed try:"; \ echo ""; \ echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \ echo ""; \ fi # ::BEGIN_OLD_LINUX_TARGETS:: # The remaining Linux entries are for special or customized builds. They have # not been generalized ("subroutinized") like the ones above. Ideally, we # should allow for every combination of libc vs glibc, gcc vs egcs, curses vs # ncurses, Kerberos IV vs Kerberos V vs SRP (in any combination), and so on. # The best way to do this is to set KFLAGS and LIBS values and then chain to # the main "linux" target, as in the examples just above. To skip past all of # these old targets (and there are many) search for ::END_OLD_LINUX_TARGETS:: # (after this line). #Sharp Zaurus SL-5500 - Linux based zsl5500: @echo 'Making C-Kermit $(CKVER) for Sharp Zaurus SL-5500...' @touch ckcpro.c @touch wart $(MAKE) linuxnc KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DZSL5500" \ "CC = gcc" "CC2 = gcc" #Mklinux DR3 has horrible bug in - see ckufio.c. mklinux: $(MAKE) KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DUTMPBUG" \ "LIBS=-lcrypt -lresolv" linuxa #LinuxPPC 1999 linuxppc: @echo 'Making C-Kermit $(CKVER) for LinuxPPC 1999...' @if test -f /usr/lib/libcrypt.a; then \ if test -f /usr/lib/libresolv.a; then \ $(MAKE) KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \ -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \ "LIBS=-lncurses -lresolv -lcrypt" linuxa ; \ else \ $(MAKE) KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \ -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \ "LIBS=-lncurses -lcrypt" linuxa ; \ fi \ else \ if test -f /usr/lib/libresolv.a; then \ $(MAKE) KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(NCURSES_CPP) \ -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \ "LIBS=-lncurses -lresolv" linuxa ; \ else \ $(MAKE) KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(NCURSES_CPP) \ -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \ "LIBS=-lncurses" linuxa ; \ fi \ fi # Like "make linux" but built with egcs rather than gcc. # If you get "Internal compiler error xxx, output pipe has been closed", # try removing -pipe. linuxegcs: @echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later with egcs...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = egcs" "CC2 = egcs" \ "CFLAGS = -O -DLINUX -pipe -funsigned-char \ -DPOSIX -DCK_POSIX_SIG -DCK_NCURSES -DNOCOTFMC \ -DTCPSOCKET -DLINUXFSSTND $(KFLAGS)" \ "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lncurses -lcrypt -lresolv" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1 (no K4 compatibility). linux+krb5-old: @echo 'Making C-Kermit $(CKVER) for Linux on Intel with Kerberos...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 \ -DCK_ENCRYPTION -DCK_DES -DCK_CURSES -DCK_POSIX_SIG \ -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H $(K5INC) $(K5INC)/krb5 \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) -lncurses -ltermcap -ldes425 -lkrb5 \ -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv" # Linux on Intel PC with SRP 1.7.4 using GNU MP, Krypto, and Eric Young's # DES library. Remove the -DCK_DES, -DLIBDES and -ldes if you do not have # Eric Young's# libdes.a installed. # linux+srp+gmp: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...' $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) \ -lncurses -ltermcap -lsrp -lgmp -ldes -lkrypto -lcrypt -lresolv" linux+srp+gmp+no-des: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP ...' $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP \ -DCK_ENCRYPTION -DCK_CAST \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) \ -lncurses -ltermcap -lsrp -lgmp -lkrypto -lcrypt -lresolv" linux+srp+gmp-export: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...' $(MAKE) srpmit-export KTARGET=$${KTARGET:-$(@)} \ "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DFNFLOAT \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) \ -lncurses -ltermcap -lsrp -lgmp -lkrypto -lcrypt -lm -lresolv" linux+srp+gmp+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...' $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ -DCK_PAM -DFNFLOAT $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) -lncurses -ltermcap -lsrp -lgmp -ldes -lkrypto \ -lcrypt -lpam -ldl -lm -lresolv" #Linux on Intel PC with SRP 1.7.4 built with OpenSSL for Big Number Math #and Cryptographic functionality. # linux+srp: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...' $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(SSLLIB) \ -lncurses -ltermcap -lsrp -lkrypto -lcrypto -lcrypt -lresolv" linux+srp+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...' $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ -DCK_PAM -DFNFLOAT $(SRPINC) $(SSLINC) $(KFLAGS)" \ "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(SSLLIB) -lncurses -ltermcap -lsrp -lkrypto \ -lcrypto -lcrypt -lpam -ldl -lm -lresolv" #Linux on Intel PC with SRP and SSL/TLS. # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility. #Remove -ltermcap if it causes trouble e.g. in Debian 2.2. #If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+srp+openssl: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(SSLLIB) \ -lncurses -ltermcap -lsrp -lssl -lkrypto -lcrypto \ -lcrypt -lresolv" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2 and SRP. # # libsrp.a should be build with GNU MP (libgmp.a) # instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with # standard distribution Linux libraries. # Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility. linux+krb5+krb4+srp: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB54+SRP...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SRPINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SRPLIB) \ -lncurses -ltermcap -lsrp -lgmp -lgssapi_krb5 -lkrypto \ -ldes -lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP and SSL/TLS. # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility. # Requires OpenSSL 0.9.6a or higher #If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+srp+openssl: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SRPLIB) $(SSLLIB) \ -lncurses -ltermcap -lsrp \ -lkrb4 -lssl -lkrypto -lcrypto \ -lkrb5 -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SSL/TLS. # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. #If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+openssl: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SSLLIB) \ -lncurses -ltermcap \ -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \ -lk5crypto -lgssapi_krb5 -lcrypt -lresolv" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1, SSL/TLS. # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+openssl+shadow: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_SHADOW \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SSLLIB) \ -lncurses -ltermcap \ -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \ -lk5crypto -lgssapi_krb5 -lcrypt -lresolv" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2, SSL/TLS. # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+openssl+zlib+shadow: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 -DZLIB \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_SHADOW \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SSLLIB) \ -lncurses -ltermcap \ -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \ -lk5crypto -lgssapi_krb5 -lcrypt -lresolv -lz" linux+krb5+krb4+srp-export: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...' $(MAKE) xermit-export KTARGET=$${KTARGET:-$(@)} \ "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SRPINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(K5LIB) \ -lncurses -ltermcap -lsrp -lgmp -lkrb4 -ldes425 -lkrb5 -lgssapi_krb5 \ -lcom_err -lk5crypto -lkrypto -lcrypt -lresolv" linux+krb5+krb4+srp+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ -DCK_PAM $(K5INC) $(K5INC)/krb5 $(SRPINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(K5LIB) \ -lncurses -ltermcap -lsrp -lgmp -ldes -lkrb4 -ldes425 -lkrb5 \ -lcom_err -lk5crypto -lgssapi_krb5 -lkrypto -lcrypt -lpam -ldl \ -lresolv" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP and SSL/TLS. # and PAM. # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+srp+openssl+pam-debug: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...' $(MAKE) xermit-debug KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ -w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG $(K5INC) $(K5INC)/krb5 \ $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \ -lncurses -ltermcap -lsrp -lkrb4 -lssl -lkrypto -lcrypto \ -lkrb5 -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv -lpam -ldl" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1, SRP and SSL/TLS. # and PAM. # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+srp+openssl+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \ -lm -lncurses -ltermcap -lsrp \ -lkrb4 -lssl -lkrypto -lcrypto -lgssapi_krb5 \ -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP, OpenSSL # with ZLIB and PAM # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+srp+openssl+zlib+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \ -lm -lncurses -ltermcap -lsrp \ -lkrb4 -lssl -lkrypto -lcrypto -lgssapi_krb5 \ -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP, OpenSSL # with ZLIB, Shadow Passwords, and PAM # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+srp+openssl+zlib+shadow+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \ -lm -lncurses -ltermcap -lsrp -lkrypto \ -lkrb4 -lssl -lcrypto -lgssapi_krb5 \ -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL # with Shadow Passwords, PAM # # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. linux+krb5+krb4+openssl+shadow+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL,...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SSLLIB) \ -lm -lncurses -ltermcap \ -lkrb4 -lssl -lcrypto -lgssapi_krb5 \ -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL # with ZLIB, Shadow Passwords, PAM # # libsrp.a should be build with OpenSSL # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility. # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS. linux+krb5+krb4+openssl+zlib+shadow+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SSLLIB) \ -lm -lncurses -ltermcap \ -lkrb4 -lssl -lcrypto -lgssapi_krb5 \ -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz" #Red Hat 9 - full install includes Kerberos 5 (4 compat), PAM, SSL. #Also works around bug in curses in which terminal goes dead after #returning from file-transfer display. Assumes OpenSSL 0.9.7 or later. redhat9: @echo "Building SECURE Kermit for Red Hat 9.0..." $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH90 -DOPENSSL_097 $(KFLAGS)" #Ditto plus SRP (which is not normally included with RH Linux). redhat9+srp: @echo "Building SECURE Kermit for Red Hat 9.0..." $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH90 -DOPENSSL_097 $(KFLAGS)" #For Red Hat AS 2.1 with OpenSSL redhat21+ssl: @echo "Building SECURE Kermit for Red Hat 2.1..." $(MAKE) linux+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS)" #Red Hat Linux 8.0 - full install includes Kerberos 5 (4 compat), PAM, SSL. #Also works around bug in curses in which terminal goes dead after #returning from file-transfer display. redhat80: @echo "Building SECURE Kermit for Red Hat 8.0..." $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH80 $(KFLAGS)" redhat80+srp: @echo "Building SECURE Kermit for Red Hat 8.0..." $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH80 $(KFLAGS)" #Red Hat Linux 7.3 - full install includes Kerberos 5 (4 compat), PAM, SSL. #Also works around bug in curses in which terminal goes dead after #returning from file-transfer display. redhat73: @echo "Building SECURE Kermit for Red Hat 7.3..." $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH73 $(KFLAGS)" redhat73+srp: @echo "Building SECURE Kermit for Red Hat 7.3..." $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH73 $(KFLAGS)" #Red Hat Linux 7.2 - full install includes Kerberos 5 (4 compat), PAM, SSL. #Also works around bug in curses in which terminal goes dead after #returning from file-transfer display. redhat72: @echo "Building SECURE Kermit for Red Hat 7.2..." $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH72 $(KFLAGS)" redhat72+srp: @echo "Building SECURE Kermit for Red Hat 7.2..." $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH72 $(KFLAGS)" #Red Hat Linux 7.1 - full install includes Kerberos 5 (4 compat), PAM, SSL. #Also works around bug in curses in which terminal goes dead after #returning from file-transfer display. redhat71: @echo "Building SECURE Kermit for Red Hat 7.1..." $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH71 $(KFLAGS)" redhat71+srp: @echo "Building SECURE Kermit for Red Hat 7.1..." $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \ KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH71 $(KFLAGS)" #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL # with ZLIB and PAM and Shadow passwords linux+krb5+openssl+zlib+shadow+pam: @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB5,SSL...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \ -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DCK_SHADOW -DHAVE_PTMX \ -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \ -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \ $(K5INC) $(K5INC)/krb5 $(SSLINC) \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \ "LIBS = $(K5LIB) $(SSLLIB) \ -lm -lncurses -ltermcap -lssl -lcrypto -lgssapi_krb5 \ -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz" linuxnotcp: $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DNONET $(KFLAGS)" # "make linuxnotcp" with lcc (see http://www.cs.princeton.edu/software/lcc) # lcc does not understand various gcc extensions: # "__inline__" -- can be eliminated by adding "-D__inline__=" # "__asm__ and "long long" -- in header files, should be surrounded by # "#ifndef(__STRICT_ANSI__)"/"#endif" # however, TCP requires some __asm__ functions, so cannot be compiled linuxnotcp-lcc: @echo 'Making C-Kermit $(CKVER) for Linux with lcc ...' @echo 'Read comments in makefile for additional information.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = lcc" "CC2 = lcc" \ "CFLAGS = -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG \ -UTCPSOCKET -DLINUXFSSTND -DNOLEARN $(KFLAGS)" \ "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap" # Linux 0.99.14 thru 1.0 with gcc, dynamic libraries, curses, TCP/IP. # For Linux 1.2 or later, use "make linux" (above). # # -DLINUXFSSTND (Linux File System Standard) gives UUCP lockfile /var/lock with # string pid. Remove this and get /usr/spool/uucp with int pid, which was used # in early Linux versions. # # If you get compiler errors regarding , add -DNOHISPEED. # # -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at # least 0.99.14; if it causes trouble for you, just remove it. # # -DCK_CURSES: Here we link with the regular curses library. But you should # be using ncurses. Internally, the ckuusx.c module includes , but # this really should be . Thus if you have the new curses # material, you should either install it with the standard names, or else # create symbolic links from the standard names to the new ones. If you get # compile-time errors complaining about data definitions in termcap.h, it # means you have new kernel material mixed with older libc header files. To # fix, add "#include " to the file. Or if all this is # too confusing, create a new makefile entry based on this one, but with # -DCK_CURSES removed from CFLAGS and the entire LIBS= clause removed. # # But wait, there's more. On most Linux systems, -ltermcap must be included # in LIBS. But on others, the linker complains that libtermcap can't be # found. In that case, try removing -ltermcap from LIBS=. # # But wait, there's more. The format of the PID string in the UUCP lockfile # changed between Linux FSSTND 1.0 and 1.2. In the earlier standard, it had # leading zeros; in the second, it has leading spaces. By default this entry # uses the newer standard. To force the older one, add -DFSSTND10. # # "The nice thing about the Linux standard is there are so many to choose from" # # NOTE: Remove -DBIGBUFOK for small-memory or limited-resource systems. linux10: @echo 'Making C-Kermit $(CKVER) for Linux 1.0 or earlier...' @echo 'IMPORTANT: Read the comments in the linux section of the' @echo 'makefile if you get compilation or link errors.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DLINUX \ -DTCPSOCKET -DLINUXFSSTND -DOLINUXHISPEED -DNOLEARN $(KFLAGS)" \ "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap" #This version was used for Linux prior to C-Kermit 6.0.192. #Now the "Linux File System Standard" is considered standard, ditto TCP/IP. linuxold: @echo 'Making C-Kermit $(CKVER) for Linux...' @echo 'For FSSTND-recommended UUCP lockfiles, use:' @echo ' make linux "KFLAGS=-DLINUXFSSTND".' @echo 'Read comments in makefile for additional options.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS = -O -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DNOLEARN \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap" # ::END_OLD_LINUX_TARGETS:: # LynxOS 2.2 with GCC compiler, TCP/IP and fullscreen display. # Probably also works with Lynx 2.1, and maybe even Lynx 2.0. # -X means use termios serial drivers rather than BSD4.3-style sgtty drivers. # If you have trouble with this, try "make bsd KFLAGS=-DNOFDZERO". lynx: @echo 'Making C-Kermit $(CKVER) for LynxOS 2.2 with TCP/IP' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS= -O -DPOSIX -DDIRENT -DSETREUID -DCK_CURSES -DTCPSOCKET \ -DCK_ANSIC -DLYNXOS -DNOLEARN" "LNKFLAGS = -X" "LIBS = -lcurses -lbsd" lynx22: $(MAKE) lynx KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)" # LynxOS 2.1 with GCC compiler 1.40 and TCP/IP. lynx21: @echo 'Making C-Kermit $(CKVER) for LynxOS 2.1 with TCP/IP' $(MAKE) kermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS= -O -DSETREUID -DTCPSOCKET -DCK_ANSIC -DBSD4 -DLYNXOS" \ "LIBS = -lbsd" #SCO Xenix 2.2.1 for IBM PC, XT, PS2/30, or other 8088 or 8086 machine #Should this not work, try some of the tricks from sco286. #NOTE: -DRENAME is omitted for early SCO Xenix releases because it didn't #exist, or its semantics were different from the later POSIX-compliant #version of rename(). sco86: @echo 'Making C-Kermit $(CKVER) for SCO Xenix/86...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOUNICODE -DNOLEARN \ $(KFLAGS) -Dunix -F 3000 -i -M0me" \ "LNKFLAGS = -F 3000 -i -s -M0me" "LIBS = -lx" #SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc. #Reportedly, this "make" can fail simply because of the size of this #makefile. If that happens, use "makeL", or edit out some of the #other entries. No debugging or character-set translation. sco286: @echo 'Making C-Kermit $(CKVER) for SCO Xenix/286...' @echo 'If make fails, try using makeL.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -xenix -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \ -DNOIKSD -DNODEBUG -DNOTLOG -DNOCSETS -DNOLEARN \ $(KFLAGS) -F 3000 -i -M2let16" \ "LIBS = -lx" "LNKFLAGS = -xenix -s -O -LARGE -F 3000 -i -M2let16" #SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc. #As above, but with HDBUUCP (This one might need fixing -- see sco286). sco286hdb: @echo 'Making C-Kermit $(CKVER) for SCO Xenix/286 with HDB UUCP...' @echo 'If make fails, try using makeL.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \ -DHDBUUCP -DNOIKSD -DNOUNICODE -DNOLEARN \ $(KFLAGS) -F 3000 -i -M2let32" \ "LIBS = -lx" "LNKFLAGS = -s -O -LARGE -F 3000 -i -M2let32" #SCO Xenix/386 2.2.2 and 2.2.3 sco386: @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.2...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOREDIRECT -DNOLEARN \ -Dunix -DRDCHK -DNAP -DNOUNICODE $(KFLAGS) -Otcl -M3e" \ "LNKFLAGS = -s" "LIBS = -lx" #SCO XENIX/386 2.2.3 with Excelan TCP/IP + curses. # NOTE: This one might need some work in C-Kermit 6.0. # You might need to include /usr/include/sys/types.h # containing "typedef char *caddr_t;". Then at least it compiles. sco386netc: @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.3 + Excelan TCP' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -I/usr/include/exos -DXENIX -DCK_CURSES -DNOUNICODE \ -Dunix -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC -DNOMKDIR -DNOFILEH \ -DNOLEARN -DNOREDIRECT -DNOIKSD -DNO_DNS_SRV $(KFLAGS) -Otcl -M3e" \ "LNKFLAGS = -s" "LIBS = -lc -lx -lsocket -lcurses -ltermcap" #SCO XENIX/386 2.3.3 with gcc 1.37 or later... sco386gcc: @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...' @echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \ -DNOJC -DNODEBUG -DNOUNICODE -DNOLEARN $(KFLAGS) \ -traditional -fpcc-struct-return -fstrength-reduce \ -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \ -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \ -DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD -DNOREDIRECT \ -DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx" #As above, but with curses... sco386gccc: @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...' @echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \ "CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \ -DNOJC -DNODEBUG -DCK_CURSES -DNOUNICODE -DNOLEARN $(KFLAGS) \ -traditional -fpcc-struct-return -fstrength-reduce \ -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOREDIRECT \ -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \ -DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD \ -DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx -lcurses -ltermlib" #SCO UNIX (and ODT) entries... # #NOTE: All SCO UNIX entry LIBS should have "-lc_s -lc -lx" IN THAT ORDER (if #shared C library is desired), or else "-lc -lx" IN THAT ORDER. Use shared C #libraries to save memory, but then don't expect to run the resulting binary #on a different machine. When using -lc_s, you must also use -lc, because the #shared C library does not contain all of libc.a. And in all cases, -lc must #ALWAYS precede -lx. # #ANOTHER NOTE: -DRENAME is included in all SCO UNIX entries. Remove it if it #causes trouble. No harm is done by removing it (see ckuins.txt). # #AND ANOTHER: In theory, it should be possible to run SCO UNIX binaries on #SCO Xenix 2.3 and later. In practice, this might not work because of the #libraries, etc. Also, don't add the -link -z switch (which is supposed to #root out references to null pointers) because it makes UNIX binaries core #dump when they are run under Xenix. #NOTE: -Otcl removed and replaced by -O, since -Otcl produced incorrect code. #SCO UNIX/386 3.2.0, 3.2.1, and SCO Xenix 2.3.x sco3r2: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.0 or 3.2.1 ...' @echo 'Warning: If make blows up, edit the makefile to join' @echo 'the following three continued lines into one line.' @echo 'Also, remove -DRENAME if _rename unresolved at link time.' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DNOLEARN \ -DRENAME -DNOIKSD -DNOJC $(KFLAGS) -O" \ "LNKFLAGS = -s" "LIBS = -lc -lx" #SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support. #In case of compilation or runtime problems, try adding #"-DUID_T=int -DGID_T=int" to the CFLAGS. If that doesn't work, try #"-DUID_T=uid_t -DGID_T=gid_t". sco3r2net: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH -DNOLEARN \ -DHDBUUCP -DRDCHK -DNAP -DRENAME -DTCPSOCKET -DEXCELAN -DNOJC \ -DNOIKSD -DNOREDIRECT $(KFLAGS) -O" \ "LNKFLAGS = -s" "LIBS = -lc -lx -lsocket" #SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support. #As above, with curses added. sco3r2netc: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan / curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH -DNOLEARN \ -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC $(KFLAGS) \ -DRENAME -DCK_CURSES -DNOREDIRECT -DNOIKSD -O" "LNKFLAGS = -s" \ "LIBS = -lc -lx -lsocket -lcurses -ltermcap" #SCO UNIX 3.2.x or SCO Xenix 2.3.x with Racal InterLan TCP/IP support # Extra compile flags for other version of Racal InterLan TCP/IP: # Xenix286/NP621-286, use -Ml -DPARAMH -DINTERLAN -Di286 -DSYSV # Xenix386/NP621-386, use -DPARAMH -DINTERLAN -Di386 -DSYSV # ISC386ix/NP622I, use -DSYSV -Di386 # SCO Unix3.2/NP622S, use -DSYSV -Di386 -DSCO_UNIX # AT&T SVR3.2/NP622A, use -DSYSV -Di386 -DATT sco3r2netri: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Racal InterLan...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -I/usr/include/interlan -DXENIX -DNOFILEH -DHDBUUCP \ -DSVR3 -DRDCHK -DNAP -DTCPSOCKET -DPARAMH -DINTERLAN -Di386 -DSYSV \ -DRENAME -DNOREDIRECT -DNOIKSD -DNOJC -DNOLEARN $(KFLAGS) -Otcl -M3e" \ "LNKFLAGS = -s" "LIBS = -lc -lx -ltcp" # SCO XENIX/386 2.3.3 SysV with SCO TCP/IP # System V STREAMS TCP developed by Lachman Associates Inc and # Convergent Technologies. # -DRENAME removed since some reports indicate it is not supported # (whereas others say it is.) sco3r2lai: @echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \ -DNAP -DTCPSOCKET -DPWID_T=int -DNOREDIRECT -DNOIKSD -DNOLEARN \ $(KFLAGS) -Otcl -i -M3e" \ "LNKFLAGS = -i -s" "LIBS = -lc -lx -lsocket" sco3r2laic: @echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \ -DNAP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DM_TERMINFO -DNOLEARN \ -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) -Otcl -i -M3e" \ "LNKFLAGS = -i -s" "LIBS = -ltinfo -lc -lx -lsocket" #SCO UNIX/386 3.2v2 (POSIX job control), shared libraries. sco3r22: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...' make wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \ -DNAP -DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOIKSD \ -DNOREDIRECT $(KFLAGS) -O" \ "LNKFLAGS = -s" "LIBS = -lc_s -lc -lx" #SCO UNIX/386 3.2v2, POSIX job control, fullscreen file transfer display, #dynamic memory allocation, shared C library sco3r22c: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...' @echo 'Warning: If make blows up, edit the makefile to join' @echo 'the following four continued lines into one line.' make wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DNOLEARN \ -DCK_CURSES -DDIRENT -DRENAME -DNOREDIRECT -DNOIKSD \ -DPID_T=pid_t -DPWID_T=int $(KFLAGS) -O" \ "LNKFLAGS = -s" "LIBS = -lcurses -lc_s -lc -lx" #SCO UNIX/386 3.2v2 with gcc 1.40 or later (POSIX job control) sco3r22gcc: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2, gcc' @echo 'Warning: If make blows up, edit the makefile to join' @echo 'the following seven continued lines into one line.' make wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \ "CFLAGS= -O -DPOSIX -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \ -DNOLEARN -DRENAME -traditional -fpcc-struct-return -fstrength-reduce \ -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \ -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \ -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \ -DPID_T=pid_t -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) " \ "LNKFLAGS = -s" "LIBS = -lc_s -lc -lx" #SCO UNIX/386 3.2v2 (ODT 1.1) (POSIX job control) with SCO TCP/IP, shared libs #Requires SCO TCP/IP or ODT development system for telnet.h, etc. sco3r22net: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.2 + TCP/IP...' @echo 'Warning: If make blows up, edit the makefile to join' @echo 'the following three continued lines into one line.' make xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET \ -DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOREDIRECT -DNOIKSD \ $(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lsocket -lc_s -lc -lx" #As above, but with curses for fullscreen file transfer display. #Requires SCO TCP/IP or ODT development system for telnet.h, etc. sco3r22netc: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 + TCP/IP...' @echo 'Warning: If make blows up, edit the makefile to join' @echo 'the following three continued lines into one line.' make xermit KTARGET=$${KTARGET:-$(@)} "CFLAGS= \ -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DRENAME \ -DCK_CURSES -DDIRENT -DNOIKSD -DNOREDIRECT \ -DPID_T=pid_t -DPWID_T=int -O $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx" #SCO XENIX 2.3.4, no curses, no TCP/IP, no IKSD. #This one built and tested in C-Kermit 7.0. #lcfp is C library floating-point support. #Use -M3 to generate 32-bit i386 code instead of 16-bit segmented i286 code. #Use -Me to enable MS nonstandard keywords in system headers. #Use -W2 or W3 to increase the warning level. #OK: 2011/06/15 sco234: @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \ -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \ -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DSCO234 -DDCLGETCWD $(KFLAGS) \ -Otcl" "LNKFLAGS = -s" "LIBS = -lcfp -lc -lx" #SCO XENIX 2.3.4, no TCP/IP, no IKSD, but with curses. # Built and tested in C-Kermit 7.0. # Note: XENIX 2.3.4 does not have newterm() so no point in adding -DCK_NEWTERM. sco234c: @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \ -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \ -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DCK_CURSES -DSCO234 \ -DDCLGETCWD $(KFLAGS) -Otcl" \ "LNKFLAGS = -s" "LIBS = -lcfp -lc -ltinfo -lx" #SCO XENIX 2.3.4 with SCO TCP/IP and curses, no IKSD. # Built and tested in C-Kermit 7.0. TCP/IP works and curses works. # Previous versions of this target included -lmalloc, but this caused "error: # " _calloc : symbol defined more than once" at link time so I removed it. # Results are likely to vary depending on exactly which version of the SDK # and TCP/IP SDK you have. sco234netc: @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + TCP + curses...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \ -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \ -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DCK_CURSES -DSCO234 \ -DDCLGETCWD -DTCPSOCKET -DNO_DNS_SRV $(KFLAGS) -Otcl" \ "LNKFLAGS = -s" "LIBS = -ltinfo -lsocket -lcfp -lc -lx" # SCO 3.2v4.x targets... # NOTE: Add -DDCLPOPEN and/or -DDCLFDOPEN to anySCO 3.2v4.x non-gcc entries # that complain about fdopen() or popen() at compile time. They compile OK # without these flags as of July 1999. However, the gcc entries seem to # need them, at least for gcc 2.7.2.2. # NOTE 2: To enable IKSD support, add: # -DCK_LOGIN -DNOGETUSERSHELL -DNOINITGROUPS # to CFLAGS (not tested). #SCO UNIX/386 3.2v4 (POSIX job control), curses, ANSI C compilation, # (EAFS) file system. Remove -lmalloc if it causes trouble. It was #put there to avoid core dumps caused by regular libc.a malloc. Add -J to make #all chars unsigned. This version uses select() for CONNECT and also has #high-precision timers and so might not work on non-TCP systems, in which case #sco32v4ns should be used instead. # If you get _ftime redefinition_ complaint, try adding -DODT30 to CFLAGS. sco32v4: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...' make xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \ -DNOANSI -DSELECT -DNOIKSD -DDCLGETCWD -NOLSTAT \ -DNOLINKBITS -DDCLGETCWD $(KFLAGS) -O" \ "LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lsocket -lc_s -lc -lx" # As above, but with no dependence on sockets library or select(). sco32v4ns: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...' @echo 'No select() and no sockets library.' make wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \ -DNOANSI -DNOIKSD -DNOGFTIMER -DCK_POLL -DNAP -DDCLGETCWD -DNOLSTAT \ -DNOLINKBITS -DDCLGETCWD -DNOLEARN -O $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lc_s -lc -lx" #SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation, # (EAFS) file system. With DIRENT, -lc must come before -lx. #Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s. #Requires SCO TCP/IP development system or ODT for telnet.h, etc. #See sco32v4 above for additional comments. #NOTE: No more room for -Dxxx -- 25 seems to be the limit. Move some to #ckcdeb.h or somewhere... sco32v4net: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...' @echo 'If you get _ftime redefinition_ complaint,' @echo 'use make sco-odt30.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES \ -DNAP -DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DNOLSTAT \ -DDCLGETCWD -DCK_SCO32V4 -DNOIKSD -O \ $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS) -s" \ "LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx" #SCO UNIX/386 3.2v4 with gcc 1.40 or later, POSIX job control. #Also see comments in sco32r4 entry. sco32v4gcc: make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \ "CFLAGS= -O -DNOFILEH -DHDBUUCP -DNOANSI -DCK_CURSES -DM_TERMINFO \ -traditional -fpcc-struct-return -fstrength-reduce -funsigned-char \ -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \ -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DSELECT -DNOLSTAT \ -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \ -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \ -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \ "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx" #SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation, #Requires SCO TCP/IP or ODT development system for telnet.h, etc. # (EAFS) file system. With DIRENT, -lc must come before -lx. #gcc 1.40 or later. Also see comments in sco32r4 entry. sco32v4netgcc: make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2=gcc" \ "CFLAGS= -O2 -DNOFILEH -DHDBUUCP -DSELECT -DNOLSTAT \ -DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \ -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \ -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DDCLGETCWD \ -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \ -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \ -DDCLPOPEN -DDCLFDOPEN $(KFLAGS)" \ "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx" #As above but with bgcc BOUNDS CHECKING (for developers only). -lcheck has #bounds-checking replacements for malloc, memcpy, bcopy, etc, so must come #before -lsocket and -lc. sco32v4netbgcc: make xermit KTARGET=$${KTARGET:-$(@)} \ "CC = bgcc -pipe -m386" "CC2=bgcc -pipe -m386" \ "CFLAGS= -O1 -g -DNOFILEH -DHDBUUCP -DSELECT \ -DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \ -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLSTAT \ -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOLINKBITS \ -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \ -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \ -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \ "LNKFLAGS = -g" "LIBS = -lcurses -lcheck -lsocket -lx" sco32v4netnd: @echo sco32v4net with no debug $(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)" sco3r2netnd: @echo sco32v4netnd built for SCO XENIX 2.3 under SCO UNIX... @echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and @echo getting /lib/386/Slibsocket.a from a XENIX devkit. @echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4 echo For earlier XENIX systems, replace CK_POLL with RDCHK. $(MAKE) "MAKE=$(MAKE)" sco32v4netnd KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \ "LNKFLAGS = $(LNKFLAGS) -x2.3" \ "LIBS=-ldir -lcfp $(LIBS)" #SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation, # (EAFS) file system. With DIRENT, -lc must come before -lx. #Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s. #Requires SCO TCP/IP development system or ODT for telnet.h, etc. #See sco32v4 above for additional comments. # Note: "xermit" means use the select() version of the CONNECT module. sco32v4netx: @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...' @echo 'If you get _ftime redefinition_ complaint,' @echo 'use make sco-odt30.' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DNAP \ -DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DDCLGETCWD \ -DCK_SCO32V4 -DNOIKSD -DNOLSTAT -O $(KFLAGS)" \ "LNKFLAGS = $(LNKFLAGS) -s" \ "LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx" sco32v4netndx: @echo sco32v4netx with no debug $(MAKE) "MAKE=$(MAKE)" sco32v4netx KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)" sco3r2netndx: @echo sco32v4netndx built for SCO XENIX 2.3 under SCO UNIX... @echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and @echo getting /lib/386/Slibsocket.a from a XENIX devkit. @echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4 echo For earlier XENIX systems, replace CK_POLL with RDCHK. $(MAKE) "MAKE=$(MAKE)" sco32v4netndx KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \ "LNKFLAGS = $(LNKFLAGS) -x2.3" \ "LIBS=-ldir -lcfp $(LIBS)" sco-odt30: @echo SCO ODT 3.0 $(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=$(KFLAGS) -DODT30" #SCO OpenServer 5.0 (SCO UNIX 3.2v5.0) with SCO development tools, no TCP/IP. #SCO OSR5 is much more like standard System V than previous SCO releases. #The SCO development tools include TCP/IP, so this target is only for creating #artificially limited versions of kermit required by site policy rather than #the operating system. NOSYSLOG is included because syslog() requires the #sockets library. sco32v500: @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \ -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DNOSYSLOG \ $(KFLAGS)" \ "LIBS=-lcurses $(LIBS)" "LNKFLAGS=$(LNKFLAGS)" sco32v5: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500 #SCO OpenServer 5.0 with networking, SCO development tools. #Networking libraries are now provided with the OS. sco32v500net: @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \ -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \ -DNO_DNS_SRV $(KFLAGS)" \ "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)" sco32v5net: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500net #SCO OpenServer 5.0 with networking and OpenSSL, SCO development tools. #Networking libraries are now provided with the OS. sco32v500net+ssl: @echo Making C-Kermit $(CKVER) for SCO OSR5 with OpenSSL... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \ -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \ -DNO_DNS_SRV -DCK_AUTHENTICATION -DCK_SSL -DCK_TRIGGER \ $(SSLINC) $(SSLLIB) $(KFLAGS)" \ "LIBS=$(SSLLIB) -lcurses -lsocket -lssl -lcrypto $(LIBS)" \ "LNKFLAGS=$(LNKFLAGS)" #SCO OpenServer 5.0 with gcc, no networking. #Note: NOSYSLOG required for non-net entries because it requires sco32v500gcc: @echo Using gcc... $(MAKE) "MAKE=$(MAKE)" sco32v500CC=gcc CC2=gcc \ KTARGET=$${KTARGET:-$(@)} "KFLAGS= $(KFLAGS)" #SCO OpenServer 5.0 with networking, gcc. sco32v500netgcc: @echo TCP/IP networking added - using gcc... $(MAKE) "MAKE=$(MAKE)" sco32v500net CC=gcc CC2=gcc \ KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)" #SCO OpenServer 5.0 with networking, gcc, elf. sco32v500netgccelf: @echo TCP/IP networking added - using gcc, dynamic elf library $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \ KTARGET=$${KTARGET:-$(@)} "KFLAGS=-O3 -belf" "LNKFLAGS=-belf" sco32v502: $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR502 $(KFLAGS)" #SCO OpenServer 5.0.2 with networking, SCO development tools. sco32v502net: @echo TCP/IP networking added... $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-b elf -DSCO_OSR502 $(KFLAGS)" #SCO OpenServer 5.0.4 (SCO UNIX 3.2v5.0.4) with SCO development tools. #Like 5.0, but adds high serial speeds. First POSIX-based SCO version. #Note: the -O flag is deliberately omitted for /bin/cc (= /usr/ccs/bin/cc). sco32v504: @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5.0.4... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \ -DSCO_OSR504 -b elf -DPOSIX \ -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DNOSYSLOG $(KFLAGS)" \ "LIBS=-lcurses $(LIBS)" "LNKFLAGS=$(LNKFLAGS)" #SCO OpenServer 5.0.4 with gcc, no networking. sco32v504gcc: @echo Using gcc... $(MAKE) "MAKE=$(MAKE)" sco32v504 "CC=gcc" "CC2=gcc" \ KTARGET=$${KTARGET:-$(@)} "KFLAGS= $(KFLAGS)" #SCO OpenServer 5.0.4 with networking. #SCO development tools (/bin/cc = /usr/ccs/bin/cc). #Optimization deliberately suppressed. sco32v504net: @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5.0.4... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \ -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \ -b elf -DSCO_OSR504 -DPOSIX -DNO_DNS_SRV $(KFLAGS)" \ "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)" #SCO OpenServer 5.0.4 with networking, gcc. sco32v504netgcc: @echo TCP/IP networking added - using gcc... @echo If gcc crashes on ckwart.c then build it by hand: @echo " gcc -o wart -DCK_SCOV5 ckwart.c" $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \ KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSCO_OSR504 -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.4 with networking, gcc, elf. sco32v504netgccelf: @echo TCP/IP networking added - using gcc, dynamic elf library $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR504 -DPOSIX -O3 -belf $(KFLAGS)" \ LNKFLAGS="-belf" #SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with SCO /bin/cc. #Like 5.0, but adds high serial speeds. First POSIX-based SCO version. #You might have to add "LIBS=-ltinfo" (some do, some don't). sco32v505: $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with SCO UDK. #This one can't see the high serial speeds and anything to do with modem #signals doesn't work because UKD cc has its own alternative universe of #header files. sco32v505udk: $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DDCLTIMEVAL -DNOSHADOW -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.5 with networking, SCO /bin/cc. #See comments with sco32v505 targets. sco32v505net: @echo TCP/IP networking added... $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.5 with networking and OpenSSL, SCO /bin/cc. #See comments with sco32v505 targets. sco32v505net+ssl: @echo TCP/IP networking and OpenSSL added... $(MAKE) "MAKE=$(MAKE)" sco32v500net+ssl KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS) " \ "LIBS=$(SSLLIB) -lcurses -lsocket -lssl -lcrypto $(LIBS)" \ "LNKFLAGS=$(LNKFLAGS)" #SCO OpenServer 5.0.5 with networking, SCO UDK. #See comments with above sco32v505 targets. sco32v505udknet: @echo TCP/IP networking added... $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DDCLTIMEVAL -DNOSHADOW -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.5 with gcc, no networking. sco32v505gcc: @echo Using gcc... $(MAKE) "MAKE=$(MAKE)" sco32v500 "CC=gcc" "CC2=gcc" \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char $(KFLAGS)" #SCO OpenServer 5.0.5 with gcc, no networking, no shadow passwords. sco32v505xgcc: @echo Using gcc... $(MAKE) "MAKE=$(MAKE)" sco32v500 "CC=gcc" "CC2=gcc" \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DNOSHADOW -DPOSIX -funsigned-char $(KFLAGS)" #SCO OpenServer 5.0.5 with networking, gcc. sco32v505netgcc: @echo TCP/IP networking added - using gcc... @echo If gcc crashes on ckwart.c then build it by hand: @echo " gcc -o wart -DCK_SCOV5 ckwart.c" $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \ KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DNOSHADOW -DPOSIX -funsigned-char $(KFLAGS)" #egcs is just like gcc but generates ELF by default. #Or you can include -melf (not -belf) to force it. sco32v505netegcs: $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v505netgcc \ KTARGET=$${KTARGET:-$(@)} #SCO OpenServer 5.0.5 with networking, gcc, elf. sco32v505netgccelf: @echo TCP/IP networking added - using gcc, dynamic elf library $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \ "KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char -O3 -belf $(KFLAGS)" \ KTARGET=$${KTARGET:-$(@)} LNKFLAGS="-belf" #SCO OpenServer 5.0.6 with SCO /bin/cc. # Add -DDCLTIMEVAL when building with UDK. #Like 5.0.5. IMPORTANT: Use sco32v506a target for 5.0.6a. sco32v506: $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.6 with networking, SCO /bin/cc. # Add -DDCLTIMEVAL when building with UDK. # IMPORTANT: Use sco32v506a target for 5.0.6a. sco32v506net: @echo TCP/IP networking added... $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.6a, no networking, SCO development tools. #This one has patched sio drivers that, for the first time, #actually handle modem signals correctly. # Add -DDCLTIMEVAL when building with UDK. sco32v506a: $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR506A -DNEEDMDMDEFS \ -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.6a with networking, SCO development tools. # Add -DDCLTIMEVAL when building with UDK. sco32v506anet: @echo TCP/IP networking added... $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR506A -DNEEDMDMDEFS \ -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.7, no networking, SCO development tools. #Adds flags to make PTY and SSH commands work. These have been tested #only in 5.0.7 but probably they can also be added to earlier OSR5 targets. sco32v507: $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \ -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT \ -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 5.0.7 as above but with networking. sco32v507net: @echo TCP/IP networking added... $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \ "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \ -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT \ -b elf -DPOSIX $(KFLAGS)" #SCO OpenServer 6 (new target 30 Jan 2006) sco_osr600 sco600: @echo Making C-Kermit $(CKVER) for SCO OpenServer 6.0.0... $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \ -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \ -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \ -DNO_DNS_SRV -DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \ -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT -DDCLTIMEVAL \ -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 \ -DSOCKOPT_T=socklen_t -DGSOCKNAME_T=size_t -DGPEERNAME_T=size_t \ -DHERALD=\"\\\" SCO OpenServer `uname -v`\\\"\" \ -b elf -DPOSIX $(KFLAGS)" \ "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)" #Tandy 16/6000 with Xenix 3.0 (16 bits) #C-Kermit 7.0 (and later) do not build here; "too many defines". #Add more -DNOxxx options to remove features if program won't load. #Successful operation is a function of program size, physical memory, #available swap space, etc. The following stripped-down configuration #seems to work on most Tandy 6000s. NOTE: "-+" means allow long variable #names, needed for C-Kermit 6.0 because some identifiers are not unique #within the first six characters. trs16: @echo 'Making C-Kermit $(CKVER) for Tandy 16/6000, Xenix 3.0...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -+ -DATTSV -DTRS16 -DNOMKDIR -DDCLPOPEN -DCK_CURSES \ -DNODEBUG -DNOTLOG -DNOHELP -DNOSCRIPT -DNOCSETS -DNOIKSD \ -DNOREDIRECT -DNOSYSLOG -DNOPUTENV -DNOREALPATH -DNOLEARN \ $(KFLAGS) -O" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -+ -n -s" # QNX 4.21 and above, 32-bit version, Watcom C32 10.6, fully configured, # except no job control because QNX 4.x does not support it. New NCURSES # library used instead of CURSES. # # -Oatx optimizes to favor speed over size: loop optimization, inline fn's. # -Os favors size over speed. Saves 30-40K out of about 1.75M. # -3r = generate 386 code with register-based arg passing. # -3s = generate 386 code with stack-based arg passing. # -ms = separate code & data 4GB segments (32-bit builds only). # -mf = flat memory model code+data in one 4GB segment (ditto). # -zc = place literal strings in code segment. # -N4M = Big stack (increase the digit upon SIGSEGVs at runtime). # chars are unsigned by default (-j makes them signed by default). # -NOUUCP is included because QNX doesn't use it. # Add these to the end if you like but they dump core on my QNX 4.25 system: # # @wermit -h >use.qnx # @usemsg wermit use.qnx # @rm use.qnx # # If you get warnings about HEADER or C_IN add -DNO_DNS_SRV. # OK 2011/06/14 qnx32: @echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit...' $(MAKE) xermit \ "LNKFLAGS = -N4M -3r" \ "CFLAGS = -ms -3r -DQNX -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \ -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \ -DNOINITGROUPS -DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \ "LIBS= -lsocket -lncurses -ltermcap" # As above but no networking since some QNX systems do not have TCP/IP # installed, or the TCP/IP developers kit, which includes all the needed # header files. This entry has not been tested on a QNX system that, in # fact, does not have TCP/IP installed; some adjustments might be necessary, # in particular regarding the use of select(): is -lsocket needed, can we # get the needed definitions from non-TCP/IP header files (FD_SET, etc)? qnx32nonet: @echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit, no net...' $(MAKE) xermit \ "LNKFLAGS = -N4M -3r" \ "CFLAGS = -3r -ms -DQNX -DNONET -DNOIKSD -DCK_CURSES \ -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \ -DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \ "LIBS= -lsocket -lncurses -ltermcap" @wermit -h >use.qnx @usemsg wermit use.qnx @rm use.qnx # Synonym for qnx32. qnx: $(MAKE) qnx32 "KFLAGS=$(KFLAGS)" # QNX 4.21 and above, 16-bit version, Watcom C 8.5 - and higher on i286 PCs # and above. # # IMPORTANT: Do not use Watcom C 10.6!!! # If you have it installed, add "-v9.52 to CFLAGS" # # NOTE: QNX 4.23 onward does not work on 286's anyway. # Stacksize 26000, objects larger than 100 bytes in their own segments, # string constants to the codesegment, etc. Fully configured except job ctrl. # This entry works for building a 16-bit executable on a 32-bit system, but # has not been tested on a 16-bit system. Uses large memory model, links # explicitly with large-model sockets library. Correct-model curses library # is chosen automatically. See comment in qnx32 entry about -DNOUUCP. # # WARNING: # # Watcom C prior to 10.6 never had released curses library. To link against it, # you must obtain ported free curses source from ftp://ftp.qnx.com/usr/free, # then compile and build library (cursesl.lib) and place it in /usr/lib. You # must also copy curses.h to /usr/include. Be aware that if you have Watcom # 10.6 installed, you should already have curses.h, which is the new ncurses # library. You must back it up and use free curses.h instead, since ncurses is # only for 32-bit applications and some definitions in these files are # different (e.g., clearok()). For safety, curses is not defined in build. # # In 7.0 -DNOHELP added to keep ckuus2.c from blowing up; NOCSETS and NOSPL # added because ckuus4 was blowing up, and NOFLOAT just because it seemed # dangerous (remove -DNOFLOAT if you want to try it), The result works OK # except for some mysterious beeps upon termination of the top-level keyword. # # Things to try next time we get in trouble: # . Change -zt100 to something smaller like -zt25 # . Change -Oatx to -Omilerat (enable stack checking) # . Maybe get rid of -v9.52 -- it's only there because we were warned. # qnx16: @echo 'Making C-Kermit $(CKVER) for QNX 4.21, 16-bit...' $(MAKE) xermit \ "LNKFLAGS = -2 -ml -N 26000" \ "CFLAGS = -2 -Oatx -zc -zt100 -ml -DQNX -DQNX16 -DNOUUCP -DNOHELP \ -DCK_REDIR -DSELECT -DSELECT_H -DNOJC -DNOGETUSERSHELL -DNOCSETS \ -v9.52 -DTCPSOCKET -DCK_RTSCTS -DCK_ANSIC -DNOINITGROUPS -DNOKVERBS \ -DNORANDOM -DNOCSETS -DNOSPL -DNOFLOAT -DPID_T=pid_t $(KFLAGS)" # QNX 4.1, 16-bit version, with Watcom C 8.5 on i286 PCs and above. # stacksize 26000, objects larger than 100 bytes in their own segments, # string constants to the codesegment, etc. Add -DNOUUCP if desired. qnx16_41: @echo 'Making C-Kermit $(CKVER) for QNX 4.1, 16-bit...' $(MAKE) xermit \ "LNKFLAGS = -mh -N 26000" "CFLAGS = -Wc,-fpc -Wc,-j -DNOGETUSERSHELL \ -Wc,-Ols -Wc,-zdf -Wc,-zc -Wc,-zt100 -mh -DPOSIX -DQNX -DDIRENT \ -DNOCYRIL -DNODEBUG -DNOMSEND -DMINIDIAL -DNOXMIT -DNOSCRIPT -DNOSPL \ -DNOSETKEY -DNOINITGROUPS -DQNX16 -DPID_T=pid_t $(KFLAGS)" # QNX Neutrino 2 (pwaechtler@qnx.de) crosscompiled on QNX 4.25. # Gets lots of compiler warnings. qnx_nto2+: @echo 'Making C-Kermit $(CKVER) for QNX Neutrino 2+ ' cc -o wart ckwart.c $(MAKE) xermit \ "CC = qcc -Vgcc_ntox86" \ "CC2 = qcc -Vgcc_ntox86" \ "LNKFLAGS = " \ "CFLAGS = -DNEUTRINO -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \ -DNOUUCP -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS \ -DNOJC -DNOINITGROUPS -DCK_ANSIC -DPID_T=pid_t -DUNIX -DDIRENT \ -DMYREAD -DBSD44ORPOSIX -DSVORPOSIX -DNDGPWNAM $(KFLAGS)" \ "LIBS= -lsocket -lncurses " # QNX 6 (= Neutrino 2.xx) native build (kirussel@cisco.com). qnx6: @echo 'Making C-Kermit $(CKVER) for QNX6' $(MAKE) xermit KTARGET=QNX6 \ "CFLAGS = -DPOSIX -DCK_POSIX_SIG -DNETPTY -DNOARROWKEYS \ -DUSE_TIOCSDTR -DBIGBUFOK -DCKMAXOPEN=100 -DRLOGCODE -DNOREALPATH \ -DMAXNAMLEN=48 -DQNX6 -DUSE_TERMIO -DINIT_SPTY \ -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DDYNAMIC \ -DTCPSOCKET -DNOGETUSERSHELL -DCK_REDIR -DSELECT -DSELECT_H \ -DCK_RTSCTS -DNOJC -DSVORPOSIX -DBSD44ORPOSIX -DNOUUCP -DCK_ANSIC \ $(KFLAGS) -O" \ "LIBS= -lsocket -lncurses" #MINIX/2.0 32 Bit version for intel 386+ running the POSIX-compliant MINIX # version 2.0 (The definition of fatal avoids a conflict with a symbol by # the same name in the curses library.) It is impossible to compile with # network support since Minix does not support Berkeley sockets. # Note: use chmem liberally on the compiler passes, make, and the final # kermit executable. (3 megabytes of memory for each is sufficient.) # From Terry McConnell, Syracuse U, and Will Rose. Will says: # The stacks for make and some compiler passes needed to be increased # with chmem as follows: # make 1MB # /usr/lib/em_cemcom.ansi 3MB # /usr/lib/em_opt 1MB # /usr/lib/i386/cg 1MB # /usr/lib/i386/as 1MB # The compiler temporary directory was set to /usr/tmp via the TMPDIR # environment variable; more than 1MB of temporary space was needed. # Kermit itself needs at least 1MB of stack. minix20: @echo 'Making C-Kermit $(CKVER) for MINIX 2.0/386...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} EXT=o \ "CFLAGS= -wo -DV7 -DMINIX2 -DMINIX -DSIG_V -D_POSIX_SOURCE \ -DCKCPU=\\\"i-386\\\" -DNOIKSD -Dfatal=myfatal -DCK_CURSES -DNOLEARN \ -DNOSYSLOG -DUSE_MEMCPY -DNOREALPATH $(KFLAGS)" "LIBS= -lcurses" #MINIX/386 (PC Minix modified by Bruce Evans in Australia for 386 addressing) # For MINIX 1.5+ (but < 2.0) minix386: @echo 'Making C-Kermit $(CKVER) for MINIX/386...' @echo 'TOTALLY UNTESTED!' $(MAKE) wermit EXT=s KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE -DNOLEARN $(KFLAGS)" #MINIX/386 Minix modified by Bruce Evans in Australia to use 386 addressing minix386gcc: @echo 'Making C-Kermit $(CKVER) for MINIX/386 with gcc...' @echo 'TOTALLY UNTESTED!' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC=gcc -g -O" "CC2=gcc -g" \ "CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE -DNOLEARN $(KFLAGS)" #MINIX - 68k version with ACK compiler. # If you have trouble compiling or running wart, "touch wart". # If it still doesn't work, "touch ckcpro.c". # The version configured below has many features removed, including # the TRANSMIT, MSEND, HELP, and SCRIPT commands, international # character set support, and the entire script programming language. # But it does have an interactive command parser. # Make sure make(1) has (at least) 100000 chmemory! # If you are using the Amsterdam C compiler, you might have to add "-D__ACK__". minix68k: @echo 'Making C-Kermit $(CKVER) for MINIX 68k with ACK...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE -DNOLEARN \ -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \ -DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \ -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V" #MINIX - 68k version with c68 compiler. # If you have trouble compiling or running wart, "touch wart" or # "touch ckcpro.c". Compiling ckudia.c (no -DNODIAL!) might fail. :-( # Give c68 250000 bytes of stack+heap; make sure make(1) has at least # 100000 chmemory. On a 1MB Atari ST this means that the recursive # call of make fails due to memory shortage. Try "make -n minixc68 >makeit", # followed by ". makeit". Otherwise, as above. minixc68: @echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...' $(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE -DNOLEARN \ -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \ -DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \ -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V" #MINIX - 68k version with c68 compiler. #A variation on the above that was recently (Sep 95) reported to work. minixc68a: @echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...' $(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE \ -DCK_ANSIC -DNODEBUG -DNOTLOG -DMINIDIAL -DEXTEN -DMYCURSES \ -DNOSCRIPT -DNOCSETS -DNOSPL -DNOJC -DDIRENT -DNOLEARN \ -DNOSETKEY -DNOESCSEQ $(KFLAGS) \ -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V" #MIPS Computer Systems with UMIPS RISC/OS 4.52 = AT&T UNIX System V R3.0. #Remove -DNOJC if job control can be safely used. mips: @echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC -DNOLEARN -DPID_T=int \ -DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)" #As above, but with TCP/IP and fullscreen support. mipstcpc: @echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC \ -DTCPSOCKET -DCK_CURSES -I/usr/include/bsd \ -DPID_T=int -DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)" \ "LIBS = -lcurses -lbsd" #Motorola Delta System V/68 R3, signal() is void rather than int. #Uses dirent.h and Honey DanBer uucp. Supports TCP/IP. #After building, use "mcs -d" to reduce size of the executable program. sv68r3: @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR3 -DSV68 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DTCPSOCKET \ -DNOUNICODE -DNOLEARN -DUSE_MEMCPY $(KFLAGS) -O" "LNKFLAGS =" #Motorola Delta System V/68 R3V5, signal() is void rather than int. #Uses dirent.h and Honey DanBer UUCP. Supports TCP/IP. #After building, use "mcs -d" to reduce size of the executable program. sv68r3v5: @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR3 -DSV68 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DUSE_MEMCPY \ -DTCPSOCKET -DINADDRX -DNOUNICODE -DFNFLOAT -DNOLEARN $(KFLAGS) -O" \ "LNKFLAGS =" "LIBS = -linet -lm" #Motorola MVME147 System V/68 R3 V5.1. Requires gcc 2.1 to compile. #After building, use "mcs -d" to reduce size of the executable program. sv68r3v51: @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5.1' $(MAKE) wermit "CC=gcc-delta" "CC2=gcc-delta" \ KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNODEBUG -DNO_DNS_SRV -DNOLEARN \ -DNOUNICODE -DFNFLOAT -DSV68 -DUSE_MEMCPY $(KFLAGS) \ -O2 -v -ftraditional" \ "LNKFLAGS = -s -v" "LIBS = -lm881 -lm" #Motorola MVME147 System V/68 R3V6. derived from Motorola Delta System R3V5. #Checked on larger Motorola System V/68 R3V6 (with NSE Network Services Ext.) #After building, use "strip" to reduce size of the executable program. # "LIBS = -lnsl" removed in C-Kermit 6.1 - put back if needed. # "LIBS = lm" added in 7.1/8.0 for floating-point math. # ckuusr.c clobbers the optimizer. sv68r3v6: @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V6' $(MAKE) ckuusr.$(EXT) KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSV68R3V6 -DDIRENT -DHDBUUCP -DNOLOGIN -DNOINITGROUPS \ -DNOSYMLINK -DNOREDIRECT -DNOGFTIMER -DTCPSOCKET -DDCLGETCWD -DSV68 \ -DNO_DNS_SRV -DNOUNICODE -DFNFLOAT -DSELECT -DUSE_MEMCPY $(KFLAGS)" $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSV68R3V6 -DDIRENT -DHDBUUCP -DNOLOGIN -DNOINITGROUPS \ -DNOSYMLINK -DNOREDIRECT -DNOGFTIMER -DTCPSOCKET -DDCLGETCWD -DSV68 \ -DNO_DNS_SRV -DNOUNICODE -DFNFLOAT -DSELECT -DUSE_MEMCPY $(KFLAGS)" \ "LNKFLAGS =" "LIBS = -lm" #Motorola Delta System V/88 R32, signal() is void rather than int. #Uses dirent.h and Honey DanBer uucp. Needs for setting #file dates. Supports TCP/IP. #After building, use "mcs -d" to reduce size of the executable program. sv88r32: @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R32...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -DSV88R32 -DDIRENT -DHDBUUCP -DTCPSOCKET \ -DSYSUTIMEH -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS) -O" \ "LIBS= -lcurses -lresolv" "LNKFLAGS = -s" #Motorola Delta System V/88 R40. Has , regular Berkeley #sockets library, i.e. in.h and inet.h are not misplaced in sys (rather than #netinet and arpa, respectively). Uses ANSI C constructs, advisory file #locking on devices, etc. curses support added. Reportedly, the #/usr/include/sys/vnode.h file has a bug which must be fixed before this #makefile entry can work correctly. The "if DEBUG" directive at about line #320 must be changed to "ifdef DEBUG" (Reportedly, this was fixed in #in System V/88 R4.3). #After building, use "mcs -d" to reduce size of the executable program. sv88r40: @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R40...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DMOTSV88R4 -DDIRENT -DHDBUUCP -DSTERMIOX \ -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG -DFNFLOAT \ $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -lresolv -lm" "LNKFLAGS = -s" #As above but without the floating-point math library. sv88r40nm: @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R40...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS = -O -DSVR4 -DMOTSV88R4 -DDIRENT -DHDBUUCP -DSTERMIOX \ -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS)" \ "LIBS= -lsocket -lnsl -lcurses -lresolv" "LNKFLAGS = -s" #As above but with floating-point math library support \ffp...() functions #and S-Expressions. #Olivetti X/OS R2.3, 3.x. #NOTES: # . If you build the executable on 2.x X/OS, it will also run on 3.x. # . If you build it on 3.x X/OS, it will NOT run on 2.x. # . Kermit can run with no privileges unless the uucp lines are protected, # in which case kermit must be owned by uucp with suid bit set: # chown uucp kermit ; chmod 4111 kermit. xos23: @echo 'Making C-Kermit $(CKVER) for Olivetti X/OS...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ 'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP $(KFLAGS)' \ "LIBS=" "LNKFLAGS=" #As above, but with curses. xos23c: @echo 'Making C-Kermit $(CKVER) for Olivetti X/OS with curses...' $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \ 'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP -DCK_CURSES $(KFLAGS)' \ "LIBS=-lcurses" "LNKFLAGS=" ckuuid: @echo 'building C-Kermit $(CKVER) set-UID/set-GID test programs' $(CC) -DANYBSD -DSAVEDUID -o ckuuid1 ckuuid.c $(CC) -DANYBSD -o ckuuid2 ckuuid.c $(CC) -DANYBSD -DNOSETREU -o ckuuid3 ckuuid.c $(CC) -DANYBSD -DSETEUID -DNOSETREU -o ckuuid4 ckuuid.c $(CC) -o ckuuid5 ckuuid.c @echo 'Read the top of ckuuid.c for directions...for testing' @echo 'you must make these programs setuid and setgid' ############################################################################ # A N T I Q U I T I E S # # The following are antique targets from C-Kermit 5A or earlier. They have # not been updated or tested in years. Most of them will need recent features # disabled, usually with some combination of -DNOUNICODE, -DNOIKSD, -DNOANSI, # -DNOCKGHNLHOST, -DNO_DNS_SRV, -DNOREDIRECT, -DNOREALPATH, -DNOCURSES, etc. # They are also missing the KTARGET=$${KTARGET:-$(@)} business. # For details see ckuins.txt and ckccfg.txt. # ############################################################################ #Berkeley Unix 2.8, 2.9 for PDP-11s with I&D space, maybe also Ultrix-11??? #C-Kermit(5A) is simply too large (even turning off almost every feature #available) to run without both I&D space plus overlays. The old comment #suggested running 'pcc' but that won't help. Changing 'cc' to 'ckustr.sed' #will cause a string extraction to be done, saving D space by moving strings #to a file. bsd29: @echo Making C-Kermit $(CKVER) for 2.8 or 2.9BSD. @echo Read the makefile if you have trouble with this... $(MAKE) ovwermit \ "CFLAGS= -DBSD29 -DNODEBUG -DNOTLOG -DNOCSETS -DNOHELP \ -DNOSCRIPT -DNOSPL -DNOXMIT -DNODIAL $(KFLAGS)" \ "LNKFLAGS= -i -lndir" "CC= cc " "CC2= cc" bsd210: @echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.10BSD. bsd211: @echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.11BSD. #Charles River Data Systems Universe with UNOS Version 9.2 crds: @echo 'Making C-Kermit $(CKVER) for Charles River Data Systems...' make xermit \ "CFLAGS = -DATTSV -DNOANSI -DDIRENT -DLONGFN -DTCPSOCKET \ -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DNOSETREU \ -Dsuspend=ksuspend $(KFLAGS) -O" "LNKFLAGS =" #Microport SV/AT for IBM PC/AT 286 and clones, System V R2. #The -O flag may fail on some modules (like ckuus2.c), in which case you #should compile them by hand, omitting the -O. If you get "hash table #overflow", try adding -DNODEBUG. #Also, reportedly this compiles better with gcc than with cc. mpsysv: @echo 'Making C-Kermit $(CKVER) for Microport SV/AT 286...' $(MAKE) wermit \ "CFLAGS= -DATTSV -DNOLEARN $(KFLAGS) -O -Ml" "LNKFLAGS = -Ml" #Microsoft "Xenix/286" e.g. for IBM PC/AT xenix: @echo 'Making C-Kermit $(CKVER) for Xenix/286' $(MAKE) wermit \ "CFLAGS= -DXENIX -DNOFILEH -DNOLEARN $(KFLAGS) -Dunix -F 3000 -i" \ "LNKFLAGS = -F 3000 -i" #PC/IX, Interactive Corp System III for IBM PC/XT pcix: @echo 'Making C-Kermit $(CKVER) for PC/IX...' $(MAKE) wermit \ "CFLAGS= -DPCIX -DISIII -DNOLEARN $(KFLAGS) \ -Dsdata=sdatax -O -i" "LNKFLAGS = -i" #Integrated Solutions Inc V8S VME 68020 isi: @echo Making C-Kermit $(CKVER) for 4.2BSD on ISI... $(MAKE) wermit "CC = cc" \ "CFLAGS= -DBSD4 -DTCPSOCKET -DINADDRX -DDCLPOPEN -DDEBUG -DNOSETREU \ -DCK_CURSES -DNOLEARN $(KFLAGS)" "LIBS = -lcurses -ltermcap" #Interactive Corp version of AT&T System III #is3: (very old, probably not sufficient for 5A or later) # @echo 'Making C-Kermit $(CKVER) for Interactive System III...' # make wermit "CFLAGS = -DISIII -Ddata=datax -O -i" "LNKFLAGS = -i" #The following should work, use it if you don't have gcc. #Use is3gcc if you have gcc. is3: @echo 'Making C-Kermit $(CKVER) for Interactive System III...' $(MAKE) wermit \ "CFLAGS= -DISIII $(KFLAGS) -Ddata=datax -DNAP -DHDBUUCP -DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O -i" "LNKFLAGS = -i" #Interactive UNIX System V R3, no network support. Uses and Honey #DanBer UUCP. If this entry does not compile correctly, try any or all of the #following. These suggestions also apply more or less to the other is5r3xxx #entries that follow this one. # . Remove the UID_T and GID_T definitions, or change them as required. # . Change -DDIRENT to -DSDIRENT. # . Add -DSIGTYP=void. # . Remove -g from LNKFLAGS. # . Add -DNOANSI to remove compiler complaints about ANSI C constructions # . Add other -DNOxxx's to save space (e.g. -DNOCSETS) # See the next few makefile entries for related examples. # Also see sys5r32is for making a portable i386 SVR3 binary. is5r3: @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...' @echo 'If this does not work please read the makefile entry.' $(MAKE) wermit \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS -DNOREALPATH \ -DUID_T=ushort -DGID_T=ushort -DI386IX $(KFLAGS)" \ "LNKFLAGS = -g" #Interactive Corp System System V R3 with gcc is3gcc: @echo 'Making C-Kermit $(CKVER) for Interactive System V R3 / gcc...' $(MAKE) wermit CC=gcc CC2=gcc \ 'CFLAGS = -D_SYSV3 -DISIII -Ddata=datax -DNAP -DHDBUUCP -DNOREALPATH \ -DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O' "LNKFLAGS =" #Interactive UNIX System V R3, POSIX variant. Untested. #Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry. is5r3p: @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...' $(MAKE) wermit \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS -DNOREALPATH \ -DI386IX -DPOSIX $(KFLAGS)" "LNKFLAGS=" "LIBS=-lcposix" #Interactive UNIX SVR3 2.2.1, job control, curses, no net, gcc. is5r3gcc: $(MAKE) wermit CC=gcc CC2=gcc \ "CFLAGS=-g -posix -DSVR3 -DDIRENT -DNOREALPATH \ -DHDBUUCP -O -DNOCSETS -DI386IX -DSVR3JC -DCK_CURSES \ $(KFLAGS)" LNKFLAGS="-posix" LIBS="-lcurses -lc_s" #Interactive UNIX System V R3 with TCP/IP network support. #Needs -linet for net functions. signal() is void rather than int. #Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry. #Also see is5r3net2 if you have trouble with this entry. is5r3net: @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...' @echo 'If this does not work please read the makefile entry.' $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET -DNOREALPATH \ -DI386IX $(KFLAGS) -O" "LIBS = -linet" is5r3netgcc: $(MAKE) is5r3net CC=gcc CC2=gcc #Interactive UNIX System V R3, no job control, signal() void rather than int. #Uses dirent.h and Honey DanBer uucp. Needs -linet for net functions. #Read comments in is5r3 entry. Use this entry if is5r3net fails. #Saves some space by stripping (-s) and using shared library (-lc_s). is5r3net2: @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...' $(MAKE) wermit \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET -DNOJC -DNOREALPATH \ -DSIGTYP=void -DNOANSI -DI386IX $(KFLAGS) -O" \ "LNKFLAGS= -s" "LIBS = -linet -lc_s" #Interactive UNIX System V R3 (version 2.2 or later) with job control & curses. #Uses dirent.h and Honey DanBer UUCP. is5r3jc: @echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...' $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \ -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \ -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD \ $(KFLAGS)" "LIBS=-lcurses -lc_s -linet" is5r3jcgcc: $(MAKE) is5r3jc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \ KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)" #Sunsoft/Interactive UNIX System V R3 (version 2.2 or later) #with job control, curses, and TCP/IP networking. #Uses dirent.h and Honey DanBer UUCP. is5r3netjc: @echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...' $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \ -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \ -DPOSIX_JC -DCK_REDIR -DTCPSOCKET -DSELECT \ $(KFLAGS)" "LIBS=-linet -lcurses -lc_s" is5r3netjcgcc: $(MAKE) is5r3netjc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \ KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)" #Masscomp System III rtu: @echo 'Making C-Kermit $(CKVER) for Masscomp RTU System III...' $(MAKE) wermit \ "CFLAGS= -UFIONREAD -DATTSV $(KFLAGS) -O" "LNKFLAGS =" "LIBS= -ljobs" #Masscomp/Concurrent RTU 4.0 or later, Berkeley environment. #Includes = /usr/include/ndir.h #Note "LIBS = -lndir" might not be necessary because of "ucb make". rtubsd: @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...' ucb make wermit \ "CFLAGS= -DBSD4 -DRTU -DNDIR -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \ "LIBS = -lndir" #Masscomp/Concurrent RTU 4.0 or later, same as above, #Includes "usr/lib/ndir.h" #Note "LIBS = -lndir" might not be necessary because of "ucb make". rtubsd2: @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...' ucb make wermit \ "CFLAGS= -DBSD4 -DRTU -DXNDIR -DHDBUUCP $(KFLAGS)" \ "LIBS = -lndir" #Masscomp/Concurrent RTU 4.0 or later, same as above, #Includes #Note "LIBS = -lndir" might not be necessary because of "ucb make". rtubsd3: @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x BSD...' ucb make wermit "CFLAGS= -DBSD4 -DRTU -DHDBUUCP $(KFLAGS)" \ "LIBS = -lndir" #Masscomp/Concurrent RTU 4.0 or later, System V R2, using . #In case of problems, add back the -DRTU switch. #In case -DTCPSOCKET gives trouble, remove it. rtus5: @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x...' $(MAKE) wermit \ "CFLAGS= -DATTSV -DHDBUUCP -DDIRENT -DTCPSOCKET $(KFLAGS)" #Masscomp/Concurrent RTU 4.x, System V R3, using . #Use this one if rtus5 gives warnings about pointer type mismatches. #In case of problems, add back the -DRTU switch. rtus5r3: @echo 'Making C-Kermit $(CKVER) for Masscomp RTU Sys V R3...' $(MAKE) wermit "CFLAGS= -DSVR3 -DHDBUUCP -DDIRENT $(KFLAGS)" #DEC Pro-3xx with Pro/Venix V1.0 or V1.1 # Requires code-mapping on non-I&D-space 11/23 processor, plus some # fiddling to get interrupt targets into resident code section. # This almost certainly doesn't work any more. provx1: @echo 'Making C-Kermit $(CKVER) for DEC Pro-3xx, Pro/Venix 1.x...' $(MAKE) wart "CFLAGS= -DPROVX1 $(KFLAGS)" "LNKFLAGS= " $(MAKE) wermit "CFLAGS = -DPROVX1 -DNOFILEH -md780" \ "LNKFLAGS= -u _sleep -lc -md780" #Nixdorf Targon/31. #AT&T UNIX System V R3, signal() is void rather than int. #Uses dirent.h without Honey DanBer uucp. t31tos40x: @echo 'Making C-Kermit $(CKVER) for Targon/31 with TOS 4.0.xx...' $(MAKE) wermit \ "CFLAGS= -DSVR3 -DDIRENT $(KFLAGS) -O" \ "LNKFLAGS=" #NCR Tower 1632, OS 1.02 tower1: @echo 'Making C-Kermit $(CKVER) for NCR Tower 1632, OS 1.02...' $(MAKE) wermit "CFLAGS= -DTOWER1 $(KFLAGS)" #NCR Tower 32, OS Release 1.xx.xx tower32-1: @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 1 System V R2...' @echo 'Add KFLAGS=-DISDIRBUG if you get errors about S_ISREG/S_ISDIR.' $(MAKE) wermit \ "CFLAGS = -DATTSV $(KFLAGS) -O" "LNKFLAGS = -n" #NCR Tower 32, OS Release 2.xx.xx tower32-2: @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 2 System V R2...' $(MAKE) wermit \ "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -O2" \ "LNKFLAGS = -n" #NCR Tower 32, OS Releases based on System V R3 #Don't add -DNAP (doesn't work right) or -DRDCHK (not available in libc). tower32: @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3...' $(MAKE) wermit \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \ -DUID_T=ushort -DGID_T=ushort -O1" #NCR Tower 32, OS Releases based on System V R3 tower32g: @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3, gcc...' $(MAKE) wermit "CC = gcc" \ "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \ DUID_T=ushort -DGID_T=ushort -O -fstrength-reduce -fomit-frame-pointer" #Fortune 32:16, For:Pro 1.8 (mostly like 4.1bsd) ft18: @echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 1.8...' $(MAKE) wermit \ "CFLAGS= -DNODEBUG -DBSD4 -DFT18 -DNOFILEH $(KFLAGS) \ -DPID_T=short" #Fortune 32:16, For:Pro 2.1 (mostly like 4.1bsd). #The modules that break the optimizer are compiled separately. ft21: @echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 2.1...' $(MAKE) ckuusx.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \ -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \ "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet" $(MAKE) ckuxla.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \ -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \ "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet" $(MAKE) ckudia.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \ -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \ "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet" $(MAKE) wermit \ "CFLAGS= -O -DNODEBUG -DBSD4 -DFT21 -DNOFILEH -SYM 800 \ -DCK_CURSES $(KFLAGS) -DPID_T=short" \ "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet" #Valid Scaldstar #Berkeleyish, but need to change some variable names. valid: @echo 'Making C-Kermit $(CKVER) for Valid Scaldstar...' $(MAKE) wermit \ "CFLAGS= -DBSD4 -DNODEBUG -DNOTLOG -Dcc=ccx -DFREAD=1 $(KFLAGS)" #IBM IX/370 on IBM 370 Series mainframes #Mostly like sys3, but should buffer packets. ix370: @echo 'Making C-Kermit $(CKVER) for IBM IX/370...' $(MAKE) wermit "CFLAGS = -DIX370 -DATTSV $(KFLAGS) -i -O" \ "LNKFLAGS = -i" #Amdahl UTS 2.4 on IBM 370 series compatible mainframes. #Mostly like V7, but can't do initrawq() buffer peeking. uts24: @echo 'Making C-Kermit $(CKVER) for Amdahl UTS 2.4...' $(MAKE) wermit "CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \ -DUTS24 -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \ -DNPTYPE=$(NPTYPE) $(DIRECT) $(KFLAGS)" #Amdahl UTSV UNIX System V = System V R2 or earlier. utsv: @echo 'Making C-Kermit $(CKVER) for Amdahl UTSV...' $(MAKE) wermit \ "CFLAGS = -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i" #Amdahl UTSV UNIX System V = System V R2 or earlier, with TCP sockets library. utsvtcp: @echo 'Making C-Kermit $(CKVER) for Amdahl UTSV w/tcp...' $(MAKE) wermit "CFLAGS = \ -DTCPSOCKET -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i" \ "LIBS = -lsocket" #BBN C/70 with IOS 2.0 #Mostly Berkeley-like, but with some ATTisms c70: @echo 'Making C-Kermit $(CKVER) for BBN C/70 IOS 2.0...' $(MAKE) wermit "CFLAGS= -DBSD4 -DC70 $(KFLAGS)" #Zilog ZEUS 3.21 zilog: @echo 'Making C-Kermit $(CKVER) for Zilog Zeus 3.21...' $(MAKE) wermit \ "CFLAGS = -DATTSV -DZILOG -DNODEBUG $(KFLAGS) -i -O" \ "LNKFLAGS = -i -lpw" #Whitechapel MG-1 Genix 1.3 white: @echo 'Making C-Kermit $(CKVER) for Whitechapel MG-1 Genix 1.3...' @touch ckcpro.c $(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)" #Pixel 1000 pixel: @echo 'Making C-Kermit $(CKVER) for Pixel 1000...' $(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)" ptx: $(MAKE) "MAKE=$(MAKE)" dynixptx12 #CDC VX/VE 5.2.1 vxve: @echo 'Making C-Kermit $(CKVER) for CDC VX/VE 5.2.1...' $(MAKE) wermit \ "CFLAGS = -DATTSV -DVXVE -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \ "LNKFLAGS = -i" #DIAB DS90 or LUXOR ABC-9000 with pre-5.2 DNIX. Sys V with nap() and rdchk(). # nd = no opendir(), readdir(), closedir(), etc. # Some of the modules fail to compile with -O. dnixnd: @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with very old DNIX 5.2.' $(MAKE) wermit \ "CFLAGS = -DATTSV -DNAP -DRDCHK -DDCLPOPEN \ -U__STDC__ $(KFLAGS)" #DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk(). # This one has opendir(), readdir(), closedir(), etc. # Some of the modules fail to compile with -O. dnix: @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...' $(MAKE) wermit \ "CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \ -U__STDC__ $(KFLAGS)" #DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk(). # As above, but with curses and TCP/IP. # You might get complaints about redefinition of O_RDONLY, etc, because # of bugs in the DNIX header files, which can be fixed by adding #ifndef... # around the offending definitions in the header files. dnixnetc: @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...' $(MAKE) wermit \ "CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \ -DTCPSOCKET -DCK_CURSES -I/usr/include/bsd -U__STDC__ $(KFLAGS)" \ "LIBS = -ln -lcurses" #DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk(). dnix5r3: @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...' @echo 'with Honey DanBer UUCP' $(MAKE) wermit \ "CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \ -DCK_CURSES -DRENAME $(KFLAGS) -O" "LIBS= -lcurses" #DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk() + TCP/IP dnix5r3net: @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...' @echo 'with Honey DanBer UUCP and TCP/IP' $(MAKE) wermit \ "CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \ -DTCPSOCKET -DCK_CURSES -DRENAME $(KFLAGS) -O \ -I/usr/include/bsd" "LIBS = -ln -lcurses" #DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(), #ANSI C compilation and libraries. #Note that for DNIX 5.3 2.2 you have to correct a bug in /usr/include/stdlib.h: #change "extern void free(char *str);" #to "extern void free(void *str);" #NOTE: This bug is reportedly fixed in DNIX 5.3 2.2.1. #Should you get fatal errors caused by harmless pointer-type mismatches, #like between signed and unsigned char, just remove -X7. dnix5r3ansi: @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...' @echo 'with ANSI C Honey DanBer UUCP' $(MAKE) wermit \ "CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \ -DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS)" \ "LIBS= -lcurses" #DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(), # + TCP/IP, ANSI C compilation and libraries. #Should you get fatal errors caused by harmless pointer-type mismatches, #like between signed and unsigned char, just remove -X7. dnix5r3ansinet: @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...' @echo 'with ANSI C Honey DanBer UUCP' $(MAKE) wermit \ "CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \ -DTCPSOCKET -DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS) \ -I/usr/include/bsd" "LIBS= -ln -lcurses" #Ridge 32 with ROS 3.2 ridge32: @echo 'Making C-Kermit $(CKVER) Ridge 32 ROS 3.2' $(MAKE) wermit \ "CFLAGS = -DATTSV -DNOFILEH -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \ "LNKFLAGS = -i" #Altos 486, 586, or 986 with Xenix 3.0 altos: @echo 'Making C-Kermit $(CKVER) for Altos x86 with Xenix 3.0...' $(MAKE) wermit \ "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \ "LNKFLAGS= -i" #Altos 986 with Xenix 3.0, as above, but command-line only, minimal size. #For systems with small memories. It might also be necessary to chop certain #modules up into smaller pieces, e.g. ckuus3-6, because of symbol table #overflow. If this makefile is too big or complex for the Altos, compile #and link by hand or write shell scripts. altosc: @echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, remote...' $(MAKE) wermit \ "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \ -DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOICP $(KFLAGS) -Mm -O" \ "LNKFLAGS= -Mm -s" #Altos 986 with Xenix 3.0, as above, but interactive only, minimal size. altosi: @echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, local...' $(MAKE) wermit \ "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \ -DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOCMDL -DNOFRILLS -DNOHELP \ -DNOSETKEY $(KFLAGS) -Mm -O" "LNKFLAGS= -Mm -s" # Altos ACS68000 68000 System, UNIX System 3 Release 2, 512k memory. # also needs getcwd() external function; see ckuins.txt file. # also, sys/types.h needed modifying: # #ifdef __SYS_TYPES_H__, #define ..., #endif # also, ckuus2.c MUST be compiled NOOPT else symbol table is destroyed! # Submission by Robert Weiner/Programming Plus, rweiner@progplus.com. # altos3: @echo 'Making C-Kermit $(CKVER) for Altos ACS68k UNIX System III' $(MAKE) ckuus2.$(EXT) "CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \ -DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i" $(MAKE) wermit \ "CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \ -DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i -O" \ "LNKFLAGS = -i" "LIBS = getcwd.$(EXT)" #MINIX - Original PC version with 64K+64K limit. # Reportedly, the linker (asld) can run out of space while linking. The only # way around this is to make a copy of libc.a from which all modules that are # not used by Kermit are removed. If you have trouble compiling or running # wart, "touch wart". If that doesn't help, "touch ckcpro.c". # The version configured below has no interactive command parser. # If you can build this version successfully, maybe there will be room for # a minimal interactive command parser too; try replacing -DNOICP with # -DNOSPL, plus every other -DNOxxx flag there is, except for -DNOICP # (see ckccfg.txt). minix: @echo 'Making C-Kermit $(CKVER) for MINIX, no command parser...' @echo 'TOTALLY UNTESTED!' $(MAKE) wermit EXT=s \ "CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \ -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V \ -DNOXMIT -DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \ -DNOSCRIPT -DNOCSETS -DNOICP -DNOSETKEY $(KFLAGS)" \ "LNKFLAGS= -i -T" #MINIX - PC version with 64K+64K limit, new (as yet unreleased) ACK 2.0 beta C #compiler, which outputs .o object files, rather than .s. But 'make' still #expects .s files, so must be patched to use .o. Tested on Minix 1.5.10. minix15: @echo 'Making C-Kermit $(CKVER) for MINIX (new ACK 2.0 compiler),' @echo 'no command parser... TOTALLY UNTESTED!' $(MAKE) wermit \ "CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \ -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V -DNODIAL \ -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOICP $(KFLAGS)" \ "LNKFLAGS= -i -T" #MINIX3 - MINIX 3.0 (no VM) - May-Aug 2005 (not sure if this ever worked...) minix3: @echo 'Making C-Kermit $(CKVER) for MINIX3...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -DMINIX2 \ -DMINIX3 -DNO_PARAM_H -DNOSYSLOG -DNOGETUSERSHELL \ -DNOINITGROUPS -DNOFTRUNCATE -DNOARROWKEYS -DDNOREALPATH \ -DTCPSOCKET -DNOTIMEZONE -DNOFTP -DNO_DNS_SRV -O" #MINIX315 - MINIX 3 1.5 - January 2010 minix315: @echo 'Making C-Kermit $(CKVER) for Minix 3 1.5...' $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \ "CFLAGS= -DMINIX315 -DPOSIX -DNOUUCP -DNOJC -DNOLEARN $(KFLAGS) \ -DHAVE_OPENPTY -DNO_PARAM_H -DNOSYSLOG -DNOGETUSERSHELL \ -DSYSTIMEH -DNOINITGROUPS -DNOFTRUNCATE -DNOARROWKEYS -DNOREALPATH \ -DTCPSOCKET -DNOTIMEZONE -DNO_DNS_SRV -DNOFTP -O" #PFU Compact A Series UNIX System V R3, SX/A TISP V10/L50 (Japan) #Maybe the -i link option should be removed? sxae50: @echo 'Making C-Kermit $(CKVER) for PFU SX/A V10/L50...' $(MAKE) xermit \ "CFLAGS= -DSVR3 -DDIRENT -DsxaE50 -DTCPSOCKET $(KFLAGS) -i -O" \ "LNKFLAGS= " #Tektronix 6130, 4319, 4301, etc, with UTek OS, /usr/spool/uucp/LCK./... #The models that support hardware flow control. utek: @echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, hardware flow control' $(MAKE) wermit \ "CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \ -DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \ -DTRMBUFL=2048 -DCK_DTRCTS $(KFLAGS)" #Tektronix 4315, 4316, 4317 with UTek OS, /usr/spool/uucp/LCK./... #The models that do not fully support hardware flow control. uteknohwfc: @echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, no h/w flow control' $(MAKE) wermit \ "CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \ -DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \ -DTRMBUFL=2048 $(KFLAGS)" #Tektronix XD88 with UTekV OS utekvr3: @echo 'Making C-Kermit $(CKVER) for Tektronix XD88 UTekV R3...' $(MAKE) wermit \ "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP \ -DTCPSOCKET -DSYSUTIMEH -DCK_CURSES $(KFLAGS) -O" \ "LIBS= -lcurses" "LNKFLAGS= -s" #Perkin-Elmer 3200 Xelos R02 or earlier ccop1: @echo 'Making C-Kermit $(CKVER) for Xelos & Public Domain Dirent calls' @echo 'or System V R2 or earlier...' $(MAKE) wermit \ "CFLAGS = -DATTSV -Dvoid=int -DDIRENT -DCK_CURSES \ $(KFLAGS) -O" "LNKFLAGS =" "LIBS= -lcurses -ltermlib" #Encore, UMAX 4.3 (BSD) but without acucntrl program. encore: $(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=$(KFLAGS)" #Encore, as above, but with curses file transfer display included. encorec: $(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=-DCK_CURSES $(KFLAGS)" \ "LIBS= -lcurses -ltermcap" #Encore, UMAX 4.3 (BSD) but without acucntrl program. umax43: @echo Making C-Kermit $(CKVER) for Encore UMAX 4.3... $(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \ "CFLAGS= -DBSD43 -DENCORE -DTCPSOCKET $(KFLAGS) -O" #Encore, UMAX 4.2 (BSD) umax42: @echo Making C-Kermit $(CKVER) for Encore UMAX 4.2... $(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \ "CFLAGS= -DBSD4 -DENCORE -DTCPSOCKET $(KFLAGS) -O" #Encore 88K UMAX 5.3 with TCP/IP support encore88k: @echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP...' $(MAKE) xermit \ "CFLAGS = -q ext=pcc -DSVR3 -DTCPSOCKET -DDIRENT \ -DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS =" #Encore 88K UMAX 5.3 with TCP/IP support encore88kgcc: @echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP, gcc...' $(MAKE) xermit CC=gcc CC2=gcc \ "CFLAGS = -DSVR3 -DTCPSOCKET -DDIRENT \ -DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS =" #SONY NEWS, NEWS-OS 4.01C sonynews: @echo Making C-Kermit $(CKVER) for SONY NEWS-OS 4.01C... $(MAKE) xermit "CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O" #Run Lint on this mess for selected versions. #These are pretty much obsolete since ANSI C / gcc. lintsun: @echo 'Running Lint on C-Kermit $(CKVER) sources for SunOS version...' lint -x -DSUNOS4 -DDIRENT -DTCPSOCKET -DSAVEDUID \ ck[cu]*.c > ckuker.lint.sun lintbsd: @echo 'Running Lint on C-Kermit $(CKVER) sources for BSD 4.2 version..' lint -x -DBSD4 -DTCPSOCKET ck[cu]*.c > ckuker.lint.bsd42 lints5: @echo 'Running Lint on C-Kermit $(CKVER) sources for Sys V version...' lint -x -DATTSV ck[cu]*.c > ckuker.lint.s5 #Who remembers TECO? love: @echo 'Not war?'